Tag Archives: making machine

China China Products/Suppliers. High Productivity Biscuit Making Machine Equipment Biscuit Machinery

Product Description

Full-automatic wafer/waffle production line

1introduction

Full-automatic wafer production line is designed and manufactured according to the facts of domestic biscuit manufacturing industry and absorbing the most well-known wafer production lines of many oversea manufacturers, which features reliable performance,compact structure,small occupation,high yield,lower energy consumption,convenient maintenance,simple operation. 

It consists of baking oven,cooling tower,sheet picking machine,cream spreading machine,cooling cabinet,cutting machine,batter mixer,cream mixer and smash machine.

The driven motors adopt SEW Germany, the bearings use CZPT Germany. Operating system uses PLC programing to make the process automated and easy control.
 

2Production layout

3Material and parameters(Different models of the machine will have different parameters, for reference only)
1. Output: 28 pcs wafer sheets per min (based on basic wafer recipe)
2. Total power :42.41KW((380V, 50HZ)
3. Rate of finished product:≥95%
4. Gas supply pressure: 0.02-0.04 kg/cm2
5. Gas consumption:
LPG: about 27 kg/hour
Natural gas: about 38 M3 /hour
6. Air compression value: 0.9M3/Min/0.8MPA
7. Baking plate size:    470mm×325mm
8. Effective cutting size:455mm×315mm
9.Whole line dimension(L×W×H): 28.0m×2.0m×2.5m
10.Whole line weight: about 21 tons
11.Worker:4 person ( excluding packing workers)
12. Installation and Commissioning Person: 1-2 persons
143.Installation time: 2 weeks
14.Shipping Container: 2×40’HQ
15.Delivery time: 90 days upon receipt of deposit

4product photo: 

4Order Name Power(KW) Quantity
1.1 flat baking oven 165.5 1
2 sheet receiver 0.18 2
3 cooling tower 0 2
4 sheet packing machine 0.36 2
5 intermittent sheet supplier 0.36 2
6 conveyor 0.18 1
7 humidifying cabinet 7.5 1
8 cream coating machine 7.17 1
8.1 first coating machine 1.5 1
8.2 blast compressor 1.1 1
8.3 secong coating 1.5 1
9 sheet cmposite sorter 0.12 1
10 air-powered laminating machine 0.75 1
11 inlet conveyor of cold cabinet 0.75 1
12 105METER freezer 12.258 1
13 water –cooling units 1
14 Rotary saw blade cutting machine 0.93 1
15 smash machine 1

5product photo:


Company Introduction

  Our company can manufacture automatic wafer production line including tunnel baking machine, sheet packing machine, cooling tower machine, cream spreading machine, cooling cabinet, cream mixer, distribute machine and other machines, with many advantages of reliable performance, high yield, low power, convenient maintenance, easy operation, no environmental pollution, etc, and receives good reputation from our customers. 

Overseas sales

Our products not only sell well in domestic market, but also are widely exported to many countries around the world, such as Indonesia, Vietnam, the Philippines, Bangladesh, Pakistan, Uzbekistan, Jordan, Algeria, Romania, Poland, Finland, Turkey, Syria, Brazil and other countries.

 

Our sales aim is to maximize customer satisfaction and expand the company’ s brand. The equipment technical performance, quality and customer requirement will be strictly checked and managed before marketing. We have perfect after-sales service system as well as an experienced testing engineers group who can provide timely and prompt services of equipment maintenance, component replacement, and FAQ for users.

6Q&A
1.Q: Are you manufacturer?

    A: Yes, we are factory specialized in Wafer making machine production line,Chocolate coating machine,Ball wafer production line and so on.our product is characteriszed by its high quality, energy-saving and competitive price. I think it will find a market in your country.

2.Q: How do you ship the wafer machine?

   A: Usually by sea, but can also according to customer requirements. 

3.Q: Why choose us?

   A: –we are China leading snack food machinery supplier.

        1.Distinguished Made-in-china  supplier.

        2.Any inspection before shipment.

        3.Best quality & best service with competitive price. 

5. Q: Is there a variety of language options for your operating system?

    A: We use PLC controller system, Motor SWE from Germany. I thinks our products will meet your requirments. It will be great appreciated if you can come and see our workshops.

