China 15kw to 1500kw Electricity Power Natural Gas Generator

Product Description

15kw to 1500kw Electricity Power Natural Gas Generator
ONEW diesel generators are strong-built, ideal for emergency back-up,job sites and industrial appplications.
Powered by reliable air/water cooled diesel generators sets, industrial grade, great fuel efficiency, less maintenance, long operating life.
Low oil shut-down provides added safety against engine damage.
8-10hours long run fuel tanktank with fuel gauge.
stainless steel parts with door lock and hinge fuel tank lock.
Strong frame/capony, durable and strong protection and security on the job.
Hour meter / maintenance resets – easily monitor run time and track maintenance intervals.
Optional ATS sockets for connecting with an external automatic transfer switch.

genset type

rated output

Engine
(Kofo)

Alternator
(Copy stamford)

control

KW/KVA

model

model

Comap

GF2-111

80/100

R6105ZLDS

ON-80KW
(100%COPPER)

Comap
IL3AMF9

Genset SIZE

2700x1050x1470mm(4.42cbm)

Weight

1295kgs

Fuel comsuptions 100%Loading

24L/H

Base Fuel tank

8-10hours fuel tank

Engine Data sheet

Engine model

R6105ZLDS

%
Steady speed adjusting rario at rated condition

≤5

Type

Water cooling,in line,four-stroke,wet liner and direct injection

Mpa
Oil pressure

0.3-0.5

Number of cylinders

6

r/min
Idling speed

≤650

Bore/Stroke mm

105-125

Mpa
Oil pressure at idle speed

≥0.10

Displancement L

6.49

g/kW.h
Oil consumption rate

1.63

Compression ratio

16:1

L
Oil sump capacity

18

Aspiration

turbo & inter cooler

Starting method

Electric motor start

Rated output kW

100

Lubricating method

Pressure lubrication

Rated speed r/min

1500

Crankshaft rotating direction

Counter clockwise(face to output end)

g/kW.h
Fuel consumption rate

≤231

Fring order

1-5-3-6-2-4

r/min
No load Speed

≤1575

Net mass kg

620

Alternator data sheet

Brnad

Copy stamford

Pressure regulating mode

AVR automatic pressure regulation

model

ON-80KW

bearing

Long life and no need maintencances

Prime power

80kw

Class of insulation

H grade

Exciation mode

Brushless self-excitation

protection

IP23

Power factor

0.8

 

 

ONEW has been focusing solely on diesel products since day one.Products includes AIR/WATER COOLED DIESEL ENGINES, GENERATORS sets and Spare Parts. ONEW Generators to power their homes, factory, contructions,resell, etc.
Click for further information.



Warranty

The products will be tested stricly 1 by 1 before delivery with testing video to customer.
Germany production processes and quality standards to guarantee the good quality.
Our warranty is 1 year or 1000 running hours whichever comes first.
But based on some special project,we can extended our warranty period.
Please help us to find out the problem, and we will offer free components for service.
All products will be well packaged and will not be damaged in transit.

FQA

1.How to buy your product?
You can place an order directly through the start order of Made in china
or send email ,add to talk
2.Do buyers need to contact the seller after placing an order?
No, we will contact you as soon as possible by made in china and prepare to ship.
3.How long does it take to receive the product after placing an order?
3-15 days from deposit, after your order, we will contact you and tell you the specific time.
4.how many MOQ?
MOQ is 1
5. Are you a manufacturer or trading company?
We have large factorys, R&D teams and foreign trade teams.
6.How spare parts supply of generator?
We can send u free spare parts during warranty by DHL
7.What kind of diesel use?
#0 diesel
8.How could I trust you?
Diesel Service & Supply stands behind the quality of all the used generators and industrial power equipment we sell. If you are not convinced by the pictures, videos, check-in reports, load tests, customer experiences and sales associates’ knowledge about the generator you are interested in, then we invite you to come visit our expansive yard and shop facility to witness a load test and see the professional operation we have going on here.
ONLINE PAYMENT TRADE ASSURANCE AVAILABLE

If You Are Interesting In ONEW, Pls Contace Us Freely ,Welcome To Visit ONEW!!

