Productbeschrijving
Air Dryer / Combined air dryer / Air cooled refrigerated combined air dryer compressor for sale
Gedetailleerde foto's
(1) Air-cooled combined dryer
Technological Process of the Combined Low Dew Point Compressed Air Dryer
| Symbol | Name | Symbol | Name |
| 1 | Refrigerant Compressor | 15 | Air Pressure Gauge |
| 2 | Oil Separator | 16 | Heat Exchanger |
| 3 | Condenser | 17 | Pressure Relief Valve |
| 4 | Dryer Filter | 18,19 | Check Valve |
| 5 | Sight Lens | 20,21 | Check Valve(Heat Type) |
| 6 | Bulge Thermal Expansion Valve | 22,23,24,25 | Pneumatic Valve |
| 7 | Hot Gas Bypass Valve | 26,29,30,33 | Diffuser |
| 8 | Vaporizer | 27,31 | Air Pressure Gauge |
| 9 | Humidity Sensor | 28,32 | Adsorption Vessel |
| 10 | Evaporator | 34,35,36,37 | Pilot Solenoid Valve |
| 11 | Refrigerant Low Pressure Gauge |
38 | Muffler |
| 12 | Refrigerant Low Pressure Gauge |
39 | Flow Regulating Valve(Heatless Type) |
| 13 | High and Low Pressure Controller | 40 | Throttling Orifice Plate(Heat Type) |
| 14 | Gas Liquid Separator | 41 | Electical Heater(Heat Type) |
General Introduction:
Commonly, there are 2 kinds of compressed air dryer: refrigerated compressed air dryer and regeneration adsorption one. The refrigerated compressed air dryer is quite energy-saving without any air loss, While it is limited by the dew point temperature. The regeneration adsorption compressed air dryer can reach a quiet low dew point, but it has the shortcoming of big air loss and high energy consumption.
The CZPT combined low dew point compressed air dryer takes the maximum advantages of the above 2 kinds of dryers through reasonable pipeline connection and capacity matching, which ensure its economic operation and high quality of low dew point finished air.
Operating Principle:
Firstly, the hot and wet compressed air from the compressor is heat exchange with dried cold compressed air in the heat exchanger. Then it will be cooled down to about 2ºC by evaporator. Under this pressure dew point, the majority of vapor water in the compressed air is eliminated and discharged. After these processes, the low temperature air goes into the heat exchanger to cool the high wet compressed air, at the same time, itself temperature goes up in order to prevent the condensation of dew on the surface of pipelines. Last, low moisture compressed air dryer goes into the adsorption vessel to be further dried in order to get the good dew point.
(2) Water-Cooled Combined Type Air Dryer
Working condition and technical data
Maximum inlet air temperature:45ºC
Ambient temperature range:5-50ºC
Pressure range:0.6-1.0Mpa
Pressure dew point:-20ºC ~ -40ºC
Regeneration gas consumption:3-5%
Cooling mode: water cooling (industrial circulating cooling water)
Cooling water pressure range: 0.2-0.4mpa
Maximum cooling water inlet temperature: 38 ºC
Intake oil content: ≤ 0.1ppm
Power supply: 6-12nm 3 / min: AC 220 V / 50 Hz
15nm3 / min and above: AC 380V / 220V / 50Hz
Cycle: T = 40 (min)
Refrigerant: R22 (R407C / R134a optional)
Design condition: inlet temperature: 38 ºC
Ambient temperature: 38 ºC
Working pressure: 0.7MPa
Cooling water inlet temperature: 32 ºC
Pressure loss: ≤ 5% of design pressure
Note: the water-cooled equipment above 80 cubic CZPT are split bare machines. Other special requirements are welcome to customize.
Product features
- Low dew point:The combined low dew point dryer can reach very low pressure dew point, which can reach below – 40 ºC in general, and – 70 ºC at least according to different user requirements;
- Low energy consumption: the regeneration gas consumption of combined low dew point dryer is only 3% – 5%, which greatly saves the compressed air consumption;
- It can provide compressed air with different dew points for different air consumption points;
- All the operation switches and display instruments of the combined low dew point compressed air dryer are concentrated on the panel of the box plate. The refrigeration type compressed air dryer and the adsorption regeneration compressed air dryer can operate independently or simultaneously with cold and suction according to the customer’s needs;
- The gas-liquid separator adopts the patented three-stage separation mode: direct collision separation + low-speed centrifugal separation + stainless steel wire mesh demisting separation. 99.9% of liquid water is separated from the cooled compressed air. The second evaporation of textile moisture can ensure the low dew point quality of finished gas.
