압축 공기 엔지니어링

China wholesaler Air Dryer / Combined Air Dryer / Air Cooled Refrigerated Combined Air Dryer Compressor for Sale air compressor for car

Product Description Air Dryer / Combined air dryer / Air cooled refrigerated combined air dryer compressor for sale  Detailed Photos (1) Air-cooled combined dryer Technological Process of the Combined Low Dew Point Compressed Air Dryer   Symbol Name Symbol Name 1 Refrigerant Compressor 15 Air Pressure Gauge 2 Oil Separator 16 Heat Exchanger 3 Condenser […]

4월 21, 2023엔지니어링 및 선정 가이드

제품 설명

Air Dryer / Combined air dryer / Air cooled refrigerated combined air dryer compressor for sale
 

상세 사진

(1) Air-cooled combined dryer

Technological Process of the Combined Low Dew Point Compressed Air Dryer

 

Symbol Name Symbol Name
1 Refrigerant Compressor 15 Air Pressure Gauge
2 Oil Separator 16 Heat Exchanger
3 Condenser 17 Pressure Relief Valve
4 Dryer Filter 18,19 Check Valve
5 Sight Lens 20,21 Check Valve(Heat Type)
6 Bulge Thermal Expansion Valve 22,23,24,25 Pneumatic Valve
7 Hot Gas Bypass Valve 26,29,30,33 Diffuser
8 Vaporizer 27,31 Air Pressure Gauge
9 Humidity Sensor 28,32 Adsorption Vessel
10 Evaporator 34,35,36,37 Pilot Solenoid Valve
11 Refrigerant
Low Pressure Gauge
38 Muffler
12 Refrigerant
Low Pressure Gauge
39 Flow Regulating Valve(Heatless Type)
13 High and Low Pressure Controller 40 Throttling Orifice Plate(Heat Type)
14 Gas Liquid Separator 41 Electical Heater(Heat Type)
       

 General Introduction: 
Commonly, there are 2 kinds of compressed air dryer: refrigerated compressed air dryer and regeneration adsorption one. The refrigerated compressed air dryer is quite energy-saving without any air loss, While it is limited by the dew point temperature. The regeneration adsorption compressed air dryer can reach a quiet low dew point, but it has the shortcoming of big air loss and high energy consumption.
The CZPT combined low dew point compressed air dryer takes the maximum advantages of the above 2 kinds of dryers through reasonable pipeline connection and capacity matching, which ensure its economic operation and high quality of low dew point finished air.
 Operating Principle:
Firstly, the hot and wet compressed air from the compressor is heat exchange with dried cold compressed air in the heat exchanger. Then it will be cooled down to about 2ºC by evaporator. Under this pressure dew point, the majority of vapor water in the compressed air is eliminated and discharged. After these processes, the low temperature air goes into the heat exchanger to cool the high wet compressed air, at the same time, itself temperature goes up in order to prevent the condensation of dew on the surface of pipelines. Last, low moisture compressed air dryer goes into the adsorption vessel to be further dried  in order to get the good dew point.
 

(2) Water-Cooled Combined Type Air Dryer

Working condition and technical data
Maximum inlet air temperature:45ºC
Ambient temperature range:5-50ºC
Pressure range:0.6-1.0Mpa
Pressure dew point:-20ºC ~ -40ºC
Regeneration gas consumption:3-5%
Cooling mode: water cooling (industrial circulating cooling water)
Cooling water pressure range: 0.2-0.4mpa
Maximum cooling water inlet temperature: 38 ºC
Intake oil content: ≤ 0.1ppm
Power supply: 6-12nm 3 / min: AC 220 V / 50 Hz
15nm3 / min and above: AC 380V / 220V / 50Hz
Cycle: T = 40 (min)
Refrigerant: R22 (R407C / R134a optional)
Design condition: inlet temperature: 38 ºC
Ambient temperature: 38 ºC
Working pressure: 0.7MPa
Cooling water inlet temperature: 32 ºC
Pressure loss: ≤ 5% of design pressure
Note: the water-cooled equipment above 80 cubic CZPT are split bare machines. Other special requirements are welcome to customize.