 

A Buyer’s Guide to Air Compressor Types

There are many types of Air Compressors, and it’s important to understand what each type has to offer. In this article, we’ll discuss single stage air compressors, low-noise compressors, and models with 2 pistons. But, before you buy an Air Compressor, be sure to read our buyer’s guide to the various types. This way, you’ll have all of the information you need to make the right decision for your business.
air-compressor

Single-stage air compressors

A single-stage air compressor is an excellent choice for most general-purpose purposes. They provide enough power to operate pneumatic tools, and they produce less heat. Single-stage air compressors, however, are not suitable for heavy-duty industrial uses. However, they can be used in various applications, including auto shops, gas stations, and various manufacturing facilities. They are also suitable for borewells and other high-pressure places.
These air compressors are a great choice for home use and are suitable for small-scale businesses, contractors, and small shops. These compressors have continuous duty cycles, cast iron compressor pumps, and a minimum 5,000-hour pump life. They also feature advanced features, including ODP motors, Auto Start & Controls, Receiver tanks, and power cords. They have low maintenance and can save you a great deal of money.
Single-stage air compressors are generally less expensive and lighter than their two-stage counterparts. Single-stage air compressors are also more portable, which is a plus for small projects. While two-stage compressors offer higher CFM, they are more powerful and bulky, making them unsuitable for small or home use. So it is essential to determine what you will use the air compressor for and decide on a model based on your needs.
A single-stage air compressor is made of a piston and a tank. The piston moves rapidly inside the cylinder and exerts pressure on the cylinder. This means that the piston can’t move any faster than the air pressure outside the cylinder. The piston is designed to operate in the same way for each stage. This is a great choice for home shops and one-man automotive shops, as it allows you to control the pressure without sacrificing the pump’s life.
Single-stage air compressors are often cheaper than two-stage versions, but they are not the best choice for every application. If you are only using your air compressor occasionally, you’ll find a one-stage model to be much more reliable than a two-stage model. The main difference between the 2 types of compressors is in the amount of air that each stage compresses. A two-stage air compressor will have more air storage capacity, but it will still produce more pressure.

Rotary vane compressors

Rotary vane compressors use a centrifugal pump to compress air. The rotor is set eccentrically in the housing, which almost touches the vane. As the rotor turns, the air that enters the pump is trapped between the vanes. This compressed air undergoes compression as the rotor rotates. Vanes are small pieces of carbon fiber or graphite composite. Vanes may be made of different materials depending on the application.
While rotary vane pumps are not commonly used to produce compressed air, they are widely used in automotive and hydraulic applications. Chances are, you have used a rotary vane pump at some point in your life. These pumps are also common in the vacuum and compressed air industries. As a result, many people don’t realize that they’re still around. They feature slots that allow the vanes to slide in and out of the rotor.
A rotary vane compressor has a drum and rotor inside. The rotor is eccentrically positioned and has slots and grooves on its surface. Its inlet and outlet ports are situated off-center, allowing the vanes to be pushed out by centrifugal force. Because the rotor rotates so quickly, air is trapped between the vanes. This air then becomes pressurized by the rotating rotor.
Rotating vane compressors can be easily serviced and repaired. A simple replacement of carbon vanes requires just 15 minutes and common tools. The carbon vanes typically last 9 to 18 months, depending on system operating pressure. Before purchasing a rotary vane compressor, make sure to check whether it has been properly performance-tested and has a warranty. Generally, warranties cover the rotor/stator chambers but do not cover the vanes or air filters. You should also check if the unit is covered by a lightning or water damage warranty.
Rotary vane compressors are an integral part of manufacturing industries. Many pharmaceutical manufacturing facilities depend on rotary vane compressors to control their equipment. Other industries that use rotary vane compressors include the plastics, woodworking, natural gas, and medical & dental fields. Their benefits are numerous and far outweigh any disadvantages of rotary screw compressors. For example, a rotary vane compressor can double the life of a conventional compressor.
air-compressor