What to Look For When Buying an Air Compressor

An air compressor is a very useful tool that can help you complete many different types of construction jobs. This handy machine makes many tasks much easier, but not all of them are created equally. Understanding what to look for when buying an air compressor will help you make an informed decision. Here are some of the things you should look for. These include price, size, and energy efficiency. Also, make sure to consider the air compressor’s type.
air-compressor

Single-stage air compressors are quieter

When it comes to noise level, single-stage air compressors are the way to go. These machines have fewer moving parts and are quieter than two-stage models. Single-stage air compressors use an axial flow design and can be quieter than their dual-stage counterparts. Single-stage air compressors can run longer and at lower pressures. Single-stage air compressors can be used for light industrial applications. They have a long life expectancy, with some models lasting for over 3 thousand hours.
While some single-stage air compressors are quieter than two-stage air compressors, both models have noise-reduction features. One type features rubber parts, which are designed to dampen noise. Another feature makes a compressor quieter: its location near the job site. Some models feature rubber base plugs and rubber mats to reduce floor vibrations. In addition to using these features, single-stage compressors are easier to transport.
Noise levels are important when choosing an air compressor. Some machines are too noisy for comfortable work, and some businesses don’t want to expose customers to noise-generating air compressors. Other noise levels can even endanger workers’ health. Single-stage air compressors are more affordable than dual-stage compressors. They are also quieter and more powerful. But be prepared for the noise. Some single-stage air compressors are still noisy.
Compared to their two-stage counterparts, single-stage compressors are quieter when running at full capacity. However, double-stage compressors are quieter on low capacities than single-stage units. Those with variable speed are quietest at lower capacities. The difference is about 10db. If you’re concerned about the noise level, you should consider a two-stage air compressor. But if you have a small workshop, it may not be suitable for you.
One-stage air compressors are generally more efficient than two-stage air compressors. The noise from a two-stage air compressor is lower because there’s no intermediate stage. Single-stage air compressors also use a piston that rotates in a single stage, while dual-stage air compressors, also known as duplex models, are more efficient. A single-stage air compressor is quieter, but double-stage compressors are louder.
air-compressor

Two-stage air compressors are more energy efficient

Two-stage air compressors are more energy-efficient than single-stage machines. The efficiency of two-stage air compressors is increased through a combination of improved efficiency and increased longevity. These machines can store more air and have higher compression ratios. One model of a two-stage compressor can hold approximately 83 cubic feet of air at 100 PSI and 120 cubic feet at 150 PSI. A two-stage compressor is also quieter.
Two-stage air compressors are more energy-efficient because they have 2 pistons instead of one. These air compressors achieve a higher pressure rating and recover more quickly. This type of compressor is perfect for jobs that require high air pressure for a prolonged period of time. In addition, they can operate multiple tools simultaneously. This makes them better for commercial and industrial use. Listed below are some benefits of two-stage air compressors.
Single-stage air compressors can power tools in the garage or kitchen, but they are not as reliable for industrial applications. Single-stage compressors have larger parts that tend to experience condensation. Furthermore, single-stage compressors do not last long in continuous use and are less energy-efficient than two-stage ones. Whether you’re using the compressor for a single tradesperson, a small crew, or a large construction crew, two-stage compressors are the best choice.
Single-stage air compressors are often used in small-scale food preparation and production. Single-stage air compressors are easy to transport between locations, and can be plugged into several electrical outlets. Single-stage compressors are also ideal for high-volume food processing. A dual-stage air compressor is ideal for industrial use. In some cases, you can even move the single-stage air compressor between two-stage air compressors.
Single-stage compressors often cycle too quickly, drawing more electricity than two-stage units. A variable speed unit stays on a low speed for hours at a time. Single-stage air conditioners force you to lower your thermostat settings while single-stage air conditioners run too often. Both units are energy-efficient but they are not as energy-efficient as variable-speed compressors. The main difference is that single-stage air conditioners tend to drain the power source quicker.

Piston-driven air compressors are quieter

A piston-driven air compressor is 1 of the quietest types of air compressors. It is less noisy than reciprocating air compressors. A piston-driven air compressor can reach 62 decibels, while a scroll compressor is around half that volume. The 2 main components of a scroll air compressor are the piston and the helical screw. These air compressors are both very efficient and quiet.
Older compressors are incredibly noisy. They produce a “wumpa” noise similar to a large engine. They are also capable of producing a high-pitched whine. These noises can be deafening, especially in a small workshop. That’s why it’s essential to look for a quiet compressor. But what makes a compressor quiet? Read on to learn more about this essential tool.
Another difference between piston-driven air compressors and electric-driven air compressors is the power source. Electric air compressors produce less noise than gas-powered compressors, which use an engine. Piston-driven air compressors are also more efficient. They also generate less heat, making them an ideal choice for offices and other settings where noise is a problem. The best way to decide between the 2 types of air compressors is to check the manufacturer’s warranty and read the ‘Description’.
Noise reduction is the first priority of a compressor’s owner, so make sure that you have the right model. If you’re working on something sensitive, don’t place the compressor too close to a building where people might be nearby. Noise can be very disruptive to the workspace and can cause health problems. To help combat noise, you’ll need to buy a quiet air compressor. And don’t forget to consider its location: Piston-driven air compressors are quieter than their reciprocating counterparts.
Piston-driven air compressors are quiet because the piston is made of thin metal and more rubber, which absorbs the sound. Unlike reciprocating air compressors, piston-driven air compressors are more efficient than their dual-piston cousins, which are quieter and more powerful. So which type is right for you? Take a look at some of the main differences between the two. If you want a quiet compressor, make sure it meets the specifications required by the job you’re working on.
air-compressor