Product features

  1. Low dew point:The combined low dew point dryer can reach very low pressure dew point, which can reach below – 40 ºC in general, and – 70 ºC at least according to different user requirements;
  2. Low energy consumption: the regeneration gas consumption of combined low dew point dryer is only 3% – 5%, which greatly saves the compressed air consumption;
  3. It can provide compressed air with different dew points for different air consumption points;
  4. All the operation switches and display instruments of the combined low dew point compressed air dryer are concentrated on the panel of the box plate. The refrigeration type compressed air dryer and the adsorption regeneration compressed air dryer can operate independently or simultaneously with cold and suction according to the customer’s needs;
  5. The gas-liquid separator adopts the patented three-stage separation mode: direct collision separation + low-speed centrifugal separation + stainless steel wire mesh demisting separation. 99.9% of liquid water is separated from the cooled compressed air. The second evaporation of textile moisture can ensure the low dew point quality of finished gas.
  6. High quality switching valve, stable and reliable, can ensure the integrity of the working process and prolong the working life of components.
  7. The refrigeration compressor adopts CZPT of Denmark, CZPT of ZheJiang , CZPT of Japan, CZPT of Germany, CZPT of Germany, CZPT of France and other companies of fully closed or semi closed refrigeration compressor, which has stable operation, low noise, high cop, reliable performance and long power saving life;

 

제품 매개변수

(1) Air-Cooled Combined Type Air Dryer specification
 

모델     
  목

공기 용량
(Nm3/min)
Desiccant weight(kg) Air connector dia Refrigerant power
(HP)
공기 흐름
(Nm3/h)
Fan power(W) 전압
(V)
Dryer Net Weight
(kg)
Length(mm) Wideth(mm) Height(mm)
SDZF-1 1.2 25 G1″ 1/2 745 1×50 220 400 1080 850 1460
SDZF-2 2.5 40 G1″ 1/2 745 1×50 220 440 1100 900 2050
SDZF-3 3.6 60 G1″ 3/4 1330 1×100 220 460 1200 1000 1808
SDZF-4.5 5 85 G1 1/2″ 1 2670 1×135 220 660 1290 1030 2263
SDZF-6 6.8 105 G1 1/2″ 1.5 4500 1×230 220 775 1500 1105 1931
SDZF-8 8.5 150 G2″ 2 5340 2×135 220 970 1500 1240 2016
SDZF-10 10.9 185 G2″ 2.5 5340 2×135 220 1120 1500 1240 2316
SDZF-12 12.8 185 G2″ 2.5 5340 2×135 220 1120 1500 1240 2316
SDZF-15 16 310 디나65 3 7600 2×190 380/220 1700 1960 1450 2342
SDZF-20 22 395 디나65 4 7600 2×190 380/220 1800 1980 1600 2408
SDZF-25 26.8 492 디나80 5 9000 2×230 380/220 2100 2270 1700 2460
SDZF-30 32 600 디나80 6 9000 2×230 380/220 2300 2420 1780 2506
SDZF-40 43.5 725 디나100 7 12500 2×420 380/220 2700 2100 2340 2673
SDZF-50 53 855 디나100 10 13500 3×230 380/220 2900 2100 2390 2687
SDZF-60 67 1005 디나125 12 18750 3×420 380/220 3350 2250 2600 2814
SDZF-80 90 1335 디나125 13.3 25000 4×420 380/220 4200 2640 2600 2866

 

 

 

Note:Design conditions: working pressure: 7bar, inlet temperature: 38ºC, pressure dew point: -20ºC

