Tag Archives: screw for compressor

China wholesaler Best-Selling Medium and Low Pressure Price China Single-Stage Drive Gas Screw Air Compressor air compressor for car

Product Description

Product Parameters

Model	Power(Kw)	Free air delivery(m³/min)			Weight(kg)	Size(mm)			Pipe Diamater
Model	Power(Kw)	0.3Mpa	0.4MPa	0.5MPa	Weight(kg)	Length	Width	Height	Pipe Diamater
MQ37A/3	37	11.88	/	/	1170	2100	1250	1730	DN65
MQ37A/4	37	/	10.5	/	1170	2100	1250	1730	DN65
MQ37A/5	37	/	/	9.2	1170	2100	1250	1730	DN65
MQ45A/3	45	14	/	/	1185	2600	1650	2050	DN100
MQ45A/4	45	/	12.5	/	1185	2100	1250	1730	DN65
MQ45A/5	45	/	/	10.32	1185	2100	1250	1730	DN65
MQ55A/3	55	17.66	/	/	1185	2600	1650	2050	DN100
MQ55A/4	55	/	15.27	/	1185	2600	1500	1900	DN80
MQ55A/5	55	/	/	14.13	1185	2600	1500	1900	DN80
MQ75A/3	75	23.64	/	/	2280	2600	1650	2050	DN100
MQ75A/4	75	/	20.19	/	2280	2600	1500	1900	DN80
MQ75A/5	75	/	/	18.4	2280	2600	1500	1900	DN80
MQ90A/3	90	29.63	/	/	3000	2900	1880	2080	DN100
MQ90A/4	90	/	24	/	3000	2700	1630	2100	DN125
MQ90A/5	90	/	/	21.25	3000	2700	1630	1900	DN80
MQ110A/3	110	35.77	/	/	3160	3000	2000	2280	DN125
MQ110A/4	110	/	29.69	/	3160	3000	2000	2280	DN125
MQ110A/5	110	/	/	28	3160	3000	2000	2280	DN125
MQ132A/3	132	40.27	/	/	4640	3000	2000	2280	DN125
MQ132A/4	132	/	35.62	/	4640	3000	2000	2280	DN125
MQ132A/5	132	/	/	30.5	4640	3000	2000	2280	DN125
MQ160A/3	160	50.1	/	/	4900	3600	2200	2280	DN150
MQ160A/4	160	/	47	/	4900	3600	2200	2280	DN150
MQ160A/5	160	/	/	42	4900	3600	2200	2280	DN150
MQ185A/3	185	61	/	/	5600	3800	2300	2400	DN150
MQ185A/4	185	/	50	/	5600	3800	2300	2400	DN150
MQ185A/5	185	/	/	45	5600	3800	2300	2400	DN150
MQ200A/3	200	63	/	/	5850	3800	2300	2400	DN150
MQ200A/4	200	/	57	/	5850	3800	2300	2400	DN150
MQ200A/5	200	/	/	51.5	5850	3800	2300	2400	DN150
MQ220A/3	220	65	/	/	6600	4000	2400	2600	DN200
MQ220A/4	220	/	62	/	6600	4000	2400	2600	DN200
MQ220A/5	220	/	/	55	6600	4000	2400	2600	DN200
MQ250A/3	250	67.5	/	/	6900	4000	2400	2600	DN200
MQ250A/4	250	/	65	/	6900	4000	2400	2600	DN200
MQ250A/5	250	/	/	61	6900	4000	2400	2600	DN200

Installation Instructions

Operation Instructions:
A:Before Operation:

Confirm the voltage of the power supply and the power indicator light is lit.
Please open the leak valve of the oil & gas tank, drain the condensed water and immediately close the leak valve when oil leaks out.
Please check the oil level and keep it between indicator oil level.
Water cooled system , confirm that cooling water supply is normal.
When generator driving the belt, please check the belt tension correctly, not too loose or too tight.

B:Start up

Main power switch in.
Press the start button to turn on the motor, working indicator light is on.
Check the discharge pressure gauge and lubricating oil pressure gauge are in correct indication.

C:Operation
Please keep the exhaust temperature between 75ºC-95ºC to avoid condensation and precipitation and emulsify the oil.
D:Stop

Press the “off” button, about 10-15 seconds later, the delay electromagnetic valve acts, and the compressor stops running.
Turn off the power.
Don’t use the emergency stop button in case of non emergency.

E: Precautions:

For initial start-up and after motor maintenance, determine the running direction of the press (as indicated by the arrow).
Do not mix different brand of river lubricating oil.
Change the consumables, lubricating oil and detail operation method, please refer the instruction manual.

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

air compressor

Can Gas Air Compressors Be Used for Well Drilling?

Gas air compressors can be used for well drilling, and they are commonly employed in drilling operations. Here’s a detailed explanation:

1. Air Drilling Method:

Gas air compressors are often utilized in the air drilling method, also known as pneumatic drilling. In this drilling technique, compressed air is used to create a high-velocity airflow that carries the drill cuttings to the surface. The high-pressure air also aids in cooling the drill bit and providing additional force for efficient drilling.

2. Benefits of Gas Air Compressors:

Gas air compressors offer several advantages for well drilling:

Portability: Gas air compressors can be easily transported to remote drilling sites, allowing for flexibility in well location.
Power: Gas air compressors provide high-pressure air output, which is essential for effective drilling in various geological formations.
Cost-Effectiveness: Gas air compressors can be more cost-effective compared to other drilling methods, as they eliminate the need for drilling mud and associated disposal costs.
Environmental Considerations: Air drilling with gas compressors produces minimal waste and does not require the use of potentially harmful drilling fluids, making it an environmentally friendly option.

3. Compressor Selection:

When selecting a gas air compressor for well drilling, several factors should be considered:

Pressure and Flow Requirements: Evaluate the pressure and flow requirements of the drilling operation to ensure that the gas air compressor can deliver the necessary air output.
Compressor Size and Power: Choose a compressor with adequate size and power output to match the drilling demands. Factors such as borehole depth, drill bit type, and drilling speed will influence the compressor’s power requirements.
Portability: Consider the portability features of the gas air compressor, such as its weight, dimensions, and mobility options, to facilitate transportation to drilling sites.

4. Safety Considerations:

It is essential to follow safety guidelines when using gas air compressors for well drilling. These may include proper ventilation to prevent the accumulation of exhaust fumes, adherence to equipment operating limits, and the use of personal protective equipment (PPE) for drilling personnel.

5. Other Considerations:

While gas air compressors are commonly used for well drilling, it is worth noting that the suitability of a gas air compressor for a specific drilling project depends on various factors such as geological conditions, well depth, and drilling objectives. It is recommended to consult with drilling experts and professionals to determine the most suitable drilling method and equipment for a particular project.

In summary, gas air compressors can be effectively used for well drilling, particularly in the air drilling method. They offer portability, power, cost-effectiveness, and environmental advantages. Proper selection, considering pressure and flow requirements, as well as safety precautions, is crucial to ensure successful and safe drilling operations.

air compressor

Can Gas Air Compressors Be Used for Pneumatic Tools?

Yes, gas air compressors can be used for pneumatic tools. Here’s a detailed explanation:

1. Versatile Power Source:

Gas air compressors, powered by gasoline or diesel engines, provide a portable and versatile power source for operating pneumatic tools. They eliminate the need for electrical power supply, making them suitable for remote locations or construction sites where electricity may not be readily available.

2. High Power Output:

Gas air compressors typically offer higher power output compared to electric compressors of similar size. This high power output enables gas compressors to deliver the necessary air pressure and volume required by pneumatic tools, ensuring optimal tool performance.

3. Mobility and Portability:

Gas air compressors are often designed with mobility and portability in mind. They are compact and equipped with wheels or handles, allowing for easy transportation to different job sites. This mobility is advantageous when using pneumatic tools in various locations or when working in confined spaces.

4. Continuous Operation:

Gas air compressors can provide continuous air supply for pneumatic tools without the need for frequent pauses or recharging. As long as there is an adequate fuel supply, gas compressors can operate for extended periods, allowing uninterrupted use of pneumatic tools for tasks such as drilling, nailing, sanding, or painting.

5. Suitable for High-Demand Applications:

Pneumatic tools used in heavy-duty applications often require a robust air supply to meet their performance requirements. Gas air compressors can generate higher air flow rates and maintain higher operating pressures, making them suitable for high-demand pneumatic tools like jackhammers, impact wrenches, or sandblasters.

6. Flexibility in Compressor Size:

Gas air compressors are available in various sizes and capacities, allowing users to choose the compressor that best matches the air demands of their pneumatic tools. From small portable compressors for light-duty tasks to larger industrial-grade compressors for heavy-duty applications, there is a wide range of options to suit different tool requirements.

7. Reduced Dependency on Electrical Infrastructure:

Using gas air compressors for pneumatic tools reduces reliance on electrical infrastructure. In situations where the electrical power supply is limited, unreliable, or expensive, gas compressors offer a viable alternative, ensuring consistent tool performance without concerns about power availability.

It’s important to note that gas air compressors emit exhaust gases during operation, so proper ventilation is necessary when using them in enclosed spaces to ensure the safety of workers.

In summary, gas air compressors can effectively power pneumatic tools, offering mobility, high power output, continuous operation, and suitability for various applications. They provide a reliable and portable solution for utilizing pneumatic tools in locations where electrical power supply may be limited or unavailable.

air compressor

What Industries Commonly Use Gas Air Compressors?

Gas air compressors find applications in various industries where compressed air is required for powering tools, equipment, and systems. These compressors are valued for their portability, versatility, and ability to provide high-pressure air. Here’s a detailed explanation of the industries that commonly use gas air compressors:

1. Construction Industry:

The construction industry extensively utilizes gas air compressors for a wide range of tasks. Compressed air is used to power pneumatic tools such as jackhammers, nail guns, impact wrenches, and concrete breakers. Gas air compressors provide the necessary airflow and pressure to operate these tools efficiently, making them ideal for construction sites.

2. Mining Industry:

In the mining industry, gas air compressors play a vital role in various operations. Compressed air is used to power pneumatic tools for drilling, rock blasting, and excavation. It is also employed in ventilation systems, conveying systems, and pneumatic control devices in mines. Gas air compressors are valued for their durability and ability to operate in rugged and remote mining environments.

3. Oil and Gas Industry:

The oil and gas industry relies on gas air compressors for numerous applications. They are used for well drilling operations, powering pneumatic tools, and maintaining pressure in oil and gas pipelines. Gas air compressors are also utilized in natural gas processing plants, refineries, and petrochemical facilities for various pneumatic processes and equipment.

4. Manufacturing and Industrial Sector:

In the manufacturing and industrial sector, gas air compressors are extensively used in different applications. They provide compressed air for pneumatic tools, such as air-powered drills, sanders, grinders, and spray guns. Compressed air is also used in manufacturing processes such as material handling, assembly line operations, and pneumatic control systems.