- High quality switching valve, stable and reliable, can ensure the integrity of the working process and prolong the working life of components.
- The refrigeration compressor adopts CZPT of Denmark, CZPT of ZheJiang , CZPT of Japan, CZPT of Germany, CZPT of Germany, CZPT of France and other companies of fully closed or semi closed refrigeration compressor, which has stable operation, low noise, high cop, reliable performance and long power saving life;
Productparameters
(1) Air-Cooled Combined Type Air Dryer specification
|
Model |
Luchtcapaciteit (Nm3/min) |
Desiccant weight(kg) | Air connector dia | Refrigerant power (HP) |
Luchtstroom (Nm3/h) |
Fan power(W) | Spanning (V) |
Dryer Net Weight (kg) |
Length(mm) | Wideth(mm) | Height(mm) |
| SDZF-1 | 1.2 | 25 | G1″ | 1/2 | 745 | 1×50 | 220 | 400 | 1080 | 850 | 1460 |
| SDZF-2 | 2.5 | 40 | G1″ | 1/2 | 745 | 1×50 | 220 | 440 | 1100 | 900 | 2050 |
| SDZF-3 | 3.6 | 60 | G1″ | 3/4 | 1330 | 1×100 | 220 | 460 | 1200 | 1000 | 1808 |
| SDZF-4.5 | 5 | 85 | G1 1/2″ | 1 | 2670 | 1×135 | 220 | 660 | 1290 | 1030 | 2263 |
| SDZF-6 | 6.8 | 105 | G1 1/2″ | 1.5 | 4500 | 1×230 | 220 | 775 | 1500 | 1105 | 1931 |
| SDZF-8 | 8.5 | 150 | G2″ | 2 | 5340 | 2×135 | 220 | 970 | 1500 | 1240 | 2016 |
| SDZF-10 | 10.9 | 185 | G2″ | 2.5 | 5340 | 2×135 | 220 | 1120 | 1500 | 1240 | 2316 |
| SDZF-12 | 12.8 | 185 | G2″ | 2.5 | 5340 | 2×135 | 220 | 1120 | 1500 | 1240 | 2316 |
| SDZF-15 | 16 | 310 | DN65 | 3 | 7600 | 2×190 | 380/220 | 1700 | 1960 | 1450 | 2342 |
| SDZF-20 | 22 | 395 | DN65 | 4 | 7600 | 2×190 | 380/220 | 1800 | 1980 | 1600 | 2408 |
| SDZF-25 | 26.8 | 492 | DN80 | 5 | 9000 | 2×230 | 380/220 | 2100 | 2270 | 1700 | 2460 |
| SDZF-30 | 32 | 600 | DN80 | 6 | 9000 | 2×230 | 380/220 | 2300 | 2420 | 1780 | 2506 |
| SDZF-40 | 43.5 | 725 | DN100 | 7 | 12500 | 2×420 | 380/220 | 2700 | 2100 | 2340 | 2673 |
| SDZF-50 | 53 | 855 | DN100 | 10 | 13500 | 3×230 | 380/220 | 2900 | 2100 | 2390 | 2687 |
| SDZF-60 | 67 | 1005 | DN125 | 12 | 18750 | 3×420 | 380/220 | 3350 | 2250 | 2600 | 2814 |
| SDZF-80 | 90 | 1335 | DN125 | 13.3 | 25000 | 4×420 | 380/220 | 4200 | 2640 | 2600 | 2866 |
Note:Design conditions: working pressure: 7bar, inlet temperature: 38ºC, pressure dew point: -20ºC
(2) Water-Cooled Combined Type Air Dryer
Product specifications
| model | Luchtcapaciteit (Nm3/min) |
Weight of desiccant(kg) | Air nozzle diameter | Diameter of cooling water pipe | Cooling power (HP) |
Cooling water flow (Nm3/h) |
Spanning (V) |
Equipment weight (kg) |
L(mm) | W(mm) | H(mm) |
| SDZW-6 | 6.8 | 105 | G1 1/2″ | R1″ | 1.5 | 1.2 | 220 | 760 | 1500 | 1160 | 1940 |
| SDZW-8 | 8.5 | 150 | G2″ | R1″ | 2 | 1.2 | 220 | 960 | 1500 | 1100 | 2016 |
| SDZW-10 | 10.9 | 185 | G2″ | R1″ | 2.5 | 1.6 | 220 | 1120 | 1500 | 1240 | 2316 |
| SDZW-12 | 12.8 | 185 | G2″ | R1″ | 2.5 | 1.8 | 220 | 1150 | 1500 | 1240 | 2316 |
| SDZW-15 | 16 | 275 | DN65 | R1″ | 3 | 2 | 380/220 | 1660 | 1960 | 1450 | 2196 |
| SDZW-20 | 22 | 395 | DN65 | R1 1/2″ | 4 | 3 | 380/220 | 1740 | 1970 | 1600 | 2475 |
| SDZW-25 | 26.8 | 495 | DN80 | R1 1/2″ | 5 | 3.6 | 380/220 | 2075 | 2030 | 1630 | 2505 |