Oil-lubricated air compressors are more cost-effective

There are several reasons why oil-lubricated air compressors are more expensive than dry-type air compressors. First of all, oil-lubricated air compressors tend to be more reliable and quiet. Additionally, oil-lubricated air compressors require fewer parts and can last longer than dry-type air compressors. These are just a few of the many benefits of using oil-lubricated air compressors.
Oil-free air compressors have some disadvantages. They are less durable and may not be as efficient as oil-lubricated models. Additionally, because oil-lubricated air compressors use oil, they can get very noisy. While they are less expensive, they are not the best option for heavy-duty work. However, modern oil-free air compressors have soundproofing and are suitable for industrial use.
When purchasing an oil-lubricated air compressor, make sure to choose 1 with a tank capacity that meets your needs and your space. Larger tanks can be more expensive than small tanks, but larger units are easier to move around. Also, be sure to consider the weight and size of the portable air compressors when making your choice. If the weight is too large, you may have trouble carrying it from place to place.
Another benefit of using oil-lubricated air compressors is their reduced need for oil. These models can last up to a decade longer than oil-free counterparts. Oil-free air compressors are more affordable and can achieve the same high performance as their oil-lubricated counterparts. Many industrial applications benefit from these air compressors. So, which 1 is right for you? We’ve listed a few of them below.
Another benefit of choosing an oil-lubricated air compressor is the reduced cost of maintenance. This type is more durable than its oil-lubricated counterparts, which require regular oil changes to keep them running smoothly. However, it is not feasible to transport an oil-lubricated compressor, which means that you must install it permanently to keep it working efficiently. In addition, these air compressors are difficult to move and are not portable, which can limit your ability to use it in a pinch.

China China Products/Suppliers. High Productivity Biscuit Making Machine Equipment Biscuit Machinery  China China Products/Suppliers. High Productivity Biscuit Making Machine Equipment Biscuit Machinery

China Wafer Production Line Making Baking Machine Snack Food

Product Description

Full-automatic wafer/waffle production line

1introduction

Full-automatic wafer production line is designed and manufactured according to the facts of domestic biscuit manufacturing industry and absorbing the most well-known wafer production lines of many oversea manufacturers, which features reliable performance,compact structure,small occupation,high yield,lower energy consumption,convenient maintenance,simple operation. 

It consists of baking oven,cooling tower,sheet picking machine,cream spreading machine,cooling cabinet,cutting machine,batter mixer,cream mixer and smash machine.

The driven motors adopt SEW Germany, the bearings use CZPT Germany. Operating system uses PLC programing to make the process automated and easy control.
 

2Production layout

3Material and parameters(Different models of the machine will have different parameters, for reference only)
1. Output: 28 pcs wafer sheets per min (based on basic wafer recipe)
2. Total power :42.41KW((380V, 50HZ)
3. Rate of finished product:≥95%
4. Gas supply pressure: 0.02-0.04 kg/cm2
5. Gas consumption:
LPG: about 27 kg/hour
Natural gas: about 38 M3 /hour
6. Air compression value: 0.9M3/Min/0.8MPA
7. Baking plate size:    470mm×325mm
8. Effective cutting size:455mm×315mm
9.Whole line dimension(L×W×H): 28.0m×2.0m×2.5m
10.Whole line weight: about 21 tons
11.Worker:4 person ( excluding packing workers)
12. Installation and Commissioning Person: 1-2 persons
143.Installation time: 2 weeks
14.Shipping Container: 2×40’HQ
15.Delivery time: 90 days upon receipt of deposit

4product photo: 

4Order Name Power(KW) Quantity
1.1 flat baking oven 165.5 1
2 sheet receiver 0.18 2
3 cooling tower 0 2
4 sheet packing machine 0.36 2
5 intermittent sheet supplier 0.36 2
6 conveyor 0.18 1
7 humidifying cabinet 7.5 1
8 cream coating machine 7.17 1
8.1 first coating machine 1.5 1
8.2 blast compressor 1.1 1
8.3 secong coating 1.5 1
9 sheet cmposite sorter 0.12 1
10 air-powered laminating machine 0.75 1
11 inlet conveyor of cold cabinet 0.75 1
12 105METER freezer 12.258 1
13 water –cooling units 1
14 Rotary saw blade cutting machine 0.93 1
15 smash machine 1

5product photo:


Company Introduction

  Our company can manufacture automatic wafer production line including tunnel baking machine, sheet packing machine, cooling tower machine, cream spreading machine, cooling cabinet, cream mixer, distribute machine and other machines, with many advantages of reliable performance, high yield, low power, convenient maintenance, easy operation, no environmental pollution, etc, and receives good reputation from our customers. 

