Product Description
Product Description
FULL INVERTER SWIMMING POOL HEAT PUMP
PREMIUM SERIES
Laswim Premium series swimming pool heat pump is powered by mature stepless DC inverter technology, which helps to greatly reduce the energy consumption while running silently, enabling the unit to reach extremely high COP up to 14. By smart conversion of compressor speed, fan motor speed and system pressure, this Premium series heat pump can provide amazing energy saving and silent performance.
Super silent running
Thanks to the full inverter technology, this Premium series pool heat pump can bring you much quieter swimming environment than a normal on/off pool heat pump, which is more friendly to your neighborhood.
COP up to 14
When maintaining pool temperature at 95% of pool season, the COP of this Premium series heat pump can be up to 14 when running at middle & low speed, which leads to the best energy saving performance and most silent pool environment.
Energy saving
Adjusting the operating frequency of its compressor and fan motor automatically according to the heating or cooling demand, Premium series heat pump runs at middle & low speed most of the time, it is nearly double energy saving than On/Off heat pump
Soft start & wide voltage application
By using stepless DC inverter compressor, the input current will start from 0 Amps to rated Amps steadily, to better protect the house electricity system. With its smart conversion, this premium series heat pump can be also adapted to wide voltage from 180~260V.
Eco-friendly refrigerant R32
Compared to other refrigerants widely used today, R32 is remarkable for its small environment impact and has a global warming potential(GWP) of 675, which is two-third lower than R410A, cuts 75% carbon emission and 75% F-gas quota cost.
Built-in Wi-Fi function
With Wi-Fi function, you can control your heat pump through a smart APP on the phone easily anywhere and anytime.
Other features
1.Twin-rotary DC inverter compressor
2.Reverse cycle defrosting with 4-way valve for quick & efficient defrosting
3.Design for operating air temperature as low as -10ºC
4.EEV technology: 10 times flexibility to adjust the gas flow and increase the COP by up to 20%
5.Spiral titanium heat exchanger: 40% higher efficiency than normal titanium heat exchanger.
6.Can be used for swimming pool heating or cooling.
Product Parameters
| Model | LS07-IFP1-S2C1 | LS09-IFP1-S2C1 | LS13-IFP1-S2C1 | LS16-IFP1-S2C1 | LS20-IFP1-S2C1 | LS24-IFP1-S2C1 |
| Performance condition: Air 27ºC/Water 27ºC/Humid.80% | ||||||
| Heating capacity(kW) | 1.4-7.2 | 1.9-9.3 | 2.6-13 | 3.2-16 | 4.1-20.5 | 4.8-24.4 |
| COP Range | 14.8-6.4 | 14.8-6.7 | 14.9-6.4 | 14.5-6.4 | 14.6-6.4 | 14.8-6.0 |
| Average COP at 50% Speed | 9.8 | 9.7 | 9.8 | 9.6 | 9.7 | 9.8 |
| Performance condition: Air 15ºC/Water 26ºC/Humid.70% | ||||||
| Heating capacity(kW) | 1.0-5.0 | 1.3-6.5 | 1.8-9.1 | 2.3-11.5 | 2.8-14.0 | 3.4-16.8 |
| COP Range | 7.6-4.1 | 7.7-4.2 | 7.4-4.0 | 7.7-4.2 | 7.8-4.1 | 7.6-4.1 |
| Average COP at 50% Speed | 6.9 | 6.8 | 6.9 | 6.7 | 6.8 | 6.9 |
| Technical specifications | ||||||
| Advised pool volume(m³) | 15-30 | 20-45 | 35-65 | 40-75 | 50-90 | 60-110 |
| Operating air temperature(ºC) | -10ºC-43ºC | |||||
| Power supply | 220-240V/1Ph/50-60Hz | |||||
| Heat exchanger | Spiral titanium tube in PVC | |||||
| Refrigerant | R32 | |||||
| Casing | ABS | |||||
| Compressor | Twin-rotary | |||||
| Rated input power (kW) | 0.1-1.13 | 0.13-1.39 | 0.17-2.03 | 0.22-2.5 | 0.28-3.2 | 0.32-4.1 |
| Input power at 50% Speed(kW) | 0.4 | 0.5 | 0.7 | 0.9 | 1.2 | 1.3 |
| Rated input current(A) | 0.40-4.9 | 0.52-6.0 | 0.8-8.8 | 1.0-10.9 | 1.2-14.0 | 1.4-17.7 |
| Maximum input current(A) | 6.5 | 7.8 | 12 | 16.5 | 18.6 | 21 |
| Power cord(mm²) | 3*1.5 | 3*1.5 | 3*2.5 | 3*2.5 | 3*4.0 | 3*4.0 |
| Sound level at 1m dB(A) | 36.8-50.2 | 38.6-52.5 | 42.5-52.0 | 42.5-52.0 | 44.3-57.0 | 44.9-58.7 |
| Sound level by 50% speed 1m dB(A) | 42.5 | 45.8 | 47.5 | 47.5 | 48.6 | 48 |
| Sound level at 10m dB(A) | 17.9-30.2 | 19.6-31.4 | 22-32.5 | 24.2-35.4 | 24.3-36.2 | 25.9-37.6 |
| Advided water flow (m³/h) | 2-4 | 3-5 | 4-6 | 6-8 | 7-10 | 10-12 |