| SDZW-30 | 32 | 605 | DN80 | R1 1/2″ | 6 | 4.6 | 380/220 | 2200 | 2240 | 1840 | 2519 |
| SDZW-40 | 43.5 | 725 | DN100 | R1 1/2″ | 7 | 5.6 | 380/220 | 2784 | 2360 | 1900 | 2637 |
| SDZW-50 | 53 | 860 | DN100 | R1 1/2″ | 10 | 7.2 | 380/220 | 3144 | 2400 | 2000 | 2638 |
| SDZW-60 | 67 | 1005 | DN125 | R1 1/2″ | 12 | 9.2 | 380/220 | 3361 | 2540 | 2100 | 2719 |
| SDZW-80 | 90 | 1335 | DN125 | R1 1/2″ | 13.3 | 10.8 | 380/220 | 4500 | 2640 | 2450 | 2818 |
| SDZW-100 | 110 | 2155 | DN150 | R1 1/2″ | 20 | 12.4 | 380/220 | 6550 | 2680 | 2670 | 2985 |
| SDZW-120 | 130 | 2650 | DN150 | R2″ | 25 | 14.6 | 380/220 | 7810 | 2820 | 2800 | 3041 |
| SDZW-150 | 160 | 3205 | DN200 | R2″ | 25 | 16.2 | 380/220 | 8500 | 3290 | 3130 | 3190 |
| SDZW-200 | 210 | 3825 | DN200 | R2 1/2″ | 40 | 18.6 | 380/220 | 9600 | 3350 | 3375 | 3309 |
| SDZW-250 | 260 | 5260 | DN250 | R2 1/2″ | 60 | 24.4 | 380/220 | Detailed parameters and consultation with manufacturers | |||
| SDZW-300 | 315 | 6160 | DN250 | R3″ | 70 | 30.5 | 380/220 | Detailed parameters and consultation with manufacturers | |||
Optional Accessories
- Micro heat type
- Dew point display
- Dew point energy saving control
- Special voltage
- Environmental refrigerant
- – 70 ºC dew point
- Not limited to this
Bedrijfsprofiel
Certificeringen
Verpakking en verzending
Veelgestelde vragen
| Klantenservice na aankoop: | Ok |
|---|---|
| Garantie: | 1 jaar |
| Flow: | Cross Flow |
| Material Status: | Bulk |
| Drying Medium: | Air |
| Structure: | All Kinds |
| Voorbeelden: |
US$ 1000/Set
1 set (minimale bestelling) | |
|---|
| Aanpassing: |
Beschikbaar
|
|
|---|

Soorten luchtcompressoren
There are many types of Air Compressors available on the market. Learn which one is right for your needs and what makes one better than another. Find out more about Single-stage models, Oil-free models, and Low-noise models. This article will explain these types and help you decide which one you need. You can also learn about Air Compressors that have single-stage compressors. If you are looking for a high-quality compressor, this article will help you choose a unit.
Luchtcompressoren
Air compressors work by forcing atmospheric air through an inlet valve. As the piston moves down, it pulls atmospheric air into the chamber. As the piston rises, it forces the compressed air out of the cylinder through an exhaust valve. One of the most common types of air compressor is the reciprocating type. Another type of compressor is a single-stage piston. These types of compressors compress air in one stroke – equivalent to the complete rotation of the piston’s crankshaft.
Deze apparaten zetten elektrische of mechanische energie om in perslucht. Wanneer lucht wordt samengedrukt, neemt het volume af en de druk toe. Luchtcompressoren hebben doorgaans een minimale druk van 30 bar. De ondergrens van de druk is het bereik van de luchtdruk. De meeste compressoren worden afzonderlijk aangestuurd, maar netwerkbesturing kan worden gebruikt om meerdere compressoren met elkaar te verbinden. Dit type besturing werkt echter niet voor alle typen compressoren. Er zijn ook andere typen luchtcompressoren die met elkaar kunnen communiceren.