5. Automotive Industry:

The automotive industry utilizes gas air compressors for a variety of tasks. Compressed air is employed in automotive assembly plants for pneumatic tools, paint spraying booths, and pneumatic control systems. Gas air compressors are also used in auto repair shops for powering air tools, tire inflation, and operating pneumatic lifts.

6. Agriculture and Farming:

Gas air compressors have applications in the agriculture and farming sector. They are used for tasks such as powering pneumatic tools for crop irrigation, operating pneumatic seeders or planters, and providing compressed air for farm maintenance and repair work. Portable gas air compressors are particularly useful in agricultural settings where electricity may not be readily available.

7. Food and Beverage Industry:

In the food and beverage industry, gas air compressors are employed for various pneumatic processes and equipment. They are used in food packaging operations, pneumatic conveying systems for ingredients and finished products, and air-powered mixing and blending processes. Gas air compressors in this industry are designed to meet strict hygiene and safety standards.

8. Pharmaceutical and Healthcare Sector:

The pharmaceutical and healthcare sector utilizes gas air compressors for critical applications. Compressed air is used in medical devices, dental equipment, laboratory instruments, and pharmaceutical manufacturing processes. Gas air compressors in this industry must adhere to stringent quality standards and maintain air purity.

These are just a few examples of the industries that commonly use gas air compressors. Other sectors, such as power generation, aerospace, marine, and chemical industries, also rely on gas air compressors for specific applications. The versatility and reliability of gas air compressors make them indispensable in numerous industries where compressed air is a vital resource.

<img src="https://img.hzpt.com/img/air-compressor/air-compressor-L1.webp" alt="China wholesaler Best-Selling Medium and Low Pressure Price China Single-Stage Drive Gas Screw Air Compressor air compressor for car”><img src="https://img.hzpt.com/img/air-compressor/air-compressor-L2.webp" alt="China wholesaler Best-Selling Medium and Low Pressure Price China Single-Stage Drive Gas Screw Air Compressor air compressor for car”>
editor by lmc 2024-10-21

China Hot selling 183cfm 102-145psi 10bar Shanghai Professional Best Air Screw Compressors Maker for Urban Construction air compressor portable

Product Description

ZIQI CHINAMFG Screw Air Compressor Advantages:

A.80% components of CHINAMFG Compressor adopt global well known reliable brand to make sure the air compressor with high quality,durable,energy saving:
1.Core part:Germany GHH RAND screw air end ;
2.Motor:adopt Brazil WEG brand,the second biggest motor manufacturer in the world,IE4 energy saving standard 3 phase induction motor,IP55 protection;
3.Italian EURE oil air vessel ,the lead pressure vessel manufacturer in the world;
4.Italian Manuli oil tube ;
5.French Schneider electric system;
6.Sweden CHINAMFG bearings

Energy saving:
The air compressor equiped the frequency inverter,to make the air compressor with variable speed drive [VSD].The principle of VSD is to adjust the motor rotation speed automatically according to the actual air consumption. The reduced system pressure decreases the total energy consumption of the whole system, which can reduce energy costs by 35% or more.

Technical Parameter

Model	Air pressure			Max air displacement		Motor power		transmission	dimension			Weight	Noise	Outlet
								cooling type
	mpa	bar(e)	psi(g)	m3/min	cfm	hp	kw	belt drive & air cooling	L(mm)	W(mm)	H(mm)	Kgs	dB(A)	mm
GA-3.7A	0.7	7	102	0.55	19	5	3.7		680	660	780	220	60±2	20
	0.8	8	116	0.45	16
	1	10	145	0.35	12
GA-5.5A	0.7	7	102	0.8	28	7	5.5		680	660	780	230	61±2	20
	0.8	8	116	0.7	25
	1	10	145	0.6	21
	1.3	13	189	0.5	18
GAS-7.5A VFC	0.7	7	102	1.3	46	10	7.5		950	650	915	270	62±2	20
	0.8	8	116	1.2	42
	1	10	145	1.1	39
	1.3	13	189	0.9	32
GAS-11A VFC	0.7	7	102	1.8	64	15	11		950	650	915	280	63±2	20
	0.8	8	116	1.7	60
	1	10	145	1.5	53
	1.3	13	189	1.2	42
GAS-15A VFC	0.7	7	102	2.7	95	20	15		1260	850	1220	540	66±2	25
	0.8	8	116	2.5	88
	1	10	145	2.3	81
	1.3	13	189	2	71
GAS-18.5A VFC	0.7	7	102	3.2	113	25	18.5		1260	850	1220	550	67±2	25
	0.8	8	116	3	106
	1	10	145	2.8	99
	1.3	13	189	2.4	85
GAS-22A VFC	0.7	7	102	3.8	134	30	22		1260	850	1220	560	67±2	25
	0.8	8	116	3.6	127
	1	10	145	3.2	113
	1.3	13	189	2.8	99
GAS-30A VFC	0.7	7	102	5.7	201	40	30		1500	970	1375	780	67±2	40
	0.8	8	116	5.5	194
	1	10	145	5	177
	1.3	13	189	4.5	159
GAS-37A VFC	0.7	7	102	6.8	240	50	37		1500	970	1375	800	68±2	40
	0.8	8	116	6.31	222
	1	10	145	5.7	201
	1.3	13	189	5	177
GAS-45A VFC	0.7	7	102	7.9	279	60	45		1500	970	1375	820	69±2	40
	0.8	8	116	7.4	261
	1	10	145	6.9	244
	1.3	13	189	6.1	215
GAS-55A VFC	0.7	7	102	10.9	385	75	55	direct drive &air cooling or water cooling	2150	1326	1766	1550	69±2	50
	0.8	8	116	10.4	367
	1	10	145	9.4	332
	1.3	13	189	8.6	304
GAS-75A VFC	0.7	7	102	14.5	512	100	75		2150	1326	1766	1600	70±2	50
	0.8	8	116	13.8	487
	1	10	145	12.6	445
	1.3	13	189	11.2	395
GAS-90A VFC	0.7	7	102	17	600	120	90		2545	1450	1900	2500	75±2	65
	0.8	8	116	16.5	583
	1	10	145	15.2	537
	1.3	13	189	14	494

*For other requirements,please contact the salesman.

Company Information

Packaging & Shipping

FAQ

Are you manufacturer?
ZIQI: Yes,we are professional air compressor manufacturer over 10 years and our factory located in ZheJiang .
How long is your air compressor warranty?
ZIQI: For 1 year.
Do you provide After- sales service parts?
ZIQI: Of course, We could provide easy- consumable spares.
How long could your air compressor be used?
ZIQI: Generally, more than 10 years.
How about your price?
ZIQI: Based on high quality, Our price is very competitive in this market all over the world.
How about your customer service?
ZIQI: For email, we could reply our customers’ emails within 2 hours.
Do you support OEM?
ZIQI: YES, and we also provide multiple models to select.

How to get quicker quotation?

When you send us inquiry, please confirm below information at the same time:
* What is the air displacement (m3/min,cfm/min)?
* What is the air pressure (mpa,bar,psi)?
* What is the voltage in your factory (v/p/Hz)?
* It is ok if you need air tank, air dryer and filters.
This information is helpful for us to check suitable equipment solution and quotation quickly.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online Support
Warranty:	2 Years
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

What Is the Noise Level of Gas Air Compressors?

The noise level of gas air compressors can vary depending on several factors, including the compressor’s design, engine type, operating conditions, and the presence of noise-reducing features. Here’s a detailed explanation:

1. Compressor Design:

The design of the gas air compressor can influence its noise level. Some compressors are engineered with noise reduction in mind, utilizing features such as sound insulation, vibration dampening materials, and mufflers to minimize noise generation. Compressors with enclosed cabinets or acoustic enclosures tend to have lower noise levels compared to open-frame compressors.

2. Engine Type:

The type of engine used in the gas air compressor can impact the noise level. Gas air compressors typically use internal combustion engines powered by gasoline or propane. Gasoline engines tend to produce higher noise levels compared to diesel engines or electric motors. However, advancements in engine technology have led to quieter gasoline engines with improved noise control.

3. Operating Conditions:

The operating conditions of the gas air compressor can affect the noise level. Factors such as the load capacity, speed of operation, and ambient temperature can influence the amount of noise generated. Compressors operating at higher loads or speeds may produce more noise compared to those running at lower levels.

4. Noise-Reducing Features:

Some gas air compressors are equipped with noise-reducing features to minimize sound emissions. These may include built-in silencers, acoustic enclosures, or noise-absorbing materials. Such features help dampen the noise produced by the compressor and reduce its overall noise level.

5. Manufacturer Specifications:

Manufacturers often provide noise level specifications for their gas air compressors. These specifications typically indicate the sound pressure level (SPL) in decibels (dB) at a specific distance from the compressor. It is important to refer to these specifications to get an idea of the expected noise level of a particular compressor model.

6. Distance and Location:

The distance between the gas air compressor and the listener can impact the perceived noise level. As sound waves disperse, the noise level decreases with distance. Locating the compressor in an area that is isolated or distant from occupied spaces can help minimize the impact of noise on the surrounding environment.

It is important to note that gas air compressors, especially those used in industrial or heavy-duty applications, can generate substantial noise levels. Occupational health and safety regulations may require the use of hearing protection for individuals working in close proximity to loud compressors.

Overall, the noise level of gas air compressors can vary, and it is advisable to consult the manufacturer’s specifications and consider noise-reducing features when selecting a compressor. Proper maintenance, such as regular lubrication and inspection of components, can also help minimize noise levels and ensure optimal performance.

air compressor

Can Gas Air Compressors Be Used for Gas Line Maintenance?

Gas air compressors can be used for certain aspects of gas line maintenance, primarily for tasks that require compressed air. Here’s a detailed explanation:

1. Clearing Debris and Cleaning:

Gas air compressors can be utilized to clear debris and clean gas lines. Compressed air can be directed through the gas lines to dislodge and remove dirt, dust, rust particles, or other contaminants that may accumulate over time. This helps maintain the integrity and efficiency of the gas lines.

2. Pressure Testing:

Gas line maintenance often involves pressure testing to ensure the lines can withstand the required operating pressures. Gas air compressors can provide the necessary compressed air to pressurize the lines for testing purposes. By pressurizing the gas lines with compressed air, technicians can identify any leaks or weaknesses in the system.

3. Leak Detection:

Gas air compressors can also be used in conjunction with appropriate leak detection equipment to identify and locate gas leaks in the gas lines. Compressed air can be introduced into the lines, and the detection equipment can then identify any areas where the compressed air escapes, indicating a potential gas leak.

4. Valve and Equipment Maintenance:

Gas line maintenance may involve the inspection, maintenance, or replacement of valves and associated equipment. Compressed air can be used to clean and blow out debris from valves, purge lines, or assist in the disassembly and reassembly of components.

