제품 설명
냉난방 겸용 DC 분리형 벽걸이 에어컨 가격 정보
제품 설명
1,9000BTU, 12000BTU, 18000BTU, 24000BTU, 30000BTU 분리형 에어컨
2. 방 등에 설치 가능한 벽걸이형 분리형 에어컨
3. DC 인버터 에어컨
4. 난방 펌프 벽걸이형 에어컨
5. 저렴한 가격과 전문적인 서비스를 제공하는 공장 직판
| 모델 번호 | VAC-09CHS/* | VAC-12CHS/* | VAC-18CHS/* | VAC-24CHS/* | VAC-30CHS/* | ||
| 유형 | 난방 펌프 | 난방 펌프 | 난방 펌프 | 난방 펌프 | 난방 펌프 | ||
| 제어 유형 | 원격 | 원격 | 원격 | 원격 | 원격 | ||
| 정격 냉각 용량 | Btu/h | 9,000 | 12,000 | 18,000 | 24000 | 30000 | |
| 정격 난방 용량 | Btu/h | 9,000 | 12,500 | 18,000 | 24500 | 30500 | |
| 수분 제거 | 리터/시간 | 0.8 | 1.0 | 1.5 | 2.0 | 2.5 | |
| 압력 | 높은(DP) | MPa | 2.8 | 2.8 | 2.8 | 2.8 | 2.8 |
| 낮음(SP) | MPa | 1.2 | 1.2 | 1.2 | 1.2 | 1.2 | |
| 냉방 시 실내 소음 수준 | 높은 | dB(A) | 36 | 42 | 45 | 49 | 52 |
| 의학 | dB(A) | 34 | 39 | 41 | 44 | 47 | |
| 낮은 | dB(A) | 31 | 36 | 38 | 40 | 43 | |
| 실외 소음 수준 | dB(A) | 50 | 52 | 54 | 58 | 64 | |
| 전기 데이터 | |||||||
| 전원 공급 장치 | 220~240V/50Hz | 220~240V/50Hz | 220~240V/50Hz | 220~240V/50Hz | 220~240V/50Hz | ||
| 전압 범위 | 다섯 | 198~264 | 198~264 | 198~264 | 198~264 | 198~264 | |
| 정격 전류 | 냉각 | 에이 | 4.3 | 5.6 | 8.5 | 11.3 | 14.9 |
| 난방 | 에이 | 4.1 | 5.7 | 8.2 | 11.5 | 15.0 | |
| 정격 입력 | 냉각 | W | 940 | 1240 | 1880 | 2480 | 3280 |
| 난방 | W | 910 | 1250 | 1800 | 2520 | 3310 | |
| 연간 에너지 소비량 | kWh (냉방) | 470 | 620 | 940 | 1240 | ||
| 최대 전류 | 냉각 | 에이 | 5.6 | 7.3 | 11.1 | 14.5 | 19.4 |
| 난방 | 에이 | 5.4 | 7.4 | 10.6 | 14.9 | 19.6 | |
| 최대 전력 입력 | 냉각 | W | 1220 | 1610 | 2440 | 3220 | 4260 |
| 난방 | W | 1180 | 1630 | 2340 | 3280 | 4300 | |
| 냉동 시스템 | |||||||
| 냉매/충전량 | 그램 | R22 | R22 | R22 | R22 | R22 | |
| 압축기 | 유형 | 로터리 | 로터리 | 로터리 | 로터리 | 로터리 | |
| 상표 | 레치 | 레치 | 레치 | GMCC | CRSS | ||
| 팬 시스템 | |||||||
| 실내 공기 순환(냉방/난방) | m3/h | 480 | 520 | 780 | 1000 | 1300 | |
| 실내용 선풍기 | 교차 흐름 | 교차 흐름 | 교차 흐름 | 교차 흐름 | 교차 흐름 | ||
| 실외용 선풍기 유형 | 추진자 | 추진자 | 추진자 | 추진자 | 추진자 | ||
| 사이 | |||||||
| 연결 파이프 | 가스 | mm | Φ9.52(3/8”) | Φ12(1/2”) | Φ12(1/2”) | Φ15.88(5/8”) | Φ15.88(5/8”) |
| 액체 | mm | Φ6(1/4”) | Φ6(1/4”) | Φ6(1/4”) | Φ9.52(3/8”) | Φ9.52(3/8”) | |
| 연결 배선 | 크기 x 코어 수 | 1.0×3; 0.75×2 | 1.0×3; 0.75×2 | 1.5×3; 0.75×2 | 0.75×4; 0.75×2 | 0.75×4 | |