(2) Water-Cooled Combined Type Air Dryer
 

Product specifications

모델 공기 용량
(Nm3/min)
Weight of desiccant(kg) Air nozzle diameter Diameter of cooling water pipe Cooling power
(HP)
Cooling water flow
(Nm3/h)
전압
(V)
Equipment weight
(kg)
길이(mm) W(mm) 흠)
SDZW-6 6.8 105 G1 1/2″ R1″ 1.5 1.2 220 760 1500 1160 1940
SDZW-8 8.5 150 G2″ R1″ 2 1.2 220 960 1500 1100 2016
SDZW-10 10.9 185 G2″ R1″ 2.5 1.6 220 1120 1500 1240 2316
SDZW-12 12.8 185 G2″ R1″ 2.5 1.8 220 1150 1500 1240 2316
SDZW-15 16 275 디나65 R1″ 3 2 380/220 1660 1960 1450 2196
SDZW-20 22 395 디나65 R1 1/2″ 4 3 380/220 1740 1970 1600 2475
SDZW-25 26.8 495 디나80 R1 1/2″ 5 3.6 380/220 2075 2030 1630 2505
SDZW-30 32 605 디나80 R1 1/2″ 6 4.6 380/220 2200 2240 1840 2519
SDZW-40 43.5 725 디나100 R1 1/2″ 7 5.6 380/220 2784 2360 1900 2637
SDZW-50 53 860 디나100 R1 1/2″ 10 7.2 380/220 3144 2400 2000 2638
SDZW-60 67 1005 디나125 R1 1/2″ 12 9.2 380/220 3361 2540 2100 2719
SDZW-80 90 1335 디나125 R1 1/2″ 13.3 10.8 380/220 4500 2640 2450 2818
SDZW-100 110 2155 디나150 R1 1/2″ 20 12.4 380/220 6550 2680 2670 2985
SDZW-120 130 2650 디나150 R2″ 25 14.6 380/220 7810 2820 2800 3041
SDZW-150 160 3205 디나200 R2″ 25 16.2 380/220 8500 3290 3130 3190
SDZW-200 210 3825 디나200 R2 1/2″ 40 18.6 380/220 9600 3350 3375 3309
SDZW-250 260 5260 DN250 R2 1/2″ 60 24.4 380/220 Detailed parameters and consultation with manufacturers
SDZW-300 315 6160 DN250 R3″ 70 30.5 380/220 Detailed parameters and consultation with manufacturers

 

Optional Accessories

  • Micro heat type
  • Dew point display
  • Dew point energy saving control
  • Special voltage
  • Environmental refrigerant
  • – 70 ºC dew point
  • Not limited to this

회사 소개

 

인증

 

포장 및 배송

 

자주 묻는 질문

 

판매 후 서비스: Ok
보증: 1년
Flow: Cross Flow
Material Status: Bulk
Drying Medium: Air
Structure: All Kinds
샘플:
US$ 1000/Set
1세트(최소 주문 수량)

|
샘플 요청

맞춤 설정:
사용 가능

|

공기 압축기

공기 압축기의 종류

There are many types of Air Compressors available on the market. Learn which one is right for your needs and what makes one better than another. Find out more about Single-stage models, Oil-free models, and Low-noise models. This article will explain these types and help you decide which one you need. You can also learn about Air Compressors that have single-stage compressors. If you are looking for a high-quality compressor, this article will help you choose a unit.

공기 압축기

Air compressors work by forcing atmospheric air through an inlet valve. As the piston moves down, it pulls atmospheric air into the chamber. As the piston rises, it forces the compressed air out of the cylinder through an exhaust valve. One of the most common types of air compressor is the reciprocating type. Another type of compressor is a single-stage piston. These types of compressors compress air in one stroke – equivalent to the complete rotation of the piston’s crankshaft.
이 장치들은 전기 에너지나 기계 에너지를 압축된 공기로 변환합니다. 공기가 압축되면 부피가 줄어들고 압력이 증가합니다. 공기 압축기는 일반적으로 최소 30bar의 압력을 유지합니다. 이 압력 범위가 공기 압력의 하한선입니다. 대부분의 압축기는 개별적으로 제어되지만, 네트워크 제어를 사용하여 여러 압축기를 상호 연결할 수도 있습니다. 하지만 이러한 유형의 컨트롤러가 모든 종류의 압축기에 호환되는 것은 아닙니다. 서로 통신할 수 있는 다른 유형의 공기 압축기도 있습니다.
압축 공기는 모든 산업 분야에서 다양한 용도로 사용됩니다. 농업에서는 관개 및 작물 살포를 위한 공압식 자재 이송 기계에 동력을 공급하는 데 사용됩니다. 낙농 장비에도 압축 공기가 사용됩니다. 제약 산업에서는 혼합 탱크, 포장 및 컨베이어 시스템에 압축기가 사용됩니다. 디젤 연료로 작동하는 휴대용 공기 압축기는 외딴 시추 현장에서 자주 사용됩니다. 휴대용 공기 압축기는 석유 및 가스 산업에서도 흔히 사용됩니다. 밸브를 원격으로 제어하고 반응기 봉을 설치하는 데 사용될 수 있습니다.
농업용이든 제조 현장이든, 공기 압축기를 사용할 때는 몇 가지 고려 사항이 있습니다. 좋은 압축기는 안전 장치를 갖추고 있어야 합니다. 충분한 압축이 이루어지면 자동으로 공기 유입과 배출을 차단하는 기능입니다. 이러한 기능은 공기 압축기의 효율성을 유지하고 장비를 보호하는 데 도움이 됩니다. 안전 장치는 공기 압축기의 전반적인 효율성을 높이는 데 중요한 요소입니다.
Vane air compressors are the most common type. They are generally smaller and less powerful than reciprocating piston compressors, so you can use one of these for applications that are under 100 horsepower. The vane air compressors have low compression ratios and high capacities, but they are generally limited to low-power applications. Vane compressors tend to run hot, and they typically have a low compression ratio. It is important to choose the correct oil viscosity for your compressor.
공기 압축기