Overseas sales

Our products not only sell well in domestic market, but also are widely exported to many countries around the world, such as Indonesia, Vietnam, the Philippines, Bangladesh, Pakistan, Uzbekistan, Jordan, Algeria, Romania, Poland, Finland, Turkey, Syria, Brazil and other countries.

 

Our sales aim is to maximize customer satisfaction and expand the company’ s brand. The equipment technical performance, quality and customer requirement will be strictly checked and managed before marketing. We have perfect after-sales service system as well as an experienced testing engineers group who can provide timely and prompt services of equipment maintenance, component replacement, and FAQ for users.

6Q&A
1.Q: Are you manufacturer?

    A: Yes, we are factory specialized in Wafer making machine production line,Chocolate coating machine,Ball wafer production line and so on.our product is characteriszed by its high quality, energy-saving and competitive price. I think it will find a market in your country.

2.Q: How do you ship the wafer machine?

   A: Usually by sea, but can also according to customer requirements. 

3.Q: Why choose us?

   A: –we are China leading snack food machinery supplier.

        1.Distinguished Made-in-china  supplier.

        2.Any inspection before shipment.

        3.Best quality & best service with competitive price. 

5. Q: Is there a variety of language options for your operating system?

    A: We use PLC controller system, Motor SWE from Germany. I thinks our products will meet your requirments. It will be great appreciated if you can come and see our workshops.

How to Repair and Maintain an Air Compressor

A compressor is a device used to move air from 1 place to another. Air enters the air compressor through the intake valve. Inside the compressor, the vanes on the inner rotor rotate within an eccentric cavity. The self-adjusting length arm divides the space into multiple cavities of different sizes. As the rotor rotates, air fills the cavity. As air flows around the cavity, it builds pressure and is squeezed out of the compressor output.

Positive displacement

Positive displacement air compressors use reciprocating pistons to compress air. Gas is drawn in during the suction stroke and compressed by moving the piston in the opposite direction. It then discharges the compressed air by moving it in the opposite direction. This type of air compressor is most commonly found in automobiles, refrigerators, and other applications that require high pressure. However, it is not as efficient as a centrifugal compressor.
Most modern air compressors use positive displacement. Positive displacement models capture a volume of air in the compression chamber and distribute it when the pump is operating at maximum capacity. They are more economical than their negative displacement counterparts. Reciprocating screw air compressors are the most common positive displacement compressors. The reciprocating screw air compressor adopts a water jacket around the cylinder and is often used in processes such as oil drilling.
A bicycle pump is an example of positive displacement compression. Air is drawn into the cylinder and compressed by the moving piston. A piston compressor works on the same principle, but it uses a rotating crankshaft or connecting rod to complete the movement of the pistons. There are 2 types of positive displacement compressors: single-acting and double-acting. Both types work on the same principle, both are positive displacement compressors. The difference between the 2 types is the pressure ratio.
In air compression, positive displacement compression reduces the volume of the fluid and reduces its viscosity. This results in higher pressure ratios and is used in centrifugal, axial, and scroll compressors. Positive displacement is a common feature of most air compressors. Positive displacement compressors offer the same benefits and are more energy-efficient when applied to oil-free and gas applications. This type of compression is usually the best choice for low-pressure applications.
air-compressor

oil free

If you’re looking for an air compressor for your business, consider an oil-free air compressor. These models offer cleaner, quieter operation than traditional air compressors and require less maintenance. They also meet ISO Class 0 or Class 1 air purity requirements. Oil-free air compressors are also quieter, with fewer moving parts and less noise. These advantages make oil-free air compressors an ideal solution for many commercial applications.
Air purity is critical in many industries. Even the tiniest drop of oil can damage production equipment or damage products. The best way to find an oil-free air compressor for your business is to consider the process and end product. As air quality improves, more and more businesses are turning to oil-free compressors. Some of the advantages and disadvantages of these air compressors are:
When choosing an oil-free air compressor, it is important to understand the terminology used in the industry. Knowing these terms will make it easier for you to choose the right compressor for your needs. ACTFM, or actual cubic feet per minute, is an industry term for measuring the amount of air pumped in 1 minute under rated conditions. Although a simple number, it can be very useful in determining which type of air compressor is best for your application.
The ISO 8573-1 international standard defines air quality and provides air purity classifications. The strictest classification is air purity class 0. Many manufacturers claim that oil-free air compressors meet this standard. However, a class 0 oil-free air compressor does not necessarily mean that the air is free of contaminants. In fact, Class 0 is the benchmark for air purity. While zero air quality is the highest level, that doesn’t mean it’s completely oil-free.
air-compressor