| Water connection(mm) | 50 | |||||
| Net dimension L*W*H(mm) | 891*370*665 | 891*370*665 | 891*370*665 | 981*370*665 | 981*440*765 | 981*440*765 |
| Packing Size(mm) | 936*385*695 | 936*385*695 | 936*385*695 | 1026*385*695 | 1026*455*800 | 1026*455*800 |
| Qty per 20’FT / 40’HQ (sets) | 102/216 | 102/216 | 102/216 | 90/198 | 50/165 | 50/165 |
Remarks:
The above data will be subject to change without further notice, please refer to the nameplate on the unit.
Advised pool volume applies to a private pool with an isothermal cover, from April to September
Detailed Photos
Company Profile
Types of Air Compressors
There are many types of Air Compressors available on the market. Learn which 1 is right for your needs and what makes 1 better than another. Find out more about Single-stage models, Oil-free models, and Low-noise models. This article will explain these types and help you decide which 1 you need. You can also learn about Air Compressors that have single-stage compressors. If you are looking for a high-quality compressor, this article will help you choose a unit.
Air Compressors
Air compressors work by forcing atmospheric air through an inlet valve. As the piston moves down, it pulls atmospheric air into the chamber. As the piston rises, it forces the compressed air out of the cylinder through an exhaust valve. One of the most common types of air compressor is the reciprocating type. Another type of compressor is a single-stage piston. These types of compressors compress air in 1 stroke – equivalent to the complete rotation of the piston’s crankshaft.
These devices change electrical or mechanical energy into pressurized air. When air is compressed, its volume decreases, increasing its pressure. Air compressors typically have a minimum pressure of 30 bars. The lower pressure band is the range of air pressure. Most compressors are controlled separately, but network controls can be used to interconnect multiple compressors. This type of controller will not work for all types of compressors. There are other types of air compressors that can communicate with each other.
Compressed air has multiple applications in all kinds of industries. In agriculture, it can power pneumatically powered material handling machines for irrigation and crop spraying. Dairy equipments also use compressed air. Compressors are also used in the pharmaceutical industry for mixing tanks, packaging, and conveyor systems. Portable air compressors, which can be powered by diesel fuel, are frequently used at remote drilling sites. Portable air compressors are also commonly used in oil and gas. They can be used to remotely control valves and install reactor rods.
Whether you use an air compressor for agricultural purposes or in a manufacturing setting, there are some features to consider when choosing an air compressor for your needs. A good compressor will have a safety device. It will automatically shut off the input air and output air once sufficient compressing has been achieved. These features will help your air compressor remain efficient and protect your equipment. The safety device is an important feature of any air compressor to increase its overall efficiency.
Vane air compressors are the most common type. They are generally smaller and less powerful than reciprocating piston compressors, so you can use 1 of these for applications that are under 100 horsepower. The vane air compressors have low compression ratios and high capacities, but they are generally limited to low-power applications. Vane compressors tend to run hot, and they typically have a low compression ratio. It is important to choose the correct oil viscosity for your compressor.
Single-stage models
When comparing single-stage air compressors, look for the term “stages.” Multi-stage compressors use 2 stages and can handle more capacity and pressure. One stage involves pressurizing air using a piston and a lower-pressure cylinder. This compressed air is then moved to a storage tank. Single-stage models tend to be more energy-efficient than their two-stage counterparts. But if you don’t need a high-pressure cylinder, a single-stage air compressor can be the best choice.