Rotary vane compressors with low-noise models

If you are looking for a rotary vane air compressor, you have come to the right place. CZPT’s LV Series rotary vane compressors offer low-noise models, compact size, and robust integration. In addition to their low-noise features, they feature large filter systems to deliver high-quality compressed air. The LV Series models also feature CZPT’s reputation for reliability and quality.
This type of compressor uses centrifugal force to operate and is limited in its top and minimum operating speeds. They are only a third as powerful as screw compressors, and their top speed limits are much lower. Furthermore, the vanes wear out easily at high speeds because there is not enough centrifugal force to seal them against the cylinder’s edges. Even at half their full capacity, they consume as much as 80% of their total energy rating.
Because piston compressors produce a lot of noise, factory owners and shop owners have begun to install noise-dampening cabinets and other solutions. But, rotary vane compressors produce far less noise than a traditional vacuum, and the maintenance costs are also low. Rotary vane compressors are also extremely helpful in several industries. They are used in the automotive and auto finishing industries, as well as in dairy industries and milking machines.
If you have a deep pond, a rotary vane air compressor kit can pump up to 20 feet of water. This is more than enough airflow for 2 to 5 diffusers. A 1/4 HP rotary vane kit pumps around 4.2 CFM. It also helps to increase circulation and oxygen levels in the pond. Finally, a 1/4 HP kit offers the necessary power to clean up the bottom of a pond.
The rotary vane and rotary screw are the most popular air compressors today. While they are similar in many ways, they are more versatile and durable than their counterparts. They use fewer angular contact ball bearings and require less frequent maintenance than piston air compressors. Compared to piston air compressors, rotary vane and rotary screw compressors are quieter and are less expensive.
air-compressor

Rotary vane compressors with 2 pistons

The rotary vane and rotary screw compressors are similar in application, but both have different advantages and disadvantages. This article will compare the benefits of each and highlight the differences between them. While both are commonly used in industrial applications, rotary vane compressors are preferred by many industries. These compressors also have a wide range of uses, ranging from automotive air tool operation to milking machines. These compressors also have the advantage of being quieter than piston-powered ones.
The current common rail position may not be suitable for pressure swirl injectors, but new positions have been tested and show improvements in specific energy values. Moreover, the current position is not required for external oil pumps. However, mass induction and expulsion have to be performed with utmost care. This article focuses on the design and efficiency of rotary vane compressors. You can find more information about this new design in the references mentioned below.
The advantages of this type of compressor are its low cost, compact size, and easy maintenance. Hence, they are preferred in low capacity applications. Moreover, they feature integrated vanes. The rotating vanes close the air gap and compress air towards the outlet. Compared to piston-powered compressors, these units are cheaper and more reliable. Therefore, you should choose 1 with the lowest price tag. You can also opt for rotary vane compressors that are oil-free.
Sliding vane compressors are another popular variant. They have a single cylinder connected to the compressor and are capable of operating at low speeds. This design also reduces the amount of friction and maintains volumetric efficiency. However, the sliding vane compressors suffer from high frictional losses. If you are looking for a more efficient rotary compressor, this is the best option. While sliding vane compressors have been in the spotlight for over a century, they are still quite young.
These compressors are easy to install and maintain. They are also quieter than piston compressors. They are also cheaper than piston-driven compressors. The energy efficiency and low price make them the perfect choice for any commercial or industrial application. If you’re looking for a small, compact compressor, the rotary vane has been proven to be the best choice for your needs. You should know that it has a long service life.

China 15kw to 1500kw Electricity Power Natural Gas Generator  China 15kw to 1500kw Electricity Power Natural Gas Generator