Product Description
newest energy-saving solar powered air conditioner,solar hybrid air conditioner
Product Details
When the power on, the compressor start working, it compress the refrigerant from low pressure to high pressure, low temperature to high temperature, then discharge to heat ex-changer of the solar collector,
In sunshine time ,the vacuum tube can absorb the sunshine to heat the water of the water tank, then the hot water will translate the heating to refrigerant by the ex-changer, then help the compressor heat the temperature and increase the pressure of the refrigerant again,so it just need use the small compressor driver the system running, just use the less power to cool or heat the room,to save more energy.
Hybrid solar air-conditioner is driven by electricity and with solar energy as an auxiliary power.The 2 kinds of energy work complementally in accordance with principles of fluid dynamics. It combines the absorption working system with compression system by using environmental-friendly media in cooling and heating on the basis of traditional air-conditioner technology to achieve energy-saving and environment protection.
Product Introduction
(9000BTU-24000BTU) for Wall Mounted range. Up to 48000btu for Cassette,Ducted, Floor standing,Floor ceiling series.
- on Grid Working with 50% solar energy
- Supreme high efficiency rating reach to 4.0
3.Fashion and Elegant Design, LED Display,Quiet Running
4.Vacuum thermal tube solar collector ,with easy installation and affordable cost
5. CZPT Compressor
6. Blue Coating Heat Ex-changer (Better heat transfer effect)
7.100% Copper Connection Pipes With Insulation
8.Environmental Friendly Gas R410A
Product Parameters
| Freon:R410 | ||||||
| Power Supply:220-240VAC, 1PH, 50/60Hz | ||||||
| Performance | ||||||
| Capacity | Cooling | Btu/h | 9000BTU | 11500BTU | 12000BTU | 18000BTU |
| W | 2600 | 3200 | 3500 | 5200 | ||
| Heating | Btu/h | 10000 | 12000 | 13000 | 20000 | |
| W | 2900 | 3500 | 3800 | 6000 | ||
| Noise | Indoor | dB(A) | ≤40 | ≤42 | ≤42 | ≤44 |
| Outdoor | dB(A) | ≤50 | ≤52 | ≤52 | ≤54 | |
| Air Circulation | m³/h | 500 | 520 | 550 | 800 | |
| Suitable Area | m² | 11~17 | 13~21 | 15~23 | 26~36 | |
| EER | W/W | 3.84 | 3.72 | 3.89 | 3.83 | |
| Btu/h/w | 12.42 | 12.69 | 13.27 | 13.07 | ||
| Power Consumption | ||||||
| Power Input | Cooling | W | 650~770 | 780~940 | 800~1571 | 1100~1300 |
| Heating | W | 650~780 | 780~950 | 800~1050 | 1150~1350 | |
| Rated Current | Cooling | A | 3.00~3.60 | 3.55~4.27 | 3.70~4.80 | 6.30~7.30 |
| Heating | A | 3.00~3.65 | 3.55~4.31 | 3.70~4.90 | 6.30~7.50 | |
| Vacuum Tube | Diameter*Length*Pcs | 47*520*10 | 47*520*10 | 47*520*10 | 47*620*11 | |
| Flat plate solar collector | WXDXH | 1000x550x90 | 1000x550x90 | 1000x550x90 | 1000x550x90 | |
| Dimensions | ||||||
| Indoor Unit | Net | mm | 775*265*210 | 775×265×210 | 775×265×210 | 985×300×220 |
| Shipping | mm | 840*325*265 | 840×325×265 | 840×325×265 | 1080×380×300 | |
| Outdoor Unit | Net | mm | 790*260*540 | 790*260*540 | 790*260*540 | 850*300*755 |
| Shipping | mm | 910*370*610 | 910*370*610 | 910*370*610 | 950*410*760 | |
| Water Tank | Shipping | mm | 910*400*330 | 910*400*330 | 910*400*330 | 980*400*370 |
| Vacuum Tube | Shipping | mm | ||||
| Flat plate solar collector | Shipping | mm | 1100x650x110 | 1100x650x110 | 1100x650x110 | 1100x650x110 |
| Weight | ||||||
| Indoor Unit | Net/Gross | kg | 9/10.5 | 10/11.5 | 10/11.5 | 16/17.5 |
| Outdoor Unit | Net/Gross | kg | 31/34 | 36/38 | 38/40 | 50/52 |
| Solar Collector | Net/Gross | kg | 13/15 | 13/15 | 13/15 | 16/17 |
| Loading Qty | in 20feet | sets | 75 | 75 | 75 | 55 |
| 40HQ | sets | 175 | 175 | 175 | 125 | |
| Freon:R410 | |||||
| Power Supply:220-240VAC, 1PH, 50/60Hz | |||||
| Performance | |||||
| Capacity | Cooling | Btu/h | 20000BTU | 24000BTU | 36000BTU |
| W | 6000 | 7200 | 10000 | ||
| Heating | Btu/h | 22000 | 27000 | 40000 | |