5. Pipe Drying:

Gas air compressors can aid in drying gas lines after maintenance or repairs. By blowing compressed air through the lines, any residual moisture can be removed, ensuring the gas lines are dry before being put back into service.

6. Precautions and Regulations:

When using gas air compressors for gas line maintenance, it is essential to follow safety precautions and adhere to relevant regulations. Gas line maintenance often involves working in hazardous environments, and proper training, equipment, and procedures must be followed to ensure the safety of personnel and the integrity of the gas system.

It is important to note that gas air compressors should not be used directly for pressurizing or transporting natural gas or other combustible gases. Gas line maintenance tasks involving gas air compressors primarily focus on using compressed air for specific maintenance and testing purposes, as outlined above.

In summary, gas air compressors can be useful for certain aspects of gas line maintenance, including clearing debris, pressure testing, leak detection, valve and equipment maintenance, and pipe drying. However, it is crucial to follow safety guidelines and regulations when working with gas lines and compressed air to ensure the safety and integrity of the gas system.

air compressor

What Are the Advantages of Using a Gas Air Compressor Over an Electric One?

Using a gas air compressor offers several advantages over an electric air compressor. Gas-powered compressors provide unique benefits in terms of mobility, versatility, power, and convenience. Here’s a detailed explanation of the advantages of using a gas air compressor:

1. Portability and Mobility:

Gas air compressors are typically more portable and mobile compared to electric compressors. They often feature handles, wheels, or trailers, allowing for easy transportation to different locations. This portability is especially advantageous in situations where compressed air is needed at remote job sites, outdoor events, or areas without access to electricity. Gas air compressors can be easily moved and positioned where they are required.

2. Independence from Electricity:

One of the primary advantages of gas air compressors is their independence from electricity. They are powered by gas engines, which means they do not rely on a direct connection to the electrical grid. This makes them suitable for use in areas where electrical power is limited, unreliable, or unavailable. Gas air compressors offer a reliable source of compressed air even in remote locations or during power outages.

3. Versatility in Fuel Options:

Gas air compressors provide versatility in terms of fuel options. They can be powered by various types of combustible gases, including gasoline, diesel, natural gas, or propane. This flexibility allows users to choose the most readily available or cost-effective fuel source based on their specific requirements. It also makes gas compressors adaptable to different environments and fuel availability in various regions.

4. Higher Power Output:

Gas air compressors typically offer higher power output compared to electric compressors. Gas engines can generate more horsepower, allowing gas compressors to deliver greater air pressure and volume. This higher power output is beneficial when operating pneumatic tools or equipment that require a significant amount of compressed air, such as jackhammers, sandblasters, or heavy-duty impact wrenches.

5. Continuous Operation:

Gas air compressors can provide continuous operation without the need for frequent breaks or cooldown periods. Electric compressors may overheat with prolonged use, requiring intermittent rest periods to cool down. Gas compressors, on the other hand, can operate continuously for longer durations without the risk of overheating. This continuous operation capability is particularly advantageous in demanding applications or situations that require extended periods of compressed air usage.

6. Quick Startup and Response:

Gas air compressors offer quick startup and response times. They can be started instantly by simply pulling a cord or pressing a button, whereas electric compressors may require time to power up and reach optimal operating conditions. Gas compressors provide immediate access to compressed air, allowing for efficient and prompt task completion.

7. Durability and Resistance to Voltage Fluctuations:

Gas air compressors are generally more durable and resistant to voltage fluctuations compared to electric compressors. Electric compressors can be affected by voltage drops or surges, which may impact their performance or cause damage. Gas compressors, however, are less susceptible to voltage-related issues, making them reliable in environments where voltage fluctuations are common.

8. Lower Energy Costs:

Gas air compressors can offer lower energy costs compared to electric compressors, depending on the price of the fuel being used. Gasoline or diesel fuel, for example, may be more cost-effective than electricity in certain regions or applications. This cost advantage can result in significant savings over time, especially for high-demand compressed air operations.

Overall, the advantages of using a gas air compressor over an electric one include portability, independence from electricity, fuel versatility, higher power output, continuous operation capability, quick startup and response times, durability, resistance to voltage fluctuations, and potentially lower energy costs. These advantages make gas air compressors a preferred choice in various industries, remote locations, and applications where mobility, power, and reliability are crucial.

China Hot selling 183cfm 102-145psi 10bar Shanghai Professional Best Air Screw Compressors Maker for Urban Construction air compressor portable
editor by CX 2024-05-03

China Hot selling 30kw 7-13bar 380V 41HP AC Power Single-Stage Belt Drive Three Phase Energy Saving Screw Air Compressor for Industrial air compressor for sale

Product Description

ZIQI CHINAMFG Screw Air Compressor Advantages:

Technical Parameter

Model	Air pressure			Max air displacement		Motor power		transmission	dimension			Weight	Noise	Outlet
								cooling type
	mpa	bar(e)	psi(g)	m3/min	cfm	hp	kw	belt drive & air cooling	L(mm)	W(mm)	H(mm)	Kgs	dB(A)	mm
GA-3.7A	0.7	7	102	0.55	19	5	3.7		680	660	780	220	60±2	20
	0.8	8	116	0.45	16
	1	10	145	0.35	12
GA-5.5A	0.7	7	102	0.8	28	7	5.5		680	660	780	230	61±2	20
	0.8	8	116	0.7	25
	1	10	145	0.6	21
	1.3	13	189	0.5	18
GAS-7.5A VFC	0.7	7	102	1.3	46	10	7.5		950	650	915	270	62±2	20
	0.8	8	116	1.2	42
	1	10	145	1.1	39
	1.3	13	189	0.9	32
GAS-11A VFC	0.7	7	102	1.8	64	15	11		950	650	915	280	63±2	20
	0.8	8	116	1.7	60
	1	10	145	1.5	53
	1.3	13	189	1.2	42
GAS-15A VFC	0.7	7	102	2.7	95	20	15		1260	850	1220	540	66±2	25
	0.8	8	116	2.5	88
	1	10	145	2.3	81
	1.3	13	189	2	71
GAS-18.5A VFC	0.7	7	102	3.2	113	25	18.5		1260	850	1220	550	67±2	25
	0.8	8	116	3	106
	1	10	145	2.8	99
	1.3	13	189	2.4	85
GAS-22A VFC	0.7	7	102	3.8	134	30	22		1260	850	1220	560	67±2	25
	0.8	8	116	3.6	127
	1	10	145	3.2	113
	1.3	13	189	2.8	99
GAS-30A VFC	0.7	7	102	5.7	201	40	30		1500	970	1375	780	67±2	40
	0.8	8	116	5.5	194
	1	10	145	5	177
	1.3	13	189	4.5	159
GAS-37A VFC	0.7	7	102	6.8	240	50	37		1500	970	1375	800	68±2	40
	0.8	8	116	6.31	222
	1	10	145	5.7	201
	1.3	13	189	5	177
GAS-45A VFC	0.7	7	102	7.9	279	60	45		1500	970	1375	820	69±2	40
	0.8	8	116	7.4	261
	1	10	145	6.9	244
	1.3	13	189	6.1	215
GAS-55A VFC	0.7	7	102	10.9	385	75	55	direct drive &air cooling or water cooling	2150	1326	1766	1550	69±2	50
	0.8	8	116	10.4	367
	1	10	145	9.4	332
	1.3	13	189	8.6	304
GAS-75A VFC	0.7	7	102	14.5	512	100	75		2150	1326	1766	1600	70±2	50
	0.8	8	116	13.8	487
	1	10	145	12.6	445
	1.3	13	189	11.2	395
GAS-90A VFC	0.7	7	102	17	600	120	90		2545	1450	1900	2500	75±2	65
	0.8	8	116	16.5	583
	1	10	145	15.2	537
	1.3	13	189	14	494

*For other requirements,please contact the salesman.

Company Information

Packaging & Shipping

FAQ

How to get quicker quotation?

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online Support
Warranty:	2 Years
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

How Do Gas Air Compressors Compare to Diesel Air Compressors?

When comparing gas air compressors to diesel air compressors, there are several factors to consider, including fuel efficiency, power output, cost, maintenance requirements, and environmental impact. Here’s a detailed explanation of how these two types of air compressors compare:

1. Fuel Efficiency:

Diesel air compressors are generally more fuel-efficient compared to gas air compressors. Diesel engines have higher energy density and better overall efficiency than gasoline engines. This means that diesel compressors can produce more work output per unit of fuel consumed, resulting in lower fuel costs and longer runtimes between refueling.

2. Power Output:

Diesel air compressors typically provide higher power output compared to gas air compressors. Diesel engines are known for their robustness and ability to generate higher torque, making them suitable for heavy-duty applications that require a larger volume of compressed air or higher operating pressures.

3. Cost:

In terms of upfront cost, gas air compressors are generally more affordable compared to diesel air compressors. Gasoline engines and components are typically less expensive than their diesel counterparts. However, it’s important to consider long-term costs, including fuel expenses and maintenance, which can vary depending on factors such as fuel prices and usage patterns.

4. Maintenance Requirements:

Diesel air compressors often require more regular maintenance compared to gas air compressors. This is because diesel engines have additional components such as fuel filters, water separators, and injector systems that need periodic servicing. Gas air compressors, on the other hand, may have simpler maintenance requirements, resulting in reduced maintenance costs and time.

5. Environmental Impact:

When it comes to environmental impact, diesel air compressors produce higher emissions compared to gas air compressors. Diesel engines emit more particulate matter, nitrogen oxides (NOx), and carbon dioxide (CO2) compared to gasoline engines. Gas air compressors, especially those powered by propane, tend to have lower emissions and are considered more environmentally friendly.

6. Portability and Mobility:

Gas air compressors are generally more portable and easier to move compared to diesel air compressors. Gasoline engines are typically lighter and more compact, making gas air compressors suitable for applications where mobility is essential, such as construction sites or remote locations.

It’s important to note that the specific requirements of the application and the availability of fuel sources also play a significant role in choosing between gas air compressors and diesel air compressors. Each type has its own advantages and considerations, and the choice should be based on factors such as the intended usage, operating conditions, budget, and environmental considerations.

In conclusion, gas air compressors are often more affordable, portable, and suitable for lighter applications, while diesel air compressors offer higher power output, fuel efficiency, and durability for heavy-duty operations. Consider the specific needs and factors mentioned above to determine the most appropriate choice for your particular application.

air compressor

How Do Gas Air Compressors Contribute to Energy Savings?

Gas air compressors can contribute to energy savings in several ways. Here’s a detailed explanation:

1. Efficient Power Source:

Gas air compressors are often powered by gasoline or diesel engines. Compared to electric compressors, gas-powered compressors can provide higher power output for a given size, resulting in more efficient compression of air. This efficiency can lead to energy savings, especially in applications where a significant amount of compressed air is required.