double acting

A double-acting air compressor is a device that uses compressed air to generate electricity. Its working principle is based on piston and connecting rod. The connecting rod connects the crankshaft to the piston through pins and caps. The piston moves as the piston moves. Rods are usually made of forged carbon steel. In terms of service and maintenance, double-acting compressors require regular vise maintenance and proper cleaning.
The displacement of the compressor is a measure of the displacement that the piston can produce in a certain period of time. Displacement is usually expressed in actual cubic feet per minute. The exact calculation depends on the type of cylinder and the configuration of the compressor. Single-acting cylinders can have head-end or crank-end displacement, both of which can be measured using the displacement equation. A double-acting air compressor will use this equation. 4 and 6 calculate the displacement.
Double-acting air compressors have multiple cylinders and are made of cast iron. They are water-cooled and have a mechanical connection between the piston and connecting rod. A double-acting compressor compresses air twice per revolution of the motor. One cylinder moves up, while the other cylinder moves down. The piston moves down, allowing air to enter through valve #1. During the operation of the compressor, the temperature of the air and gas increases.
Double-acting air compressors typically have high pressure and are considered workhorses. Double-acting compressors also feature intercooling and double compression. As a result, these machines tend to last longer than single-acting compressors. Its low speed and dual compression make it a workhorse in the compressor industry. Double-acting air compressors are workhorses and versatile devices.
air-compressor

fuel tank pressure switch

You can adjust the pressure in the air compressor tank by adjusting the differential pressure. You can turn the mainspring clockwise or counterclockwise to increase or decrease the pressure. This valve will open when the pressure is low enough to start the compressor. If the pressure is too low, the valve should be closed. The cut-in and cut-out pressures should be set to appropriate values. After adjusting the tank pressure, check the hysteresis of the tank pressure switch and set the desired shutoff pressure.
If the pressure in the tank falls below the cut-in level, the tank pressure switch must be replaced. You can test the switch with a multimeter. Make sure the switch is not damaged. If you can’t find the switch, you can look at the other sections. If you find any damaged or missing parts, you should replace them. Otherwise, it may be time to check the tank pressure switch. You may need to disassemble the compressor and remove the switch.
The fuel tank pressure switch is an important part of the air compressor. It keeps you informed of the amount of air delivered by the compressor. If your tank or tank is damaged, your readings will be wrong. If the pressure switch is damaged, it will not function properly and result in incorrect readings. Fortunately, there are some easy ways to fix this. To prevent this from happening, keep the tank pressure switch in good condition.
When the air pressure in the tank drops to the cut-in pressure setting, the switch allows power to flow through it. This will start the motor and pump of the air compressor. Then, if the pressure in the tank rises above the cut-off level, the switch will trip and stop the compressor. This will prevent it from being over-pressurized. Power flow will continue to flow to the motor. Depending on your compressor model, you can change the cut-in and cut-out pressures as needed.

energy source

The power supply of the air compressor is very important. Most air compressors run on 12 VDC, which is ideal for automotive use. Alternatively, you can buy a switching power supply for around $20. No matter which power supply you choose, you must ensure that it can support the maximum current of the compressor. You can find power supplies in all sizes, from quarter-horsepower to five-horsepower.
The voltage required for a three-phase air compressor will vary. Three-phase air compressors require 3 separate power cords and a three-phase electrical service panel. This is because a standard 120/240-volt electrical service panel is not sufficient to power a three-phase compressor. Additionally, three-phase compressors require 3 separate isolated wires for the engine and motor circuits. Three-phase compressors do not require a neutral wire.

China Wafer Production Line Making Baking Machine Snack Food  China Wafer Production Line Making Baking Machine Snack Food

China Biscuit Making Machine

Product Description

Full-automatic wafer/waffle production line

1introduction

Full-automatic wafer production line is designed and manufactured according to the facts of domestic biscuit manufacturing industry and absorbing the most well-known wafer production lines of many oversea manufacturers, which features reliable performance,compact structure,small occupation,high yield,lower energy consumption,convenient maintenance,simple operation. 

It consists of baking oven,cooling tower,sheet picking machine,cream spreading machine,cooling cabinet,cutting machine,batter mixer,cream mixer and smash machine.

The driven motors adopt SEW Germany, the bearings use CZPT Germany. Operating system uses PLC programing to make the process automated and easy control.
 

2Production layout

3Material and parameters(Different models of the machine will have different parameters, for reference only)
1. Output: 28 pcs wafer sheets per min (based on basic wafer recipe)
2. Total power :42.41KW((380V, 50HZ)
3. Rate of finished product:≥95%
4. Gas supply pressure: 0.02-0.04 kg/cm2
5. Gas consumption:
LPG: about 27 kg/hour
Natural gas: about 38 M3 /hour
6. Air compression value: 0.9M3/Min/0.8MPA
7. Baking plate size:    470mm×325mm
8. Effective cutting size:455mm×315mm
9.Whole line dimension(L×W×H): 28.0m×2.0m×2.5m
10.Whole line weight: about 21 tons
11.Worker:4 person ( excluding packing workers)
12. Installation and Commissioning Person: 1-2 persons
143.Installation time: 2 weeks
14.Shipping Container: 2×40’HQ
15.Delivery time: 90 days upon receipt of deposit