Perslucht heeft talloze toepassingen in allerlei industrieën. In de landbouw kan het bijvoorbeeld pneumatisch aangedreven machines voor materiaalbehandeling aandrijven, zoals voor irrigatie en gewasbespuiting. Ook zuivelapparatuur maakt gebruik van perslucht. Compressoren worden ook in de farmaceutische industrie gebruikt voor mengtanks, verpakkingen en transportsystemen. Draagbare luchtcompressoren, die op diesel kunnen werken, worden vaak gebruikt op afgelegen boorlocaties. Draagbare luchtcompressoren worden ook veel gebruikt in de olie- en gasindustrie. Daar kunnen ze bijvoorbeeld worden ingezet om kleppen op afstand te bedienen en reactorstaven te installeren.
Of u nu een luchtcompressor gebruikt voor agrarische doeleinden of in een productieomgeving, er zijn een aantal kenmerken waarmee u rekening moet houden bij de keuze van een luchtcompressor die aan uw behoeften voldoet. Een goede compressor heeft een veiligheidsvoorziening. Deze schakelt automatisch de in- en uitgaande lucht uit zodra er voldoende compressie is bereikt. Deze functies dragen bij aan de efficiëntie van uw luchtcompressor en beschermen uw apparatuur. De veiligheidsvoorziening is een belangrijk onderdeel van elke luchtcompressor om de algehele efficiëntie te verhogen.
Vane air compressors are the most common type. They are generally smaller and less powerful than reciprocating piston compressors, so you can use one of these for applications that are under 100 horsepower. The vane air compressors have low compression ratios and high capacities, but they are generally limited to low-power applications. Vane compressors tend to run hot, and they typically have a low compression ratio. It is important to choose the correct oil viscosity for your compressor.
Eentrapsmodellen
When comparing single-stage air compressors, look for the term “stages.” Multi-stage compressors use two stages and can handle more capacity and pressure. One stage involves pressurizing air using a piston and a lower-pressure cylinder. This compressed air is then moved to a storage tank. Single-stage models tend to be more energy-efficient than their two-stage counterparts. But if you don’t need a high-pressure cylinder, a single-stage air compressor can be the best choice.
Hoewel eentraps luchtcompressoren minder vermogen leveren, kunnen ze voldoende lucht produceren om pneumatisch gereedschap en andere pneumatische apparatuur aan te drijven. Deze eentrapsmodellen zijn het meest geschikt voor kleinere klussen thuis en doe-het-zelfprojecten. Voor meer industriële toepassingen is een tweetrapsmodel de beste keuze. Maar als u haast heeft, kan een eentrapsmodel volstaan. Uiteindelijk hangt het ervan af waarvoor u de luchtcompressor wilt gebruiken.
Single-stage air compressors feature a single cylinder, one piston stroke for each revolution of pressurized air. Single-stage compressors are typically smaller and more compact, making them a good choice for smaller work environments. Their cfm capacity (cubic feet per minute) is an important indicator of operating capacity. If you plan to use multiple pneumatic tools, you will probably need a higher cfm model. Similarly, the horsepower of single-stage compressors indicates its working capacity. One horsepower moves 550 pounds per foot per minute.
Meertraps luchtcompressoren zijn over het algemeen duurder en energiezuiniger dan eentraps exemplaren, maar ze kunnen een hogere luchtstroom leveren. Hoewel ze complexer kunnen zijn, kunnen ze de algemene bedrijfskosten verlagen. Als u van plan bent uw luchtcompressor voor industrieel of commercieel gebruik in te zetten, is een tweetraps model wellicht de beste keuze. Als u de luchtcompressor echter voor massaproductie wilt gebruiken, is een eentraps model mogelijk de beste optie.
Single-stage air compressors have the same piston size and number of inlets, while dual-stage models have a smaller first piston and a much longer second piston. Both have a cooling tube in between the two pistons to reduce the air temperature before the second round of compression. The single-stage model is typically small and portable, while the double-stage air compressor is stationary. These compressors can both be stationary and large.