2. Reduced Electricity Consumption:

Gas air compressors, as standalone units that don’t rely on electrical power, can help reduce electricity consumption. In situations where the availability of electricity is limited or expensive, using gas air compressors can be a cost-effective alternative. By utilizing fuel-based power sources, gas air compressors can operate independently from the electrical grid and reduce dependence on electricity.

3. Demand-Sensitive Operation:

Gas air compressors can be designed to operate on demand, meaning they start and stop automatically based on the air requirements. This feature helps prevent unnecessary energy consumption during periods of low or no compressed air demand. By avoiding continuous operation, gas air compressors can optimize energy usage and contribute to energy savings.

4. Energy Recovery:

Some gas air compressors are equipped with energy recovery systems. These systems capture and utilize the heat generated during the compression process, which would otherwise be wasted. The recovered heat can be redirected and used for various purposes, such as space heating, water heating, or preheating compressed air. This energy recovery capability improves overall energy efficiency and reduces energy waste.

5. Proper Sizing and System Design:

Selecting the appropriate size and capacity of a gas air compressor is crucial for energy savings. Over-sizing a compressor can lead to excessive energy consumption, while under-sizing can result in inefficient operation and increased energy usage. Properly sizing the compressor based on the specific air demands ensures optimal efficiency and energy savings.

6. Regular Maintenance:

Maintaining gas air compressors in good working condition is essential for energy efficiency. Regular maintenance, including cleaning or replacing air filters, checking and repairing leaks, and ensuring proper lubrication, helps optimize compressor performance. Well-maintained compressors operate more efficiently, consume less energy, and contribute to energy savings.

7. System Optimization:

For larger compressed air systems that involve multiple compressors, implementing system optimization strategies can further enhance energy savings. This may include employing advanced control systems, such as variable speed drives or sequencers, to match compressed air supply with demand, minimizing unnecessary energy usage.

In summary, gas air compressors contribute to energy savings through their efficient power sources, reduced electricity consumption, demand-sensitive operation, energy recovery systems, proper sizing and system design, regular maintenance, and system optimization measures. By utilizing gas-powered compressors and implementing energy-efficient practices, businesses and industries can achieve significant energy savings in their compressed air systems.

air compressor

What Are the Primary Applications of Gas Air Compressors?

Gas air compressors have a wide range of applications across various industries and activities. These compressors, powered by gas engines, provide a portable and versatile source of compressed air. Here’s a detailed explanation of the primary applications of gas air compressors:

1. Construction Industry:

Gas air compressors are extensively used in the construction industry. They power a variety of pneumatic tools and equipment, such as jackhammers, nail guns, impact wrenches, and concrete breakers. The portable nature of gas air compressors makes them ideal for construction sites where electricity may not be readily available or practical to use.

2. Agriculture and Farming:

Gas air compressors find applications in the agricultural sector. They are used to operate air-powered machinery and tools, including pneumatic seeders, sprayers, and agricultural pumps. Gas air compressors provide the necessary power to carry out tasks such as crop seeding, irrigation, and pest control in agricultural settings.

3. Recreational Activities:

Gas air compressors are commonly utilized in recreational activities. They are used to inflate tires, sports balls, inflatable structures, and recreational equipment such as air mattresses, rafts, and inflatable toys. Gas air compressors provide a convenient and portable solution for inflating various recreational items in outdoor settings.

4. Mobile Service Operations:

Gas air compressors are employed in mobile service operations, such as mobile mechanics, tire service providers, and mobile equipment repair services. These compressors power air tools and equipment required for on-site repairs, maintenance, and servicing of vehicles, machinery, and equipment. The mobility of gas air compressors allows service providers to bring their tools and compressed air source directly to the location of the service requirement.

5. Remote Job Sites:

Gas air compressors are well-suited for remote job sites or locations without access to electricity. They are commonly used in industries such as mining, oil and gas exploration, and remote construction projects. Gas air compressors power pneumatic tools, machinery, and drilling equipment in these environments, providing a reliable source of compressed air for operational needs.

6. Emergency and Backup Power:

In emergency situations or during power outages, gas air compressors can serve as a backup power source. They can power essential equipment and systems that rely on compressed air, such as emergency lighting, communication devices, medical equipment, and backup generators. Gas air compressors provide a reliable alternative power solution when electrical power is unavailable or unreliable.

7. Sandblasting and Surface Preparation:

Gas air compressors are used in sandblasting and surface preparation applications. They provide the high-pressure air necessary for propelling abrasive media, such as sand or grit, to remove paint, rust, or other coatings from surfaces. Gas air compressors offer the power and portability required for sandblasting operations in various industries, including automotive, metal fabrication, and industrial maintenance.

8. Off-Road and Outdoor Equipment:

Gas air compressors are commonly integrated into off-road and outdoor equipment, such as off-road vehicles, utility trucks, and recreational vehicles. They power air-operated systems, including air suspension systems, air brakes, air lockers, and air horns. Gas air compressors provide the necessary compressed air for reliable and efficient operation of these systems in rugged and outdoor environments.

Overall, gas air compressors have diverse applications in construction, agriculture, recreational activities, mobile service operations, remote job sites, emergency power backup, sandblasting, and various off-road and outdoor equipment. Their portability, versatility, and reliable power supply make them indispensable tools in numerous industries and activities.

China Hot selling 30kw 7-13bar 380V 41HP AC Power Single-Stage Belt Drive Three Phase Energy Saving Screw Air Compressor for Industrial air compressor for sale
editor by CX 2024-04-27

China Best Sales 55kw/75HP Direct Drive Screw Air Compressor Wholesale for Industry small air compressor

Product Description

ZIQI CHINAMFG Screw Air Compressor Advantages:

Technical Parameter

Model	Air pressure			Max air displacement		Motor power		transmission	dimension			Weight	Noise	Outlet
								cooling type
	mpa	bar(e)	psi(g)	m3/min	cfm	hp	kw	belt drive & air cooling	L(mm)	W(mm)	H(mm)	Kgs	dB(A)	mm
GA-3.7A	0.7	7	102	0.55	19	5	3.7		680	660	780	220	60±2	20
	0.8	8	116	0.45	16
	1	10	145	0.35	12
GA-5.5A	0.7	7	102	0.8	28	7	5.5		680	660	780	230	61±2	20
	0.8	8	116	0.7	25
	1	10	145	0.6	21
	1.3	13	189	0.5	18
GAS-7.5A VFC	0.7	7	102	1.3	46	10	7.5		950	650	915	270	62±2	20
	0.8	8	116	1.2	42
	1	10	145	1.1	39
	1.3	13	189	0.9	32
GAS-11A VFC	0.7	7	102	1.8	64	15	11		950	650	915	280	63±2	20
	0.8	8	116	1.7	60
	1	10	145	1.5	53
	1.3	13	189	1.2	42
GAS-15A VFC	0.7	7	102	2.7	95	20	15		1260	850	1220	540	66±2	25
	0.8	8	116	2.5	88
	1	10	145	2.3	81
	1.3	13	189	2	71
GAS-18.5A VFC	0.7	7	102	3.2	113	25	18.5		1260	850	1220	550	67±2	25
	0.8	8	116	3	106
	1	10	145	2.8	99
	1.3	13	189	2.4	85
GAS-22A VFC	0.7	7	102	3.8	134	30	22		1260	850	1220	560	67±2	25
	0.8	8	116	3.6	127
	1	10	145	3.2	113
	1.3	13	189	2.8	99
GAS-30A VFC	0.7	7	102	5.7	201	40	30		1500	970	1375	780	67±2	40
	0.8	8	116	5.5	194
	1	10	145	5	177
	1.3	13	189	4.5	159
GAS-37A VFC	0.7	7	102	6.8	240	50	37		1500	970	1375	800	68±2	40
	0.8	8	116	6.31	222
	1	10	145	5.7	201
	1.3	13	189	5	177
GAS-45A VFC	0.7	7	102	7.9	279	60	45		1500	970	1375	820	69±2	40
	0.8	8	116	7.4	261
	1	10	145	6.9	244
	1.3	13	189	6.1	215
GAS-55A VFC	0.7	7	102	10.9	385	75	55	direct drive &air cooling or water cooling	2150	1326	1766	1550	69±2	50
	0.8	8	116	10.4	367
	1	10	145	9.4	332
	1.3	13	189	8.6	304
GAS-75A VFC	0.7	7	102	14.5	512	100	75		2150	1326	1766	1600	70±2	50
	0.8	8	116	13.8	487
	1	10	145	12.6	445
	1.3	13	189	11.2	395
GAS-90A VFC	0.7	7	102	17	600	120	90		2545	1450	1900	2500	75±2	65
	0.8	8	116	16.5	583
	1	10	145	15.2	537
	1.3	13	189	14	494

*For other requirements,please contact the salesman.

Company Information

Packaging & Shipping

FAQ

How to get quicker quotation?

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online Support
Warranty:	2 Years
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

How Do Gas Air Compressors Compare to Diesel Air Compressors?

1. Fuel Efficiency:

2. Power Output:

3. Cost:

4. Maintenance Requirements:

5. Environmental Impact:

6. Portability and Mobility:

air compressor

How Do You Transport Gas Air Compressors to Different Job Sites?

Transporting gas air compressors to different job sites requires careful planning and consideration of various factors. Here’s a detailed explanation:

1. Equipment Size and Weight:

The size and weight of the gas air compressor are crucial factors to consider when planning transportation. Gas air compressors come in different sizes and configurations, ranging from portable units to larger, skid-mounted or trailer-mounted compressors. Assess the dimensions and weight of the compressor to determine the appropriate transportation method.

2. Transportation Modes:

Gas air compressors can be transported using different modes of transportation, depending on their size, weight, and distance to the job site:

Truck or Trailer: Smaller gas air compressors can be loaded onto a truck bed or trailer for transportation. Ensure that the vehicle or trailer has the necessary capacity to accommodate the weight and dimensions of the compressor.
Flatbed or Lowboy Trailer: Larger gas compressors or skid-mounted units may require transportation on a flatbed or lowboy trailer. These trailers are designed to carry heavy equipment and provide stability during transportation.
Shipping Container: For long-distance transportation or international shipments, gas air compressors can be transported in shipping containers. The compressor must be properly secured and protected within the container to prevent any damage during transit.

3. Securing and Protection:

It is essential to secure the gas air compressor properly during transportation to prevent shifting or damage. Use appropriate tie-down straps, chains, or fasteners to secure the compressor to the transport vehicle or trailer. Protect the compressor from potential impacts, vibrations, and weather conditions by using suitable covers, padding, or weatherproof enclosures.

4. Permits and Regulations:

Depending on the size and weight of the gas air compressor, special permits or escorts may be required for transportation. Familiarize yourself with local, state, and federal regulations regarding oversize or overweight loads, and obtain the necessary permits to ensure compliance with transportation laws.