4product photo: 

4Order Name Power(KW) Quantity
1.1 flat baking oven 165.5 1
2 sheet receiver 0.18 2
3 cooling tower 0 2
4 sheet packing machine 0.36 2
5 intermittent sheet supplier 0.36 2
6 conveyor 0.18 1
7 humidifying cabinet 7.5 1
8 cream coating machine 7.17 1
8.1 first coating machine 1.5 1
8.2 blast compressor 1.1 1
8.3 secong coating 1.5 1
9 sheet cmposite sorter 0.12 1
10 air-powered laminating machine 0.75 1
11 inlet conveyor of cold cabinet 0.75 1
12 105METER freezer 12.258 1
13 water –cooling units 1
14 Rotary saw blade cutting machine 0.93 1
15 smash machine 1

5product photo:


Company Introduction

  Our company can manufacture automatic wafer production line including tunnel baking machine, sheet packing machine, cooling tower machine, cream spreading machine, cooling cabinet, cream mixer, distribute machine and other machines, with many advantages of reliable performance, high yield, low power, convenient maintenance, easy operation, no environmental pollution, etc, and receives good reputation from our customers. 

Overseas sales

Our products not only sell well in domestic market, but also are widely exported to many countries around the world, such as Indonesia, Vietnam, the Philippines, Bangladesh, Pakistan, Uzbekistan, Jordan, Algeria, Romania, Poland, Finland, Turkey, Syria, Brazil and other countries.

 

Our sales aim is to maximize customer satisfaction and expand the company’ s brand. The equipment technical performance, quality and customer requirement will be strictly checked and managed before marketing. We have perfect after-sales service system as well as an experienced testing engineers group who can provide timely and prompt services of equipment maintenance, component replacement, and FAQ for users.

6Q&A
1.Q: Are you manufacturer?

    A: Yes, we are factory specialized in Wafer making machine production line,Chocolate coating machine,Ball wafer production line and so on.our product is characteriszed by its high quality, energy-saving and competitive price. I think it will find a market in your country.

2.Q: How do you ship the wafer machine?

   A: Usually by sea, but can also according to customer requirements. 

3.Q: Why choose us?

   A: –we are China leading snack food machinery supplier.

        1.Distinguished Made-in-china  supplier.

        2.Any inspection before shipment.

        3.Best quality & best service with competitive price. 

5. Q: Is there a variety of language options for your operating system?

    A: We use PLC controller system, Motor SWE from Germany. I thinks our products will meet your requirments. It will be great appreciated if you can come and see our workshops.

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
air-compressor

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with 2 digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between 40 percent and 80 percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China Biscuit Making Machine  China Biscuit Making Machine

China Wafer/Waffle Production Line Automatic Wafer Biscuit Making Machine

Product Description

Full-automatic wafer/waffle production line

1introduction

Full-automatic wafer production line is designed and manufactured according to the facts of domestic biscuit manufacturing industry and absorbing the most well-known wafer production lines of many oversea manufacturers, which features reliable performance,compact structure,small occupation,high yield,lower energy consumption,convenient maintenance,simple operation. 

It consists of baking oven,cooling tower,sheet picking machine,cream spreading machine,cooling cabinet,cutting machine,batter mixer,cream mixer and smash machine.

The driven motors adopt SEW Germany, the bearings use CZPT Germany. Operating system uses PLC programing to make the process automated and easy control.
 

2Production layout

3Material and parameters(Different models of the machine will have different parameters, for reference only)
1. Output: 28 pcs wafer sheets per min (based on basic wafer recipe)
2. Total power :42.41KW((380V, 50HZ)
3. Rate of finished product:≥95%
4. Gas supply pressure: 0.02-0.04 kg/cm2
5. Gas consumption:
LPG: about 27 kg/hour
Natural gas: about 38 M3 /hour
6. Air compression value: 0.9M3/Min/0.8MPA
7. Baking plate size:    470mm×325mm
8. Effective cutting size:455mm×315mm
9.Whole line dimension(L×W×H): 28.0m×2.0m×2.5m
10.Whole line weight: about 21 tons
11.Worker:4 person ( excluding packing workers)
12. Installation and Commissioning Person: 1-2 persons
143.Installation time: 2 weeks
14.Shipping Container: 2×40’HQ
15.Delivery time: 90 days upon receipt of deposit

4product photo: 

