China supplier Industrial Dry Rotary Air Compressor Two Stage Pre-Owned CZPT Zr400VSD air compressor oil

Product Description

        CZPT is renowned for designing and manufacturing the most durable oil-free tooth compressors. The ZR/ZT rotary tooth compressor comes out of this strong tradition. Ideal for industries where high-quality oil-free air is key, the ZR/ZT offers the highest reliability and safety in combination with low energy costs.
       Oil-free air is used in all kinds of industries where air quality is paramount for the end product and production process. These applications include food and beverage processing, pharmaceutical manufacturing, chemical and petrochemical processing, fermentation, wastewater treatment, pneumatic conveying, non-woven textile manufacturing and many more.
       With the ZR/ZT, we provide an all-in-1 standard package incorporating the latest technology in a built-tolast design. To further optimize your ZR/ZT’s performance or to simply tailor it to your specific production environment, optional features are available.

100% oil-free air
Your activities in pharmaceutical production, food processing,
critical electronics or in a similarly exacting industry demand
the best air quality for a guaranteed end product and production
process. Designed with your specific applications in mind, our
rotary tooth compressors eliminate the risks of oil
contamination and the accompanying product spoilage, brand
damage and delays that represent extra costs. Preventing oil
from entering the compression process is a necessity for the
generation of consistent 100% oil-free air. Certified ISO 8573-1
CLASS 0 by the renowned TÜV institute, the ZR/ZT ensure the
safety of your application and at the same time allow you to
enjoy lower operating and maintenance costs.

Reduced energy costs
As energy accounts for more than 70% of a compressor’s
lifecycle costs (LCC), its importance is obvious. The most
cost-effective compressed air solution optimizes the pressure,
volume and air treatment equipment for each production
process. Our ZR/ZT compressors provide you with the ultimate
all-in-1 package to decrease your electricity bill by an average
of 35%. To help you save energy, regardless of whether you
require a low or high-capacity compressor, our VSD range has
been expanded with the ZT 22 VSD and the ZR/ZT 55 VSD.

Proven peace of mind
For 60 years, CZPT has been leading the industry in
oil-free compressed air technology, drawing on vast experience
and continuous technological innovations. You can rest assured
at all times: severe certification and testing procedures are
conducted to ensure air is supplied to the highest standards of
quality control. Backed by extensive know-how in the field of
developing the most reliable quality air solutions, we are the
only manufacturer that offers such a vast range of different
technologies to match your exact needs. This ensures that you
can always find the perfect solution for your specific application.

   

ZR 400-900VSD
             
Model FAD Noise Weight
l/s m³/min cfm dB(A) kg Ibs
ZR400VSD-8.6
max 1110 66.6 2352 77 8540 18827
min 370.6 22.2 785
ZR400VSD-10.4
max 971.7 58.3 2059 77 8540 18827
min 373.9 22.4 792
ZR500VSD-8.6
max 1316.7 79 2790 77 8540 18827
min 370.6 22.2 785
ZR500VSD-10.4
max 1153.3 69.2 2444 77 8540 18827
min 373.9 22.4 792

air-compressor

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China supplier Industrial Dry Rotary Air Compressor Two Stage Pre-Owned CZPT Zr400VSD   air compressor oilChina supplier Industrial Dry Rotary Air Compressor Two Stage Pre-Owned CZPT Zr400VSD   air compressor oil
editor by CX 2023-05-19