Geluidsarme modellen
Ondanks de naam zijn geluidsarme luchtcompressoren niet allemaal hetzelfde. Het geluidsniveau van een compressor kan door verschillende factoren worden beïnvloed, waaronder de stroombron en de afstand tot de machine. Zuigercompressoren zijn over het algemeen luider dan elektrische compressoren vanwege de vele bewegende onderdelen. Daarentegen hebben schroefcompressoren en scrollcompressoren minder bewegende onderdelen en zijn ze stiller.
Het geluidsniveau van een benzine-aangedreven luchtcompressor kan extreem hoog zijn, waardoor deze ongeschikt is voor gebruik binnenshuis. Om dit probleem te verhelpen, kunt u kiezen voor een elektrisch model. Het geluidsniveau van een compressor wordt voornamelijk veroorzaakt door wrijving in de motor. De behuizing van een zuiger is ook een belangrijke factor in het geluid, aangezien zuigers met minimale behuizing veel lawaai produceren. Vroeger was olie nodig voor een stille compressor. Dit is echter veranderd dankzij de vraag vanuit de medische sector naar olievrije modellen.
The CZPT EC28M Quiet Air Compressor is another model that features quiet operation. This air compressor makes 59dB of noise. This level is low enough to allow you to carry on normal conversations while it cycles. In addition, this compressor has an industrial oil-free pump and a 2.8 Amp direct-drive induction motor. These two features make it a great choice for businesses.
Er zijn geluidsarme luchtcompressoren beschikbaar voor de bouwsector. Deze compressoren zijn echter niet per se van lage kwaliteit. Daarom is het belangrijk om rekening te houden met het geluidsniveau van uw luchtgereedschap voordat u er een aanschaft. De specialisten van CZPT kunnen u adviseren over de geluidsarme modellen die het beste bij uw specifieke toepassing en ruimte passen. Geluid kan mensen die in de buurt van de compressor werken afleiden. Daarom kiezen veel bedrijven tegenwoordig voor deze geluidsarme modellen.
Olievrije modellen
Er zijn diverse olievrije luchtcompressoren verkrijgbaar, maar wat maakt ze nu zo bijzonder? Olievrije compressoren bevatten geen olie, maar worden gesmeerd met vet. Ze zijn een goede keuze als u met een kleine compressor werkt en het risico op beschadiging wilt minimaliseren. Aan de andere kant genereren olievrije modellen wel aanzienlijke warmte, wat de compressor kan beschadigen. De hogere druk kan ervoor zorgen dat de compressor tegen zichzelf schuurt of zelfs vervormt.
Enkele basiskennispunten kunnen u helpen bij het kiezen van de beste olievrije luchtcompressor voor uw behoeften. Het vermogen van een compressor (in pk) is bijvoorbeeld een maat voor hoe krachtig de motor is. Een hoger vermogen betekent een hogere PSI of ACFM. U kunt de twee ook gebruiken om ze te vergelijken. Scrolltechnologie is een modern luchtcompressiesysteem dat gebruikmaakt van een stationaire en een bewegende spiraal. Dit vermindert het luchtvolume in de compressor door de lucht naar het midden te leiden.
Een olievrije luchtcompressor kopen hoeft geen lastige klus te zijn. Een goede distributeur kan u adviseren over welk type olievrije luchtcompressor het beste bij u past. Zo kunt u geld besparen en met een gerust hart uw luchtcompressor gebruiken. En natuurlijk is de beste manier om een goede deal te krijgen voor een luchtcompressor, om te praten met een distributeur die verstand heeft van de beschikbare producten.
Een olievrije luchtcompressor is een uitstekende optie voor bedrijven die gevoelig zijn voor luchtverontreiniging. In bijvoorbeeld de farmaceutische en voedingsmiddelenindustrie kan een minuscule hoeveelheid olie een product bederven of zelfs productieapparatuur beschadigen. Olievrije luchtcompressoren hebben over het algemeen lagere onderhoudskosten dan oliegekoeld model, omdat ze minder bewegende onderdelen bevatten. Hierdoor vereisen olievrije luchtcompressoren minder onderhoud en moeten ze mogelijk nog steeds af en toe worden vervangen.
A few advantages of an oil-free air compressor over an oil-lubricated one include lower noise levels. Oil-free air compressors tend to be less noisy and run more quietly than oil-injected ones, but you should still carefully weigh the pros and cons before making a decision. Also, consider how much you use your air compressor before choosing a model. The pros outweigh the cons. In the end, you’ll be glad you chose an oil-free air compressor.


editor by CX 2023-04-22