단일 단계 모델

When comparing single-stage air compressors, look for the term “stages.” Multi-stage compressors use two stages and can handle more capacity and pressure. One stage involves pressurizing air using a piston and a lower-pressure cylinder. This compressed air is then moved to a storage tank. Single-stage models tend to be more energy-efficient than their two-stage counterparts. But if you don’t need a high-pressure cylinder, a single-stage air compressor can be the best choice.
단일 단계 공기 압축기는 출력은 다소 낮지만, 공압 공구 및 기타 공압 장비를 작동시키기에 충분한 공기를 생산할 수 있습니다. 이러한 단일 단계 장치는 소규모 가정용 프로젝트나 DIY 프로젝트에 가장 적합합니다. 산업용으로는 이중 단계 모델이 최적의 선택입니다. 하지만 급하게 필요하다면 단일 단계 장치로도 충분할 수 있습니다. 궁극적으로 어떤 용도로 공기 압축기를 사용할지에 따라 선택이 달라집니다.
Single-stage air compressors feature a single cylinder, one piston stroke for each revolution of pressurized air. Single-stage compressors are typically smaller and more compact, making them a good choice for smaller work environments. Their cfm capacity (cubic feet per minute) is an important indicator of operating capacity. If you plan to use multiple pneumatic tools, you will probably need a higher cfm model. Similarly, the horsepower of single-stage compressors indicates its working capacity. One horsepower moves 550 pounds per foot per minute.
다단식 공기 압축기는 일반적으로 단일식 압축기보다 가격이 비싸고 에너지 효율이 높지만, 더 높은 공기 유량을 제공할 수 있습니다. 구조가 더 복잡할 수 있지만, 전반적인 운영 비용을 절감할 수 있습니다. 산업용 또는 상업용으로 공기 압축기를 사용할 계획이라면 이중단식 모델이 최적의 선택일 수 있습니다. 하지만 대량 생산용으로 사용할 경우에는 단일단식 모델이 더 적합할 수 있습니다.
Single-stage air compressors have the same piston size and number of inlets, while dual-stage models have a smaller first piston and a much longer second piston. Both have a cooling tube in between the two pistons to reduce the air temperature before the second round of compression. The single-stage model is typically small and portable, while the double-stage air compressor is stationary. These compressors can both be stationary and large.