5. Route Planning:

Plan the transportation route carefully, considering factors such as road conditions, height and weight restrictions, bridges, tunnels, and any other potential obstacles. Identify alternative routes if needed, and communicate with transportation authorities or agencies to ensure a smooth and safe journey.

6. Equipment Inspection and Maintenance:

Prior to transportation, conduct a thorough inspection of the gas air compressor to ensure it is in proper working condition. Check for any leaks, damage, or loose components. Perform routine maintenance tasks, such as oil changes, filter replacements, and belt inspections, to minimize the risk of equipment failure during transportation.

In summary, transporting gas air compressors to different job sites requires considering factors such as equipment size and weight, choosing appropriate transportation modes, securing and protecting the compressor, obtaining necessary permits, planning the route, and conducting equipment inspection and maintenance. Careful planning and adherence to transportation regulations contribute to the safe and efficient transportation of gas air compressors.

air compressor

What Safety Precautions Should Be Taken When Operating Gas Air Compressors?

Operating gas air compressors safely is essential to prevent accidents, injuries, and equipment damage. It’s important to follow proper safety precautions to ensure a safe working environment. Here’s a detailed explanation of the safety precautions that should be taken when operating gas air compressors:

1. Read and Follow the Manufacturer’s Instructions:

Before operating a gas air compressor, carefully read and understand the manufacturer’s instructions, user manual, and safety guidelines. Follow the recommended procedures, maintenance schedules, and any specific instructions provided by the manufacturer.

2. Provide Adequate Ventilation:

Gas air compressors generate exhaust fumes and heat during operation. Ensure that the operating area is well-ventilated to prevent the accumulation of exhaust gases, which can be harmful or even fatal in high concentrations. If operating indoors, use ventilation systems or open windows and doors to allow fresh air circulation.

3. Wear Personal Protective Equipment (PPE):

Wear appropriate personal protective equipment (PPE) when operating a gas air compressor. This may include safety glasses, hearing protection, gloves, and sturdy footwear. PPE helps protect against potential hazards such as flying debris, noise exposure, and hand injuries.

4. Perform Regular Maintenance:

Maintain the gas air compressor according to the manufacturer’s recommendations. Regularly inspect the compressor for any signs of wear, damage, or leaks. Keep the compressor clean and free from debris. Replace worn-out parts and components as needed to ensure safe and efficient operation.

5. Preventive Measures for Fuel Handling:

If the gas air compressor is powered by fuels such as gasoline, diesel, or propane, take appropriate precautions for fuel handling:

Store fuel in approved containers and in well-ventilated areas away from ignition sources.
Refuel the compressor in a well-ventilated outdoor area, following proper refueling procedures and avoiding spills.
Handle fuel with caution, ensuring that there are no fuel leaks or spills near the compressor.
Never smoke or use open flames near the compressor or fuel storage areas.

6. Use Proper Electrical Connections:

If the gas air compressor requires electrical power, follow these electrical safety precautions:

Ensure that the electrical connections and wiring are properly grounded and in compliance with local electrical codes.
Avoid using extension cords unless recommended by the manufacturer.
Inspect electrical cords and plugs for damage before use.
Do not overload electrical circuits or use improper voltage sources.

7. Secure the Compressor:

Ensure that the gas air compressor is securely positioned and stable during operation. Use appropriate mounting or anchoring methods, especially for portable compressors. This helps prevent tipping, vibrations, and movement that could lead to accidents or injuries.

8. Familiarize Yourself with Emergency Procedures:

Be familiar with emergency procedures and know how to shut off the compressor quickly in case of an emergency or malfunction. Have fire extinguishers readily available and know how to use them effectively. Develop an emergency action plan and communicate it to all personnel working with or around the compressor.

It’s crucial to prioritize safety when operating gas air compressors. By following these safety precautions and using common sense, you can minimize the risks associated with compressor operation and create a safer work environment for yourself and others.

China Best Sales 55kw/75HP Direct Drive Screw Air Compressor Wholesale for Industry small air compressor
editor by CX 2024-04-25

China manufacturer 30HP 22kw Gas Powered Inverter CHINAMFG Rotary Screw Air Compressor for Welding manufacturer

Product Description

30HP 22KW Gas Powered Inverter CHINAMFG Rotary Screw Air Compressor for Welding

TECHNICAL DATA:

Model	WZS-30EVA
Air Flow/Working pressure	3.8m3/min @ 8bar
Air Flow/Working pressure	3.0m3/min @ 10bar
Cooling type of COMPRESSOR	Air cooling
Cooling type of MOTOR	Oil cooling
Driven method	Integrated connection
Start way	Soft VSD Start
VSD inverter	INOVANCE / HOLIP / VEICHI
Exhaust Temp.	< ambient temp. +8 degrees
Oil content	<2ppm
Noise	66±2 dB(A)
Power	380VAC/3ph/0~200Hz
Motor power	22kW/30hp
Dimension	*13808601150mm*
Weight	680kg

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Oil-less
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Horizontal
Structure Type:	Closed Type
Installation Type:	Stationary Type

Customization:	Available \|

air compressor

How Do You Maintain a Gas Air Compressor?

Maintaining a gas air compressor is essential to ensure its optimal performance, longevity, and safe operation. Regular maintenance helps prevent breakdowns, extends the compressor’s lifespan, and promotes efficient operation. Here are some key maintenance steps for a gas air compressor:

1. Read the Manual:

Before performing any maintenance tasks, thoroughly read the manufacturer’s manual specific to your gas air compressor model. The manual provides important instructions and guidelines for maintenance procedures, including recommended intervals and specific maintenance requirements.

2. Check and Change the Oil:

Gas air compressors typically require regular oil changes to maintain proper lubrication and prevent excessive wear. Check the oil level regularly and change it according to the manufacturer’s recommendations. Use the recommended grade of oil suitable for your compressor model.

3. Inspect and Replace Air Filters:

Inspect the air filters regularly and clean or replace them as needed. Air filters prevent dust, debris, and contaminants from entering the compressor’s internal components. Clogged or dirty filters can restrict airflow and reduce performance. Follow the manufacturer’s guidelines for filter cleaning or replacement.

4. Drain Moisture from the Tank:

Gas air compressors accumulate moisture in the compressed air, which can lead to corrosion and damage to the tank and internal components. Drain the moisture from the tank regularly to prevent excessive moisture buildup. Refer to the manual for instructions on how to properly drain the moisture.

5. Check and Tighten Connections:

Regularly inspect all connections, fittings, and hoses for any signs of leaks or loose connections. Tighten any loose fittings and repair or replace damaged hoses or connectors. Leaks can lead to reduced performance and inefficiency.

6. Inspect Belts and Pulleys:

If your gas air compressor has belts and pulleys, inspect them for wear, tension, and proper alignment. Replace any worn or damaged belts and ensure proper tension to maintain optimal performance.

7. Clean the Exterior and Cooling Fins:

Keep the exterior of the gas air compressor clean from dirt, dust, and debris. Use a soft cloth or brush to clean the surfaces. Additionally, clean the cooling fins regularly to remove any accumulated debris that can impede airflow and cause overheating.

8. Schedule Professional Servicing:

While regular maintenance can be performed by the user, it is also important to schedule professional servicing at recommended intervals. Professional technicians can perform thorough inspections, conduct more complex maintenance tasks, and identify any potential issues that may require attention.

9. Follow Safety Precautions:

When performing maintenance tasks on a gas air compressor, always follow safety precautions outlined in the manual. This may include wearing protective gear, disconnecting the power source, and ensuring proper ventilation in confined spaces.

By following these maintenance steps and adhering to the manufacturer’s guidelines, you can keep your gas air compressor in optimal condition, prolong its lifespan, and ensure safe and efficient operation.

air compressor

What Are the Key Components of a Gas Air Compressor Control Panel?

A gas air compressor control panel typically consists of several key components. Here’s a detailed explanation:

1. Power Switch:

The power switch allows the operator to turn the compressor on or off. It is usually a toggle switch or a push-button switch located on the control panel.

2. Pressure Gauges:

Pressure gauges display the compressed air pressure at different stages of the compression process. Commonly, there are two pressure gauges: one to measure the incoming air pressure (suction pressure) and another to measure the outgoing compressed air pressure (discharge pressure).

3. Control Knobs or Buttons:

Control knobs or buttons are used to adjust and set various parameters of the compressor operation. These controls may include pressure settings, on/off timers, automatic start/stop functions, and other operational parameters specific to the compressor model.

4. Emergency Stop Button:

An emergency stop button is a critical safety feature that immediately shuts down the compressor in case of an emergency. Pressing the emergency stop button cuts off power to the compressor and stops its operation.

5. Motor Start/Stop Buttons:

Motor start and stop buttons allow the operator to manually start or stop the compressor motor. These buttons are used when manual control of the motor is required, such as during maintenance or troubleshooting.

6. Control Indicators:

Control indicators include various lights or LEDs that provide visual feedback about the compressor’s status and operation. These indicators may include power indicators, motor running indicators, pressure indicators, and fault indicators to signal any malfunctions or abnormal conditions.

7. Control Panel Display:

Some gas air compressors feature a control panel display that provides real-time information and feedback on the compressor’s performance. The display may show parameters such as operating pressure, temperature, maintenance alerts, fault codes, and other relevant information.

8. Start/Stop Control Circuit:

The start/stop control circuit is responsible for initiating and controlling the motor start and stop sequences. It typically includes relays, contactors, and other electrical components that enable the control panel to safely start and stop the compressor motor.

9. Safety and Protection Devices:

Gas air compressor control panels may incorporate safety and protection devices to safeguard the compressor and prevent potential damage or hazardous situations. These devices can include overload relays, thermal protection, pressure relief valves, and other safety features.

10. Control Panel Enclosure:

The control panel enclosure houses and protects the electrical components and wiring of the control panel. It provides insulation, protection from dust and moisture, and ensures the safety of the operator.

In summary, a gas air compressor control panel typically includes a power switch, pressure gauges, control knobs or buttons, emergency stop button, motor start/stop buttons, control indicators, control panel display (if applicable), start/stop control circuit, safety and protection devices, and a control panel enclosure. These components work together to monitor and control the compressor’s operation, ensure safety, and provide essential information to the operator.

air compressor

Are There Different Types of Gas Air Compressors Available?

Yes, there are different types of gas air compressors available, each designed to suit specific applications and requirements. These different types vary in terms of design, power source, configuration, and intended use. Here’s a detailed explanation of the various types of gas air compressors:

1. Reciprocating Gas Air Compressors:

Reciprocating gas air compressors, also known as piston compressors, use a reciprocating motion of one or more pistons to compress the air. These compressors are commonly used for small to medium-scale applications and are available in both single-stage and two-stage configurations. Single-stage compressors compress the air in a single stroke, while two-stage compressors use an additional cylinder for further compression, resulting in higher pressures.

