Product Description
Product description
| 1 | Model | DSB22M |
| 2 | Type | Fixed permanent magnet series oil-free screw blower |
| 3 | Dimensions(Length*width*height) | 1500*1140*1650mm |
| 4 | Installation method | Fixed installation without foundation |
| 5 | Rated displacement | 8.50 m3/min |
| 6 | Pressure adjustment range | 120 kPa |
| 8 | Exhaust gas temperature | 130ºC |
| 9 | Compression level | Single-stage |
| 10 | Transfer method | Direct |
| 11 | Compressed oil consumption | 20 L |
| 12 | Cooling method | Wind cold |
| 13 | Cooling air volume | 4400 m3/h |
| 14 | Ambient temperature | 0 ~ 45 ºC |
| 15 | Noise | ≤85 dB(A) |
| 16 | Equipment weight | 980 kg |
| 20 | Power | 22 kW |
| 21 | Voltage | 380/50 V/HZ |
| 22 | Start method | Frequency conversion start |
| 23 | Motor protection level | IP65 |
| 24 | Insulation class | F |
| 25 | Fan power | 0.86 kW |
| 26 | Gas outlet pipe diameter | DN100 |
Technical Parameters
| Model | Exhaust pressure(kpa) | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 |
| DSB-XXX-M | Flow | 15.7 | 15.6 | 15.1 | 14.9 | 14.7 | 20.4 | 14.4 | 14.3 | 19.9 | 13.6 | 13.3 | 13.2 |
| Power | 11 | 15 | 18.5 | 18.5 | 22 | 30 | 30 | 30 | 37 | 37 | 37 | 45 | |
| Flow | 21.30 | 21.2 | 21.1 | 26.0 | 20.6 | 25.7 | 25.5 | 20.0 | 25.0 | 19.7 | 19.5 | 19.4 | |
| Power | 15 | 18.5 | 22 | 30 | 30 | 37 | 37 | 37 | 45 | 45 | 45 | 45 | |
| Flow | 26.8 | 26.6 | 31.1 | 30.9 | 30.8 | 30.6 | 30.5 | 25.3 | 30.2 | 24.8 | 24.6 | 29.7 | |
| Power | 18.5 | 22 | 30 | 37 | 37 | 45 | 45 | 45 | 55 | 55 | 55 | 75 | |
| Flow | 31.5 | 31.3 | 45.8 | 40.4 | 40..0 | 39.8 | 30.3 | 30.3 | 39.0 | 43.5 | 43.2 | 38.0 | |
| Power | 22 | 30 | 45 | 45 | 55 | 55 | 55 | 55 | 75 | 90 | 90 | 90 | |
| Flow | 41.2 | 46.0 | 54.6 | 50.5 | 54.0 | 53.8 | 44.4 | 44.1 | 49.0 | 52.7 | 52.5 | 52.2 | |
| Power | 30 | 37 | 55 | 55 | 75 | 75 | 75 | 75 | 90 | 110 | 110 | 110 | |
| Flow | 50.9 | 54.8 | 70.5 | 65.3 | 70.0 | 64.8 | 60.2 | 53.2 | 59.8 | 68.6 | 63.5 | 63.2 | |
| Power | 37 | 45 | 75 | 75 | 90 | 90 | 90 | 90 | 110 | 132 | 132 | 132 | |
| Flow | 61.7 | 65.9 | 81.8 | 77.3 | 81.4 | 70.5 | 69.4 | 64.2 | 68.9 | / | / | 68.0 | |
| Power | 45 | 55 | 90 | 90 | 110 | 110 | 110 | 110 | 132 | / | / | 160 | |
| Flow | 82.1 | 71.1 | 90.4 | 81.6 | 90.01 | 81.30 | 81.15 | 89.52 | 89.33 | / | / | / | |
| Power | 75 | 75 | 110 | 110 | 132 | 132 | 132 | 132 | 160 | 185 | / | / | |
| Flow | 92.10 | 81.85 | / | / | / | / | 89.71 | / | / | / | / | / | |
| Power | 90 | 90 | / | / | / | / | 160 | / | / | / | / | / |
Oil-injected screw compressor
Advantages: The pressure is stable, and it can be post-installed to remove water, dust and bacteria;
Disadvantages: Exhaust gas contains a lot of oil, causing pollution to the cloth, which does not meet the production requirements of melt-blown cloth.
Roots screw blower
Advantages: The exhaust does not contain oil or water
Disadvantages: The exhaust temperature is too low, contrary to the temperature requirements of the mold spinneret, which originally required heating and constant temperature, but he sent cooling air, which is likely to cause unstable melting temperature. The spinneret contains crystals, dust, and Bacteria, the pressure is unstable, because of its characteristic is that there is no pressure ratio, the outlet pressure is 80kpa, if you want to add sterilization and pre-dust removal, it will cause insufficient pressure, and the spinner does not form or block.