저소음 모델

이름과 달리 저소음 공기 압축기라고 해서 모두 소음 수준이 같은 것은 아닙니다. 압축기의 소음 수준은 전원 공급 방식과 기계와의 거리 등 여러 요인에 영향을 받습니다. 왕복동식 압축기는 움직이는 부품이 많아 일반적으로 전기식 압축기보다 소음이 큽니다. 반면 로터리 스크류식 및 스크롤식 압축기는 움직이는 부품이 적어 소음이 적습니다.
가스식 공기 압축기는 소음이 매우 커서 실내 사용에 적합하지 않습니다. 이러한 문제를 해결하기 위해 전기식 모델을 선택할 수 있습니다. 압축기 소음은 주로 모터 마찰로 인해 발생합니다. 피스톤 커버 또한 소음에 큰 영향을 미치는데, 커버가 거의 없는 피스톤은 소음이 많이 발생합니다. 과거에는 조용한 압축기를 위해 오일이 필요했지만, 의료 산업의 무오일 모델 수요 증가로 인해 이제는 오일이 필요 없는 모델도 많아졌습니다.
The CZPT EC28M Quiet Air Compressor is another model that features quiet operation. This air compressor makes 59dB of noise. This level is low enough to allow you to carry on normal conversations while it cycles. In addition, this compressor has an industrial oil-free pump and a 2.8 Amp direct-drive induction motor. These two features make it a great choice for businesses.
건설 현장용 저소음 공기압축기가 시중에 나와 있습니다. 하지만 저소음 공기압축기가 반드시 품질이 낮은 것은 아니므로 구매 전에 소음 수준을 고려해야 합니다. CZPT의 전문가들은 고객의 특정 용도와 작업 공간에 맞는 저소음 모델을 추천해 드립니다. 소음은 공기압축기 근처에서 작업하는 사람들의 집중력을 방해할 수 있습니다. 이러한 이유로 많은 기업들이 저소음 모델을 선택하고 있습니다.
공기 압축기

오일프리 모델

시중에는 다양한 오일 프리 공기 압축기 모델이 있지만, 오일 프리 압축기만의 특징은 무엇일까요? 오일 프리 압축기는 오일을 사용하지 않고 그리스로 윤활합니다. 소형 압축기를 사용하거나 손상 위험을 최소화하고 싶을 때 좋은 선택입니다. 하지만 오일 프리 모델은 상당한 열을 발생시키는데, 이로 인해 압축기가 손상될 수 있습니다. 높은 압력은 압축기 내부를 마모시키거나 심지어 변형시킬 수도 있습니다.
몇 가지 정보를 알아두면 필요에 맞는 최적의 오일 프리 공기 압축기를 선택하는 데 도움이 될 수 있습니다. 예를 들어, 압축기의 마력은 모터의 출력을 나타내는 척도입니다. 마력이 높을수록 PSI 또는 ACFM이 높아집니다. ACFM을 사용하여 두 값을 비교할 수도 있습니다. 스크롤 기술은 고정된 나선형과 움직이는 나선형을 사용하는 최신 공기 압축 시스템입니다. 이 기술은 공기를 중앙으로 집중시켜 압축기 내부의 공기량을 줄입니다.
오일 프리 공기 압축기를 구매하는 것이 꼭 어려운 일일 필요는 없습니다. 경험이 풍부한 판매점에서는 어떤 종류의 오일 프리 공기 압축기가 자신에게 적합한지 조언해 줄 수 있습니다. 이렇게 하면 비용을 절감하고 안심하고 공기 압축기를 사용할 수 있습니다. 물론, 공기 압축기를 저렴하게 구매하는 가장 좋은 방법은 제품에 대해 잘 아는 판매점과 상담하는 것입니다.
오일 프리 공기 압축기는 공기 오염에 민감한 사업장에 탁월한 선택입니다. 예를 들어, 제약 및 식품 산업에서는 미량의 오일이라도 제품을 변질시키거나 생산 설비를 손상시킬 수 있습니다. 오일 프리 공기 압축기는 일반적으로 오일 윤활식 모델보다 움직이는 부품이 적어 유지 보수 비용이 저렴합니다. 따라서 오일 프리 공기 압축기는 유지 보수 횟수가 적지만, 주기적인 교체가 필요할 수도 있습니다.
A few advantages of an oil-free air compressor over an oil-lubricated one include lower noise levels. Oil-free air compressors tend to be less noisy and run more quietly than oil-injected ones, but you should still carefully weigh the pros and cons before making a decision. Also, consider how much you use your air compressor before choosing a model. The pros outweigh the cons. In the end, you’ll be glad you chose an oil-free air compressor.

China wholesaler Air Dryer / Combined Air Dryer / Air Cooled Refrigerated Combined Air Dryer Compressor for Sale   air compressor for carChina wholesaler Air Dryer / Combined Air Dryer / Air Cooled Refrigerated Combined Air Dryer Compressor for Sale   air compressor for car
editor by CX 2023-04-22