4Order Name Power(KW) Quantity
1.1 flat baking oven 165.5 1
2 sheet receiver 0.18 2
3 cooling tower 0 2
4 sheet packing machine 0.36 2
5 intermittent sheet supplier 0.36 2
6 conveyor 0.18 1
7 humidifying cabinet 7.5 1
8 cream coating machine 7.17 1
8.1 first coating machine 1.5 1
8.2 blast compressor 1.1 1
8.3 secong coating 1.5 1
9 sheet cmposite sorter 0.12 1
10 air-powered laminating machine 0.75 1
11 inlet conveyor of cold cabinet 0.75 1
12 105METER freezer 12.258 1
13 water –cooling units 1
14 Rotary saw blade cutting machine 0.93 1
15 smash machine 1

5product photo:


Company Introduction

  Our company can manufacture automatic wafer production line including tunnel baking machine, sheet packing machine, cooling tower machine, cream spreading machine, cooling cabinet, cream mixer, distribute machine and other machines, with many advantages of reliable performance, high yield, low power, convenient maintenance, easy operation, no environmental pollution, etc, and receives good reputation from our customers. 

Overseas sales

Our products not only sell well in domestic market, but also are widely exported to many countries around the world, such as Indonesia, Vietnam, the Philippines, Bangladesh, Pakistan, Uzbekistan, Jordan, Algeria, Romania, Poland, Finland, Turkey, Syria, Brazil and other countries.

 

Our sales aim is to maximize customer satisfaction and expand the company’ s brand. The equipment technical performance, quality and customer requirement will be strictly checked and managed before marketing. We have perfect after-sales service system as well as an experienced testing engineers group who can provide timely and prompt services of equipment maintenance, component replacement, and FAQ for users.

6Q&A
1.Q: Are you manufacturer?

    A: Yes, we are factory specialized in Wafer making machine production line,Chocolate coating machine,Ball wafer production line and so on.our product is characteriszed by its high quality, energy-saving and competitive price. I think it will find a market in your country.

2.Q: How do you ship the wafer machine?

   A: Usually by sea, but can also according to customer requirements. 

3.Q: Why choose us?

   A: –we are China leading snack food machinery supplier.

        1.Distinguished Made-in-china  supplier.

        2.Any inspection before shipment.

        3.Best quality & best service with competitive price. 

5. Q: Is there a variety of language options for your operating system?

    A: We use PLC controller system, Motor SWE from Germany. I thinks our products will meet your requirments. It will be great appreciated if you can come and see our workshops.

A Buyer’s Guide to Air Compressor Types

There are many types of Air Compressors, and it’s important to understand what each type has to offer. In this article, we’ll discuss single stage air compressors, low-noise compressors, and models with 2 pistons. But, before you buy an Air Compressor, be sure to read our buyer’s guide to the various types. This way, you’ll have all of the information you need to make the right decision for your business.
air-compressor

Single-stage air compressors

A single-stage air compressor is an excellent choice for most general-purpose purposes. They provide enough power to operate pneumatic tools, and they produce less heat. Single-stage air compressors, however, are not suitable for heavy-duty industrial uses. However, they can be used in various applications, including auto shops, gas stations, and various manufacturing facilities. They are also suitable for borewells and other high-pressure places.
These air compressors are a great choice for home use and are suitable for small-scale businesses, contractors, and small shops. These compressors have continuous duty cycles, cast iron compressor pumps, and a minimum 5,000-hour pump life. They also feature advanced features, including ODP motors, Auto Start & Controls, Receiver tanks, and power cords. They have low maintenance and can save you a great deal of money.
Single-stage air compressors are generally less expensive and lighter than their two-stage counterparts. Single-stage air compressors are also more portable, which is a plus for small projects. While two-stage compressors offer higher CFM, they are more powerful and bulky, making them unsuitable for small or home use. So it is essential to determine what you will use the air compressor for and decide on a model based on your needs.
A single-stage air compressor is made of a piston and a tank. The piston moves rapidly inside the cylinder and exerts pressure on the cylinder. This means that the piston can’t move any faster than the air pressure outside the cylinder. The piston is designed to operate in the same way for each stage. This is a great choice for home shops and one-man automotive shops, as it allows you to control the pressure without sacrificing the pump’s life.
Single-stage air compressors are often cheaper than two-stage versions, but they are not the best choice for every application. If you are only using your air compressor occasionally, you’ll find a one-stage model to be much more reliable than a two-stage model. The main difference between the 2 types of compressors is in the amount of air that each stage compresses. A two-stage air compressor will have more air storage capacity, but it will still produce more pressure.