| 기타 | |||||||
| 적합한 지역 | m2 | 9~16 | 15~23 | 20~35 | 27~45 | 50~70 | |
| 실측 치수(가로 x 세로 x 깊이) | 실내 | mm | 718×240×180 | 770×240×180 | 900x280x202 | 1033×313×202 | 1186×340×260 |
| 집 밖의 | mm | 600×232×500 | 700×256×552 | 760×256×552 | 820×300×605 | 900×805×360 | |
| 포장 치수(가로 x 세로 x 깊이) | 실내 | mm | 805×305×255 | 855×305×255 | 985x365x298 | 1103×400×300 | 1265×415×338 |
| 집 밖의 | mm | 745×353×550 | 803×361×600 | 863×361×590 | 950×426×640 | 1031×925×447 | |
| 순중량 | 실내 | kg | 6 | 8 | 10 | 14 | 17 |
| 집 밖의 | kg | 24 | 30 | 38 | 46 | 68 | |
| 총중량 | 실내 | kg | 8 | 10 | 13 | 17 | 21 |
| 실외(배관 없음) | kg | 27 | 34 | 41 | 50 | 74 | |
| 실외(배관 포함) | kg | 28 | 35 | 42 | 53 | 77 | |
| 적재 용량 | 20'/40'/40'HC | 132/277/310 | 103/235/275 | 95/198/222 | 70/150/166 | 98(40'HC) | |
회사 정보
베스타는 10년 이상 가전제품 시장에 종사해 왔습니다.
저희는 항상 고품질 제품의 설계 및 제조에 몰두하고 있습니다.
이 제품들은 효율성, 최소 소음, 에너지 절약을 통합적으로 갖추고 있습니다.
안전과 환경에 대한 완전한 존중을 바탕으로, 저희는 제품을 100만 개 이상 판매하고 있습니다.
프랑스, 영국, 러시아, 우크라이나, 인도, 알제리, 아랍에미리트 등 70개국 제품
최고의 전문적인 서비스를 제공합니다.
자주 묻는 질문
1. 왜 우리 공장과 제품을 선택해야 할까요?
저희는 제조업체이며 이 분야에서 15년 이상의 전문적인 경험을 보유하고 있습니다.
2. 우리는 고객을 위해 무엇을 할 것인가?
저희가 사전 점검을 해드릴 수 있는데, 이는 양측 모두에게 좋은 생각입니다.
저희는 견적서 및 기타 서류에 명시된 봉인된 샘플에 따라 반드시 제품을 발송하겠습니다.
또한, 저희는 24시간 온라인 기술 지원과 평생 사후 서비스를 제공합니다.
3. 귀사의 제품군은 무엇입니까? 에어컨, 냉장고, 레인지후드, 오븐, 세탁기, 식기세척기, 가스레인지, 전자레인지
4. 귀사의 경쟁 우위는 무엇입니까? a. 경쟁력 있는 가격
b. 우수한 사후 서비스
c. 빠른 배송 시간
d. 높은 품질 관리
e. 이 소재는 100% 재활용 소재로 만들어졌습니다.
f. 맞춤형 기술 요청, 크기, 디자인 및 포장을 환영합니다.
g. 설계, 생산, 품질 관리, 판매 및 배송에 이르기까지 원스톱 서비스를 제공합니다.
How to Choose the Right Air Compressor
An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
Electric motor
While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with 2 digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
Oil bath
Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.
Start/stop control
An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
Variable speed drive
A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between 40 percent and 80 percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.