| W | 6600 | 7900 | 11000 | ||
| Noise | Indoor | dB(A) | ≤46 | ≤50 | ≤52 |
| Outdoor | dB(A) | ≤56 | ≤58 | ≤60 | |
| Air Circulation | m³/h | 850 | 1150 | 1350 | |
| Suitable Area | m² | 25~42 | 30~48 | 40~60 | |
| EER | W/W | 3.88 | 3.82 | 3.82 | |
| Btu/h/w | 13.24 | 13.03 | 13.03 | ||
| Power Consumption | |||||
| Power Input | Cooling | W | 1350~1560 | 1700~1900 | 2400~2640 |
| Heating | W | 1350~1590 | 1700~1950 | 2470~2650 | |
| Rated Current | Cooling | A | 6.30~7.30 | 8.00~8.90 | 10.91~11.95 |
| Heating | A | 6.30~7.50 | 8.00~8.90 | 11.23~12.05 | |
| Vacuum Tube | Diameter*Length*Pcs | 47*620*11 | 47*620*11 | 47*620*11 | |
| Flat plate solar collector | WXDXH | 1000x550x90 | 1000x550x90 | 900x500x80 | |
| Dimensions | |||||
| Indoor Unit | Net | mm | 985×300×220 | 985×300×220 | 1080×320×240 |
| Shipping | mm | 1080×380×300 | 1080×380×300 | 1150×420×320 | |
| Outdoor Unit | Net | mm | 850*300*755 | 850*300*755 | 865*310*710 |
| Shipping | mm | 950*410*760 | 950*410*760 | 1571*395*790 | |
| Water Tank | Shipping | mm | 980*400*370 | 980*400*370 | 980*400*370 |
| Vacuum Tube | Shipping | mm | |||
| Flat plate solar collector | Shipping | mm | 1100x650x110 | 1100x650x110 | 950x550x90mm |
| Weight | |||||
| Indoor Unit | Net/Gross | kg | 16/17.5 | 20/22 | 23/25 |
| Outdoor Unit | Net/Gross | kg | 50/52 | 55/58 | 65/70 |
| Solar Collector | Net/Gross | kg | 16/17 | 16/17 | 16/17 |
| Loading Qty | in 20feet | sets | 55 | 55 | 50 |
| 40HQ | sets | 125 | 125 | 115 | |
Product Details Show:
Solar air conditioner projects:
Product Processing
Product Packing
Hot Products
Why Choose Us?
1.Reply your inquiry in 24Hrs
2.Feedback of complaint in 24Hrs
3.OEM/ODM are accepted
4.Exclusive agents in local country are welcomed
5.Providing professional technical advice
6. Supergreen Tech Co.,Ltd, is a professional manufacturer of solar products such as Solar lights, Solar air conditioner, Solar refrigerators, Solar pest control lamp and so on.
With CE certification and several patent technology, making sure that we can provide all of our clients the best user friendly products!
FAQ:
Q1. Can I have a sample order for Solar air conditioner?
Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
Sample needs 7-20 days, mass production time needs 3-6 weeks.
Q3. Do you have any MOQ limit for air conditioner order?
Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
We usually ship by Sea shipping. It usually takes around 1-2 months
Q5. How to proceed an order for solar air conditioner ?
Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on air conditioner product?
Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
Yes,we offer 2-5 years warranty to our products.
Q8: How to deal with the faulty?
Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will repair them and resend them to you or provide the new parts to replace and ship with new containers. And we can discuss the solution including re-call according to real situation.
Welcome to work with us !
supergreensolar
Choose an Air Compressor for Your Business
There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
Positive displacement
Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are 2 different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
Single-stage
The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only 1 cylinder, which means 1 stroke is required to move air from 1 cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the 1 with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have 1 air intake, and two-stage air compressors have 2 air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
low noise
Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The 2 water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers 2 models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and 2 universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