Rotary vane compressors

Rotary vane compressors use a centrifugal pump to compress air. The rotor is set eccentrically in the housing, which almost touches the vane. As the rotor turns, the air that enters the pump is trapped between the vanes. This compressed air undergoes compression as the rotor rotates. Vanes are small pieces of carbon fiber or graphite composite. Vanes may be made of different materials depending on the application.
While rotary vane pumps are not commonly used to produce compressed air, they are widely used in automotive and hydraulic applications. Chances are, you have used a rotary vane pump at some point in your life. These pumps are also common in the vacuum and compressed air industries. As a result, many people don’t realize that they’re still around. They feature slots that allow the vanes to slide in and out of the rotor.
A rotary vane compressor has a drum and rotor inside. The rotor is eccentrically positioned and has slots and grooves on its surface. Its inlet and outlet ports are situated off-center, allowing the vanes to be pushed out by centrifugal force. Because the rotor rotates so quickly, air is trapped between the vanes. This air then becomes pressurized by the rotating rotor.
Rotating vane compressors can be easily serviced and repaired. A simple replacement of carbon vanes requires just 15 minutes and common tools. The carbon vanes typically last 9 to 18 months, depending on system operating pressure. Before purchasing a rotary vane compressor, make sure to check whether it has been properly performance-tested and has a warranty. Generally, warranties cover the rotor/stator chambers but do not cover the vanes or air filters. You should also check if the unit is covered by a lightning or water damage warranty.
Rotary vane compressors are an integral part of manufacturing industries. Many pharmaceutical manufacturing facilities depend on rotary vane compressors to control their equipment. Other industries that use rotary vane compressors include the plastics, woodworking, natural gas, and medical & dental fields. Their benefits are numerous and far outweigh any disadvantages of rotary screw compressors. For example, a rotary vane compressor can double the life of a conventional compressor.
air-compressor

Rotary vane compressors with low-noise models

If you are looking for a rotary vane air compressor, you have come to the right place. CZPT’s LV Series rotary vane compressors offer low-noise models, compact size, and robust integration. In addition to their low-noise features, they feature large filter systems to deliver high-quality compressed air. The LV Series models also feature CZPT’s reputation for reliability and quality.
This type of compressor uses centrifugal force to operate and is limited in its top and minimum operating speeds. They are only a third as powerful as screw compressors, and their top speed limits are much lower. Furthermore, the vanes wear out easily at high speeds because there is not enough centrifugal force to seal them against the cylinder’s edges. Even at half their full capacity, they consume as much as 80% of their total energy rating.
Because piston compressors produce a lot of noise, factory owners and shop owners have begun to install noise-dampening cabinets and other solutions. But, rotary vane compressors produce far less noise than a traditional vacuum, and the maintenance costs are also low. Rotary vane compressors are also extremely helpful in several industries. They are used in the automotive and auto finishing industries, as well as in dairy industries and milking machines.
If you have a deep pond, a rotary vane air compressor kit can pump up to 20 feet of water. This is more than enough airflow for 2 to 5 diffusers. A 1/4 HP rotary vane kit pumps around 4.2 CFM. It also helps to increase circulation and oxygen levels in the pond. Finally, a 1/4 HP kit offers the necessary power to clean up the bottom of a pond.
The rotary vane and rotary screw are the most popular air compressors today. While they are similar in many ways, they are more versatile and durable than their counterparts. They use fewer angular contact ball bearings and require less frequent maintenance than piston air compressors. Compared to piston air compressors, rotary vane and rotary screw compressors are quieter and are less expensive.
air-compressor

Rotary vane compressors with 2 pistons

The rotary vane and rotary screw compressors are similar in application, but both have different advantages and disadvantages. This article will compare the benefits of each and highlight the differences between them. While both are commonly used in industrial applications, rotary vane compressors are preferred by many industries. These compressors also have a wide range of uses, ranging from automotive air tool operation to milking machines. These compressors also have the advantage of being quieter than piston-powered ones.
The current common rail position may not be suitable for pressure swirl injectors, but new positions have been tested and show improvements in specific energy values. Moreover, the current position is not required for external oil pumps. However, mass induction and expulsion have to be performed with utmost care. This article focuses on the design and efficiency of rotary vane compressors. You can find more information about this new design in the references mentioned below.
The advantages of this type of compressor are its low cost, compact size, and easy maintenance. Hence, they are preferred in low capacity applications. Moreover, they feature integrated vanes. The rotating vanes close the air gap and compress air towards the outlet. Compared to piston-powered compressors, these units are cheaper and more reliable. Therefore, you should choose 1 with the lowest price tag. You can also opt for rotary vane compressors that are oil-free.
Sliding vane compressors are another popular variant. They have a single cylinder connected to the compressor and are capable of operating at low speeds. This design also reduces the amount of friction and maintains volumetric efficiency. However, the sliding vane compressors suffer from high frictional losses. If you are looking for a more efficient rotary compressor, this is the best option. While sliding vane compressors have been in the spotlight for over a century, they are still quite young.
These compressors are easy to install and maintain. They are also quieter than piston compressors. They are also cheaper than piston-driven compressors. The energy efficiency and low price make them the perfect choice for any commercial or industrial application. If you’re looking for a small, compact compressor, the rotary vane has been proven to be the best choice for your needs. You should know that it has a long service life.

China Wafer/Waffle Production Line Automatic Wafer Biscuit Making Machine  China Wafer/Waffle Production Line Automatic Wafer Biscuit Making Machine