2. Rotary Screw Gas Air Compressors:

Rotary screw gas air compressors utilize two interlocking helical screws to compress the air. These compressors are known for their continuous and efficient operation, making them suitable for demanding industrial applications. They are often used in industries such as manufacturing, construction, and automotive where a constant supply of compressed air is required.

3. Rotary Vane Gas Air Compressors:

Rotary vane gas air compressors use a rotor with sliding vanes to compress the air. As the rotor rotates, the vanes slide in and out, creating compression chambers that compress the air. These compressors are compact, reliable, and often used for smaller-scale applications or in situations where space is limited.

4. Centrifugal Gas Air Compressors:

Centrifugal gas air compressors operate by accelerating the air using a high-speed impeller. The accelerated air is then redirected into a diffuser, which converts the velocity energy into pressure energy. These compressors are commonly used for large-scale applications requiring high volumes of compressed air, such as in power plants, refineries, or chemical processing industries.

5. Oil-Free Gas Air Compressors:

Oil-free gas air compressors are designed to provide clean, oil-free compressed air. They feature special sealing mechanisms and materials to prevent oil contamination in the compressed air. These compressors are commonly used in industries where oil-free air is essential, such as food and beverage processing, pharmaceuticals, electronics manufacturing, and painting applications.

6. Portable Gas Air Compressors:

Portable gas air compressors are specifically designed for mobility and ease of transportation. These compressors often feature wheels, handles, or trailers for convenient movement. They are commonly used in construction sites, remote job locations, outdoor events, or other situations where compressed air is needed at different locations.

7. High-Pressure Gas Air Compressors:

High-pressure gas air compressors are designed to generate compressed air at elevated pressures. These compressors are used in applications that require air pressure higher than the standard range, such as in diving operations, breathing air systems, or specialized industrial processes.

8. Biogas Air Compressors:

Biogas air compressors are specifically designed to compress biogas, which is generated from the decomposition of organic matter. These compressors are used in biogas production facilities, landfills, wastewater treatment plants, or agricultural operations where biogas is produced and utilized as an energy source.

These are just a few examples of the different types of gas air compressors available. Each type has its own advantages and is suitable for specific applications based on factors such as required airflow, pressure, mobility, oil-free operation, and environmental considerations. It’s important to choose the appropriate type of gas air compressor based on the specific needs of the application to ensure optimal performance and efficiency.

China manufacturer 30HP 22kw Gas Powered Inverter CHINAMFG Rotary Screw Air Compressor for Welding manufacturer
editor by CX 2024-01-31

China Standard ASME Single Screw Air Booster Compressor for Oil Gas Hydrogen Helium with Great quality

Product Description

Oil-free Gas Compressor Booster

Product Description

Completely oil-free reciprocating piston compressor series: flow rate from 0.01m ³/ Min, pressure ranging from 0.1MPa to 15Mpa, motor power ranging from 0.1KW to 132KW, compressed medium including air, oxygen, nitrogen, sulfur hexafluoride, oil gas, hydrogen, helium, argon, carbon dioxide, biogas, natural gas, etc. According to user requirements, there are regular, silent, explosion-proof, anti-corrosion, etc.

Simultaneously equipped with post-processing equipment including coolers, high-efficiency oil removers, refrigerated dryers, adsorption dryers, filters, etc., we provide economical and reasonable configurations according to your different requirements for compressed gas quality. Oil content<0.01PPM, dust particles<0.01HM, CHINAMFG a low pressure dew point of -40 ºC. The gas storage tank series includes air storage tanks, oxygen storage tanks, steam storage tanks, chemical storage tanks, sandblasting tanks, sub cylinders, etc., with a volume of 0.05m ³ To 1000m ³, The pressure ranges from 0.1Mpa to 10.0Mpa. The above products are widely used in industries such as food, beverage, grain machinery, water treatment, medical, pharmaceutical, petroleum, chemical, laser, communication, national defense, scientific research, metallurgy, mining, electronics, power, instruments, automotive protection, advanced spraying, etc.

Product Type

Oxygen compressor

Nitrogen compressor

Used in hospital oxygen supply centers to increase the pressure of the room’s oxygen supply pipeline, boost oxygen, and fill it into steel cylinders. It can also be used for industrial acetylene combustion cutting, cutting scrap steel in steel plants, supporting boiler oxygen combustion, and recirculating the vapor oxygen from low-temperature liquid oxygen tanks into the tanks for various working conditions

Mainly used for pressurization and filling of nitrogen gas cylinders, as well as nitrogen pressure testing and leakage testing of pipelines. The maximum filling pressure can reach 40MPA, which can be divided into air-cooled and water-cooled cooling according to the cooling method, and 3 and 4 stages of compression according to the compression stage.

Hydrogen compressor

Carbon dioxide compressor

Used for pressurizing hydrogen in steel plant heat treatment, in the polycrystalline silicon industry, to provide continuous
pressure raw material hydrogen for reactors. In the future, with the widespread construction of hydrogen refueling stations, hydrogen compressors will be more used in hydrogen fuel cells, filling hydrogen vehicles with very high pressure to obtain clean, green, and pollution-free energy.

Used for the recovery of carbon dioxide gas in dry ice plants, and for the recovery, storage, and reuse of CO2 in the supercritical extraction process of carbon dioxide; In the dry ice factory and carbon dioxide extraction process, the suction pressure of the compressor is 0-1BARG, the discharge pressure can reach 80BAR, and the flow rate is 5NM3-600NM3/hour

Product Parameters

Detailed Photos

1.The friction components are made using special self-lubricating materials, allowing them to operate without the need for any additional lubricating oil.

2.The expelled air is oil-free, eliminating concerns about secondary pollution of gas facilities and products by oil.

3.It provides both environmental and societal benefits.

4.Only 2 daily inspections are required, making usage and maintenance more convenient.

5.The oil-free design is employed, with no oil present in the crankcase and compression cylinder.

6.These components boast a long lifespan. All models utilize a 4-level motor drive, ensuring low-speed, smooth operation. The mid-cooler is divided for better temperature control, resulting in lower exhaust temperatures and reduced resistance losses in the valve group design.

Project Case

Product Applications

Application:
The above products are widely used in industries such as food, beverage, grain machinery, water treatment, medical, pharmaceutical, petroleum, chemical, laser, communication, national defense, scientific research, metallurgy, mining, electronics, power, instruments, automotive protection, advanced spraying, etc.

Company Profile

WOBO has a comprehensive marketing service system and strong continuous research and development capabilities. Its products cover more than 30 types of gas chemical compressors, including oil free lubrication air compressors, oxygen compressors, nitrogen compressors, hydrogen compressors, carbon dioxide compressors, helium compressors, argon compressors, sulfur hexafluoride compressors, etc. The maximum pressure can reach 35Mpa. The products are widely used in petrochemical, textile, food, medicine, electricity, machinery, metallurgy, etc, In various fields such as home appliances and environmental protection, our company’s multiple wind brand oil-free compressors have been exported to more than 40 countries and regions in Europe, America, Japan, South Korea, Southeast Asia, the Middle East, and Africa, winning widespread praise from many customers. The WOBO brand has established a good quality reputation in the hearts of users.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online Support, Video Technical Support
Warranty:	1 Year
Lubrication Style:	Oil-free

Samples:	US$ 6500/Unit 1 Unit(Min.Order) \| Order Sample

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

How Do Gas Air Compressors Compare to Diesel Air Compressors?

1. Fuel Efficiency:

2. Power Output:

3. Cost:

4. Maintenance Requirements:

5. Environmental Impact:

6. Portability and Mobility:

air compressor

What Are the Key Components of a Gas Air Compressor Control Panel?

A gas air compressor control panel typically consists of several key components. Here’s a detailed explanation:

1. Power Switch:

The power switch allows the operator to turn the compressor on or off. It is usually a toggle switch or a push-button switch located on the control panel.

2. Pressure Gauges:

3. Control Knobs or Buttons:

4. Emergency Stop Button:

5. Motor Start/Stop Buttons:

6. Control Indicators:

7. Control Panel Display:

8. Start/Stop Control Circuit:

9. Safety and Protection Devices:

10. Control Panel Enclosure:

air compressor

Are There Different Types of Gas Air Compressors Available?

1. Reciprocating Gas Air Compressors:

2. Rotary Screw Gas Air Compressors:

3. Rotary Vane Gas Air Compressors:

4. Centrifugal Gas Air Compressors:

5. Oil-Free Gas Air Compressors:

6. Portable Gas Air Compressors:

7. High-Pressure Gas Air Compressors:

8. Biogas Air Compressors:

China Standard ASME Single Screw Air Booster Compressor for Oil Gas Hydrogen Helium with Great quality
editor by CX 2024-01-22

China OEM High Efficiency Oil Lubricating 2 Stage Pm VSD Rotary Screw Type Air Compressor for Oil&Gas Industry 12v air compressor

Product Description

OIL INJECTED ROTARY SCREW AIR COMPRESSOR (7~10bar TWO Stage)

Product Parameters

Product Description

Hot Sale Products

2~10bar Oil-injected 7~16bar All-in-1 Small Single-phase
Screw Air Compressor Screw Air Compressor Screw Air Compressor

2~40bar 100% Oil-free 8~12bar 100% Oil-free Diesel Engine Portable
Screw Air Compressor Scroll Air Compressor Screw Air Compressor

Main Product

What we can supply:

* Oil-injected Screw Air Compressor (2~16 bar)
* All-in-1 Screw Air Compressor with Tank, Dryer, and Filters (7~16 bar)
* Single-phase Small Screw Air Compressor for Home use (8~10 bar)
* Water-injected Oil-free Screw Air Compressor (2~40 bar)
* Oil-free Scroll Air Compressor (8~12 bar)
* Diesel&Electric Engine Portable Screw Air Compressor (8~30 bar)
* Air Dryer, Air tank, Filters, and other Spare parts

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	24*7 Online Services and Video Guide
Warranty:	1 Year for The Whole Machine & 2 Years for Airend
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Installation Type:	Stationary Type

Customization:	Available \|

air compressor

Can Gas Air Compressors Be Used in Construction Projects?

Gas air compressors are widely used in construction projects due to their portability, versatility, and ability to provide the necessary compressed air for various applications. They are an essential tool in the construction industry, enabling the efficient and effective operation of pneumatic tools and equipment. Here’s a detailed explanation of how gas air compressors are used in construction projects:

1. Powering Pneumatic Tools:

Gas air compressors are commonly used to power a wide range of pneumatic tools on construction sites. These tools include jackhammers, nail guns, impact wrenches, concrete breakers, air drills, sanders, grinders, and paint sprayers. The compressed air generated by the gas air compressor provides the necessary force and power for efficient operation of these tools, enabling tasks such as concrete demolition, fastening, surface preparation, and finishing.