Oil-free screw blower
Advantages: stable pressure (40kpa ~ 150kpa variable frequency adjustable), high exhaust temperature (outlet 120 degrees Celsius), helps to constant melting temperature, can be oil-free, water-free, dust-free, sterile
Disadvantages: the price is more expensive
Certificate
Project Case
As a new environmental protection and energy saving product, oil-free screw blower can be widely used in various industries. The main industries are:
1. Water treatment
Mainly used for aeration to fully mix water and reactants
Industry: Municipal / industrial wastewater treatment, electronics industry, papermaking, metallurgy, leather, printing and dyeing, etc.
2. Transportation
Mainly used for light particle powder and line conveying
Industry: Production of cement, lime powder, titanium dioxide chemical fiber micronets, etc.
3. Biological fermentation and breeding
Mainly used for oxygen supply and stirring
Industry: Food, brewing, breeding oxygen supply, cement / smelting desulfurization and denitrification, etc.
3. Powder conveying
Mainly used for powder transportation of light particles
Industry: Production of cement, lime powder, titanium dioxide, etc.
Customer Feedback
Packaging and Shipping
Our workers pack the tested air compressors in wooden cases. After the packaging is completed, the air compressor will be transported to the port and then shipping to the world.
Company Profile
Dehaha Compressor was founded in 1996 with over 150 skilled employees and more than 25 R&D engineers’ teams.We focus on the research & develop, manufacture and energy-saving solutions of screw air compressor to create value for customers and society.
Dehaha opened to the world since 2015, and now we have a foreign trade department with more than dozens people, serving customers around the world 24 hours. We have sales representatives who can speak English, Spanish, Portuguese, French,and Russian which makes it easier for our clients from all over the world to interact and negotiate with us.now our valued customers are over 130 countries. Germany Standard and 13 years exporting experience help us won more than 50 loyal overseas agents.
Dehaha continuously innovates product development and management to meet customers’ demand. The powerful enterprise culture and continuous innovation make CZPT improved rapidly to reach the business principle “Energy Saving First, Mutual Value Shared”. The production line of CZPT is consist of screw air compressor from 5.5KW to 550KW, oil free air compressor, portable air compressor, permanent magnet variable frequency air compressor, high pressure air compressor and compressed air purification equipment,etc.
Dehaha mission is to be a world-renowned high-end brand, with sustainable development, constantly improving its own value and sharing it with our customers and staff. Committed to offer our customers a silent and energy-saving manufactured products.
Our Service
1.24/7 after sales service support in different languages.
2.Follow up the feedback of products in 2 months interval by email or call.
3.Guidance of installation and commissioning on site can be provided by factory-trained technicians or local Authorized Service Center.
4.Technical training for customers in DEHAHA air compressor factory or working site.
5.Plenty of original spare parts with proven quality are all available from our central stocks in ZheJiang and all distributors’depots.
6.All kinds of technical documents in different languages.
Why choose us?
1.Quality Guarantee
With more than 24 years industry experience and our compressor approved by CE, ISO9001, SGS, And TUV test.The raw materials are strictly inspected and Some key parts are imported from overseas.Each compressor must pass at least 5 hours of continuous testing before leaving the factory.
2.Warranty Period
The complete machines are proviede with one-year warranty, and the compressor air end with Two-year warranty and lifetime maintenance(With the exception of wearing parts)
3. Installation and Commissioning
Provied customers with installation and commissioning instructions,and all service-providing personnel are strictly trained technically by our company.
4.After -sales Services
Our company has service network in world, giving prompt replies to customers after notified within 24~48hours for troubleshooting.
5.Spare Parts
Our company always supply spare parts on most favorable terms.
FAQ
Q1. Are you trading company or manufacture ?
A: We are professional manufacture of screw air compressor of HangZhou(Close to ZheJiang ), China, more than 24 years.
Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.
Q3. What’s payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.
Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3.CZPT agents and after service avaiable.arrange our engineers to help you training and installation.
Q5. How about your warranty?
A: One year for the whole machine and 2 years for screw air end, except consumable spare parts.
Q6. Do you have any certificate ?
A: Yes, per different customer’s market need ,we can offer CE ,ISO etc certificate.
Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.
Q8. How do you control quality ?
A: 1.The raw materials are strictly inspected
2. Some key parts are imported from overseas
3.Each compressor must pass at least 5 hours of continuous testing before leaving the factory.
Q9. Do you offer OEM service ?
A: Yes.Both OEM & ODM service can be accepted.
Q10.How long could your air compressor be used?
A: Generally, more than 10 years.
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated|
|
|---|
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Customization: |
Available
|
|
|---|
Choose an Air Compressor for Your Business
There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
Positive displacement
Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are two different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
Single-stage
The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only one cylinder, which means one stroke is required to move air from one cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the one with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have one air intake, and two-stage air compressors have two air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
low noise
Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The two water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers two models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and two universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
editor by CX 2023-05-30