Although single-stage air compressors produce less power, they can produce enough air to power pneumatic tools and other pneumatic equipment. These single-stage units are most useful for smaller-scale home projects and DIY projects. For more industrial purposes, a dual-stage model is the best choice. But if you’re in a hurry, a single-stage unit may be sufficient. Ultimately, it depends on what you plan to do with the air compressor.
Single-stage air compressors feature a single cylinder, 1 piston stroke for each revolution of pressurized air. Single-stage compressors are typically smaller and more compact, making them a good choice for smaller work environments. Their cfm capacity (cubic feet per minute) is an important indicator of operating capacity. If you plan to use multiple pneumatic tools, you will probably need a higher cfm model. Similarly, the horsepower of single-stage compressors indicates its working capacity. One horsepower moves 550 pounds per foot per minute.
Multi-stage air compressors are generally more expensive and more energy-efficient than single-stage units, but they can offer higher air flow rates. While they may be more complex, they can lower general operating expenses. If you plan on using your air compressor for industrial or commercial use, a dual-stage model might be the best choice. However, if you’re planning to use the air compressor for mass production, a single-stage model may be the best choice.
Single-stage air compressors have the same piston size and number of inlets, while dual-stage models have a smaller first piston and a much longer second piston. Both have a cooling tube in between the 2 pistons to reduce the air temperature before the second round of compression. The single-stage model is typically small and portable, while the double-stage air compressor is stationary. These compressors can both be stationary and large.
Low-noise models
Despite its name, low-noise models of air compressors are not all the same. The noise level of a compressor can be affected by several factors, including the power source and proximity to the machine. Reciprocal compressors are generally louder than electric ones because of their many moving parts. By contrast, rotary-screw and scroll compressors have fewer moving parts and are quieter.
The noise level of a gas-powered air compressor can be extremely high, making it unsuitable for use indoors. To combat this problem, you can choose an electric model. The noise level of a compressor is primarily caused by motor friction. The cover of a piston is also a major factor in noise, as pistons with minimal covers will produce a lot of noise. Previously, oil was required for a quiet compressor. However, this has changed thanks to the medical industry’s demand for oil-free models.
The CZPT EC28M Quiet Air Compressor is another model that features quiet operation. This air compressor makes 59dB of noise. This level is low enough to allow you to carry on normal conversations while it cycles. In addition, this compressor has an industrial oil-free pump and a 2.8 Amp direct-drive induction motor. These 2 features make it a great choice for businesses.
Low-noise models of air compressors are available for the construction industry. However, these compressors are not necessarily low-quality, which is why you should consider the noise level of your air tool before purchasing one. The specialists at CZPT can recommend the low-noise models for your particular application and space. Noise can distract people who work near the air compressor. That is why many businesses now opt for these models.
Oil-free models
A number of oil-free models of air compressors are available, but what makes them special? Oil-free compressors don’t contain oil, so they’re lubricated by grease instead. They’re a good choice if you’re working with a small compressor and don’t want to risk damaging it. On the other hand, oil-free models do generate significant amounts of heat, which can damage the compressor. Higher pressure can grind the compressor against itself, or even warp it.
A few words of knowledge can help you choose the best oil-free air compressor for your needs. For example, a compressor’s horsepower is a measurement of how powerful the motor is. Higher horsepower means a higher PSI or ACFM. You can also use the ACFM to compare the two. Scroll technology is a modern air compression system that uses a stationary and mobile spiral. This reduces the volume of air in the compressor by directing it to the center.
Purchasing an oil-free air compressor doesn’t have to be a daunting task, though. A good distributor can advise you on what type of oil-free air compressor is right for you. This way, you can save money and enjoy peace of mind while using your air compressor. And, of course, the best way to get a great deal on an air compressor is to speak to a distributor who is knowledgeable about the products available.
An oil-free air compressor is a great option for businesses that are sensitive to the contamination of air. For example, in the pharmaceutical and food industry, a minuscule oil could spoil a product or even damage production equipment. Oil-free air compressors generally have lower maintenance costs than oil-flooded models because there are fewer moving parts. Because of this, oilless air compressors require fewer maintenance and may still need to be replaced occasionally.
A few advantages of an oil-free air compressor over an oil-lubricated 1 include lower noise levels. Oil-free air compressors tend to be less noisy and run more quietly than oil-injected ones, but you should still carefully weigh the pros and cons before making a decision. Also, consider how much you use your air compressor before choosing a model. The pros outweigh the cons. In the end, you’ll be glad you chose an oil-free air compressor.