2. Air Blow and Cleaning Operations:

In construction projects, there is often a need to clean debris, dust, and dirt from work areas, equipment, and surfaces. Gas air compressors are used to generate high-pressure air for air blow and cleaning operations. This helps maintain cleanliness, remove loose materials, and prepare surfaces for further work, such as painting or coating.

3. Operating Pneumatic Systems:

Gas air compressors are employed to operate various pneumatic systems in construction projects. These systems include pneumatic control devices, pneumatic cylinders, and pneumatic actuators. Compressed air from the gas air compressor is used to control the movement of equipment, such as gates, doors, and barriers, as well as to operate pneumatic lifts, hoists, and other lifting mechanisms.

4. Concrete Spraying and Shotcreting:

Gas air compressors are utilized in concrete spraying and shotcreting applications. Compressed air is used to propel the concrete mixture through a nozzle at high velocity, ensuring proper adhesion and distribution on surfaces. This technique is commonly employed in applications such as tunnel construction, slope stabilization, and repair of concrete structures.

5. Sandblasting and Surface Preparation:

In construction projects that require surface preparation, such as removing old paint, rust, or coatings, gas air compressors are often used in conjunction with sandblasting equipment. Compressed air powers the sandblasting process, propelling abrasive materials such as sand or grit onto the surface to achieve effective cleaning and preparation before applying new coatings or finishes.

6. Tire Inflation and Equipment Maintenance:

Gas air compressors are utilized for tire inflation and equipment maintenance on construction sites. They provide compressed air for inflating and maintaining proper tire pressure in construction vehicles and equipment. Additionally, gas air compressors are used for general equipment maintenance, such as cleaning, lubrication, and powering pneumatic tools for repair and maintenance tasks.

7. Portable and Remote Operations:

Gas air compressors are particularly beneficial in construction projects where electricity may not be readily available or feasible. Portable gas air compressors provide the flexibility to operate in remote locations, allowing construction crews to utilize pneumatic tools and equipment without relying on a fixed power source.

Gas air compressors are an integral part of construction projects, facilitating a wide range of tasks and enhancing productivity. Their ability to power pneumatic tools, operate pneumatic systems, and provide compressed air for various applications makes them essential equipment in the construction industry.

air compressor

What Are the Key Components of a Gas Air Compressor Control Panel?

A gas air compressor control panel typically consists of several key components. Here’s a detailed explanation:

1. Power Switch:

The power switch allows the operator to turn the compressor on or off. It is usually a toggle switch or a push-button switch located on the control panel.

2. Pressure Gauges:

3. Control Knobs or Buttons:

4. Emergency Stop Button:

5. Motor Start/Stop Buttons:

6. Control Indicators:

7. Control Panel Display:

8. Start/Stop Control Circuit:

9. Safety and Protection Devices:

10. Control Panel Enclosure:

air compressor

What Are the Advantages of Using a Gas Air Compressor Over an Electric One?

1. Portability and Mobility:

2. Independence from Electricity:

3. Versatility in Fuel Options:

4. Higher Power Output:

5. Continuous Operation:

6. Quick Startup and Response:

7. Durability and Resistance to Voltage Fluctuations:

8. Lower Energy Costs:

China OEM High Efficiency Oil Lubricating 2 Stage Pm VSD Rotary Screw Type Air Compressor for Oil&Gas Industry 12v air compressor
editor by CX 2024-01-15

China Standard Oil Less Reasonable Price Screw Air Compressor for Construction air compressor portable

Product Description

ZIQI CHINAMFG Screw Air Compressor Advantages:

Technical Parameter

Model	Air pressure			Max air displacement		Motor power		transmission	dimension			Weight	Noise	Outlet
								cooling type
	mpa	bar(e)	psi(g)	m3/min	cfm	hp	kw	belt drive & air cooling	L(mm)	W(mm)	H(mm)	Kgs	dB(A)	mm
GA-3.7A	0.7	7	102	0.55	19	5	3.7		680	660	780	220	60±2	20
	0.8	8	116	0.45	16
	1	10	145	0.35	12
GA-5.5A	0.7	7	102	0.8	28	7	5.5		680	660	780	230	61±2	20
	0.8	8	116	0.7	25
	1	10	145	0.6	21
	1.3	13	189	0.5	18
GAS-7.5A VFC	0.7	7	102	1.3	46	10	7.5		950	650	915	270	62±2	20
	0.8	8	116	1.2	42
	1	10	145	1.1	39
	1.3	13	189	0.9	32
GAS-11A VFC	0.7	7	102	1.8	64	15	11		950	650	915	280	63±2	20
	0.8	8	116	1.7	60
	1	10	145	1.5	53
	1.3	13	189	1.2	42
GAS-15A VFC	0.7	7	102	2.7	95	20	15		1260	850	1220	540	66±2	25
	0.8	8	116	2.5	88
	1	10	145	2.3	81
	1.3	13	189	2	71
GAS-18.5A VFC	0.7	7	102	3.2	113	25	18.5		1260	850	1220	550	67±2	25
	0.8	8	116	3	106
	1	10	145	2.8	99
	1.3	13	189	2.4	85
GAS-22A VFC	0.7	7	102	3.8	134	30	22		1260	850	1220	560	67±2	25
	0.8	8	116	3.6	127
	1	10	145	3.2	113
	1.3	13	189	2.8	99
GAS-30A VFC	0.7	7	102	5.7	201	40	30		1500	970	1375	780	67±2	40
	0.8	8	116	5.5	194
	1	10	145	5	177
	1.3	13	189	4.5	159
GAS-37A VFC	0.7	7	102	6.8	240	50	37		1500	970	1375	800	68±2	40
	0.8	8	116	6.31	222
	1	10	145	5.7	201
	1.3	13	189	5	177
GAS-45A VFC	0.7	7	102	7.9	279	60	45		1500	970	1375	820	69±2	40
	0.8	8	116	7.4	261
	1	10	145	6.9	244
	1.3	13	189	6.1	215
GAS-55A VFC	0.7	7	102	10.9	385	75	55	direct drive &air cooling or water cooling	2150	1326	1766	1550	69±2	50
	0.8	8	116	10.4	367
	1	10	145	9.4	332
	1.3	13	189	8.6	304
GAS-75A VFC	0.7	7	102	14.5	512	100	75		2150	1326	1766	1600	70±2	50
	0.8	8	116	13.8	487
	1	10	145	12.6	445
	1.3	13	189	11.2	395
GAS-90A VFC	0.7	7	102	17	600	120	90		2545	1450	1900	2500	75±2	65
	0.8	8	116	16.5	583
	1	10	145	15.2	537
	1.3	13	189	14	494

*For other requirements,please contact the salesman.

Company Information

Packaging & Shipping

FAQ

How to get quicker quotation?

After-sales Service:	Online Support
Warranty:	2 Years
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

How Do You Maintain a Gas Air Compressor?

1. Read the Manual:

2. Check and Change the Oil:

3. Inspect and Replace Air Filters:

4. Drain Moisture from the Tank:

5. Check and Tighten Connections:

6. Inspect Belts and Pulleys:

If your gas air compressor has belts and pulleys, inspect them for wear, tension, and proper alignment. Replace any worn or damaged belts and ensure proper tension to maintain optimal performance.

7. Clean the Exterior and Cooling Fins:

8. Schedule Professional Servicing:

9. Follow Safety Precautions:

air compressor

What Are the Key Components of a Gas Air Compressor Control Panel?

A gas air compressor control panel typically consists of several key components. Here’s a detailed explanation:

1. Power Switch:

The power switch allows the operator to turn the compressor on or off. It is usually a toggle switch or a push-button switch located on the control panel.

2. Pressure Gauges:

3. Control Knobs or Buttons:

4. Emergency Stop Button:

5. Motor Start/Stop Buttons:

6. Control Indicators:

7. Control Panel Display:

8. Start/Stop Control Circuit:

9. Safety and Protection Devices:

10. Control Panel Enclosure:

air compressor

What Are the Primary Applications of Gas Air Compressors?

1. Construction Industry:

2. Agriculture and Farming:

3. Recreational Activities:

4. Mobile Service Operations:

5. Remote Job Sites:

6. Emergency and Backup Power:

7. Sandblasting and Surface Preparation:

8. Off-Road and Outdoor Equipment:

China Standard Oil Less Reasonable Price Screw Air Compressor for Construction air compressor portable
editor by CX 2023-11-14

China manufacturer 445cfm Screw Air Compressor for Medical Ventilator supplier

Product Description

ZIQI CHINAMFG Screw Air Compressor Advantages:

Technical Parameter

Model	Air pressure			Max air displacement		Motor power		transmission	dimension			Weight	Noise	Outlet
								cooling type
	mpa	bar(e)	psi(g)	m3/min	cfm	hp	kw	belt drive & air cooling	L(mm)	W(mm)	H(mm)	Kgs	dB(A)	mm
GA-3.7A	0.7	7	102	0.55	19	5	3.7		680	660	780	220	60±2	20
	0.8	8	116	0.45	16
	1	10	145	0.35	12
GA-5.5A	0.7	7	102	0.8	28	7	5.5		680	660	780	230	61±2	20
	0.8	8	116	0.7	25
	1	10	145	0.6	21
	1.3	13	189	0.5	18
GAS-7.5A VFC	0.7	7	102	1.3	46	10	7.5		950	650	915	270	62±2	20
	0.8	8	116	1.2	42
	1	10	145	1.1	39
	1.3	13	189	0.9	32
GAS-11A VFC	0.7	7	102	1.8	64	15	11		950	650	915	280	63±2	20
	0.8	8	116	1.7	60
	1	10	145	1.5	53
	1.3	13	189	1.2	42
GAS-15A VFC	0.7	7	102	2.7	95	20	15		1260	850	1220	540	66±2	25
	0.8	8	116	2.5	88
	1	10	145	2.3	81
	1.3	13	189	2	71
GAS-18.5A VFC	0.7	7	102	3.2	113	25	18.5		1260	850	1220	550	67±2	25
	0.8	8	116	3	106
	1	10	145	2.8	99
	1.3	13	189	2.4	85
GAS-22A VFC	0.7	7	102	3.8	134	30	22		1260	850	1220	560	67±2	25
	0.8	8	116	3.6	127
	1	10	145	3.2	113
	1.3	13	189	2.8	99
GAS-30A VFC	0.7	7	102	5.7	201	40	30		1500	970	1375	780	67±2	40
	0.8	8	116	5.5	194
	1	10	145	5	177
	1.3	13	189	4.5	159
GAS-37A VFC	0.7	7	102	6.8	240	50	37		1500	970	1375	800	68±2	40
	0.8	8	116	6.31	222
	1	10	145	5.7	201
	1.3	13	189	5	177
GAS-45A VFC	0.7	7	102	7.9	279	60	45		1500	970	1375	820	69±2	40
	0.8	8	116	7.4	261
	1	10	145	6.9	244
	1.3	13	189	6.1	215
GAS-55A VFC	0.7	7	102	10.9	385	75	55	direct drive &air cooling or water cooling	2150	1326	1766	1550	69±2	50
	0.8	8	116	10.4	367
	1	10	145	9.4	332
	1.3	13	189	8.6	304
GAS-75A VFC	0.7	7	102	14.5	512	100	75		2150	1326	1766	1600	70±2	50
	0.8	8	116	13.8	487
	1	10	145	12.6	445
	1.3	13	189	11.2	395
GAS-90A VFC	0.7	7	102	17	600	120	90		2545	1450	1900	2500	75±2	65
	0.8	8	116	16.5	583
	1	10	145	15.2	537
	1.3	13	189	14	494

*For other requirements,please contact the salesman.

Company Information

Packaging & Shipping

FAQ

How to get quicker quotation?

After-sales Service:	Online Support
Warranty:	1 Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

How Do You Troubleshoot Common Issues with Gas Air Compressors?

Troubleshooting common issues with gas air compressors involves identifying and addressing potential problems that may arise during operation. Here’s a detailed explanation of the troubleshooting process:

1. Start with Safety Precautions:

Prior to troubleshooting, ensure that the gas air compressor is turned off and disconnected from the power source. Follow proper safety procedures, such as wearing appropriate personal protective equipment (PPE), to avoid accidents or injuries.

2. Check Power Supply and Connections:

Verify that the compressor is receiving power and that all electrical connections are secure. Inspect the power cord, plug, and any switches or controls to ensure they are functioning properly. If the compressor is equipped with a battery, check its charge level and connections.

3. Check Fuel Supply:

For gas air compressors that use gasoline or propane, ensure that there is an adequate fuel supply. Check the fuel tank level and verify that the fuel shut-off valve is open. If the compressor has been sitting idle for an extended period, old or stale fuel may cause starting issues. Consider draining and replacing the fuel if necessary.

4. Inspect Air Filters:

Dirty or clogged air filters can restrict airflow and affect the compressor’s performance. Check the intake air filters and clean or replace them as needed. Clogged filters can be cleaned with compressed air or washed with mild detergent and water, depending on the type of filter.

5. Check Oil Level and Quality:

If the gas air compressor has an engine with an oil reservoir, verify the oil level using the dipstick or oil level indicator. Insufficient oil can lead to engine damage or poor performance. Additionally, check the oil quality to ensure it is clean and within the recommended viscosity range. If needed, change the oil following the manufacturer’s guidelines.

6. Inspect Spark Plug:

If the gas air compressor uses a spark plug ignition system, inspect the spark plug for signs of damage or fouling. Clean or replace the spark plug if necessary, following the manufacturer’s recommendations for gap setting and torque.

7. Check Belts and Pulleys:

Inspect the belts and pulleys that drive the compressor pump. Loose or worn belts can cause slippage and affect the compressor’s performance. Tighten or replace any damaged belts, and ensure that the pulleys are properly aligned.

8. Listen for Unusual Noises:

During operation, listen for any unusual or excessive noises, such as grinding, rattling, or squealing sounds. Unusual noises could indicate mechanical issues, loose components, or improper lubrication. If identified, consult the compressor’s manual or contact a qualified technician for further inspection and repair.

9. Consult the Owner’s Manual:

If troubleshooting steps do not resolve the issue, refer to the compressor’s owner’s manual for specific troubleshooting guidance. The manual may provide additional troubleshooting steps, diagnostic charts, or recommended maintenance procedures.

10. Seek Professional Assistance:

If the issue persists or if you are unsure about performing further troubleshooting steps, it is recommended to seek assistance from a qualified technician or contact the manufacturer’s customer support for guidance.

Remember to always prioritize safety and follow proper maintenance practices to prevent issues and ensure the reliable performance of the gas air compressor.

air compressor

What Is the Impact of Altitude on Gas Air Compressor Performance?

Altitude can have a significant impact on the performance of gas air compressors. Here’s a detailed explanation:

1. Decreased Air Density:

As altitude increases, the air density decreases. This reduction in air density affects the performance of gas air compressors, primarily because compressors rely on the intake of ambient air to generate compressed air. With lower air density at higher altitudes, the compressor’s ability to draw in a sufficient volume of air is reduced.

2. Reduced Compressor Output:

The decrease in air density directly affects the compressor’s output. Gas air compressors may experience a decrease in their maximum airflow and pressure capabilities at higher altitudes. This reduction in output can impact the compressor’s efficiency and its ability to deliver the required compressed air for various applications.

3. Increased Compressor Workload:

At higher altitudes, gas air compressors need to work harder to maintain the desired level of compressed air output. The reduced air density means the compressor must compress a larger volume of air to achieve the same pressure as it would at lower altitudes. This increased workload can lead to higher energy consumption, increased wear and tear on the compressor components, and potentially decreased overall performance and lifespan.

4. Engine Power Loss:

If the gas air compressor is powered by an internal combustion engine (such as gasoline or diesel), altitude can also impact the engine’s performance. As the air density decreases, the engine may experience a power loss due to reduced oxygen availability for combustion. This can result in reduced engine horsepower and torque, affecting the compressor’s ability to generate compressed air.

5. Considerations for Proper Sizing:

When selecting a gas air compressor for use at higher altitudes, it is crucial to consider the specific altitude conditions and adjust the compressor’s size and capacity accordingly. Choosing a compressor with a higher airflow and pressure rating than required at sea level can help compensate for the reduced performance at higher altitudes.

6. Maintenance and Adjustments:

Regular maintenance and adjustments are necessary to optimize the performance of gas air compressors operating at higher altitudes. This includes monitoring and adjusting the compressor’s intake systems, fuel-to-air ratio, and ignition timing to account for the reduced air density and maintain proper combustion efficiency.

In summary, altitude has a notable impact on the performance of gas air compressors. The decrease in air density at higher altitudes leads to reduced compressor output, increased compressor workload, potential engine power loss, and considerations for proper sizing and maintenance. Understanding these effects is crucial for selecting and operating gas air compressors effectively in various altitude conditions.

air compressor

Can Gas Air Compressors Be Used in Remote Locations?

Yes, gas air compressors are well-suited for use in remote locations where access to electricity may be limited or unavailable. Their portability and reliance on gas engines make them an ideal choice for providing a reliable source of compressed air in such environments. Here’s a detailed explanation of how gas air compressors can be used in remote locations:

1. Independence from Electrical Grid:

Gas air compressors do not require a direct connection to the electrical grid, unlike electric air compressors. This independence from the electrical grid allows gas air compressors to be used in remote locations, such as wilderness areas, remote job sites, or off-grid locations, where it may be impractical or cost-prohibitive to establish electrical infrastructure.

2. Mobility and Portability:

Gas air compressors are designed to be portable and easy to transport. They are often equipped with handles, wheels, or trailers, making them suitable for remote locations. The gas engine powering the compressor provides mobility, allowing the compressor to be moved to different areas within the remote location as needed.

3. Fuel Versatility:

Gas air compressors can be fueled by various types of combustible gases, including gasoline, diesel, natural gas, or propane. This fuel versatility ensures that gas air compressors can adapt to the available fuel sources in remote locations. For example, if gasoline or diesel is readily available, the gas air compressor can be fueled with these fuels. Similarly, if natural gas or propane is accessible, the compressor can be configured to run on these gases.

4. On-Site Power Generation:

In remote locations where electricity is limited, gas air compressors can serve as on-site power generators. They can power not only the compressor itself but also other equipment or tools that require electricity for operation. This versatility makes gas air compressors useful for a wide range of applications in remote locations, such as powering lights, tools, communication devices, or small appliances.

5. Off-Grid Operations:

Gas air compressors enable off-grid operations, allowing tasks and activities to be carried out in remote locations without relying on external power sources. This is particularly valuable in industries such as mining, oil and gas exploration, forestry, or construction, where operations may take place in remote and isolated areas. Gas air compressors provide the necessary compressed air for pneumatic tools, drilling equipment, and other machinery required for these operations.

6. Emergency Preparedness:

Gas air compressors are also beneficial for emergency preparedness in remote locations. In situations where natural disasters or emergencies disrupt the power supply, gas air compressors can provide a reliable source of compressed air for essential equipment and systems. They can power emergency lighting, communication devices, medical equipment, or backup generators, ensuring operational continuity in critical situations.

7. Adaptability to Challenging Environments:

Gas air compressors are designed to withstand various environmental conditions, including extreme temperatures, humidity, dust, and vibrations. This adaptability to challenging environments makes them suitable for use in remote locations, where environmental conditions may be harsh or unpredictable.

Overall, gas air compressors can be effectively used in remote locations due to their independence from the electrical grid, mobility, fuel versatility, on-site power generation capabilities, suitability for off-grid operations, emergency preparedness, and adaptability to challenging environments. These compressors provide a reliable source of compressed air, enabling a wide range of applications in remote settings.

China manufacturer 445cfm Screw Air Compressor for Medical Ventilator supplier
editor by CX 2023-10-25

China Professional 445cfm Screw Air Compressor for Medical Ventilator with Best Sales

Product Description

ZIQI CHINAMFG Screw Air Compressor Advantages:

Technical Parameter

Model	Air pressure			Max air displacement		Motor power		transmission	dimension			Weight	Noise	Outlet
								cooling type
	mpa	bar(e)	psi(g)	m3/min	cfm	hp	kw	belt drive & air cooling	L(mm)	W(mm)	H(mm)	Kgs	dB(A)	mm
GA-3.7A	0.7	7	102	0.55	19	5	3.7		680	660	780	220	60±2	20
	0.8	8	116	0.45	16
	1	10	145	0.35	12
GA-5.5A	0.7	7	102	0.8	28	7	5.5		680	660	780	230	61±2	20
	0.8	8	116	0.7	25
	1	10	145	0.6	21
	1.3	13	189	0.5	18
GAS-7.5A VFC	0.7	7	102	1.3	46	10	7.5		950	650	915	270	62±2	20
	0.8	8	116	1.2	42
	1	10	145	1.1	39
	1.3	13	189	0.9	32
GAS-11A VFC	0.7	7	102	1.8	64	15	11		950	650	915	280	63±2	20
	0.8	8	116	1.7	60
	1	10	145	1.5	53
	1.3	13	189	1.2	42
GAS-15A VFC	0.7	7	102	2.7	95	20	15		1260	850	1220	540	66±2	25
	0.8	8	116	2.5	88
	1	10	145	2.3	81
	1.3	13	189	2	71
GAS-18.5A VFC	0.7	7	102	3.2	113	25	18.5		1260	850	1220	550	67±2	25
	0.8	8	116	3	106
	1	10	145	2.8	99
	1.3	13	189	2.4	85
GAS-22A VFC	0.7	7	102	3.8	134	30	22		1260	850	1220	560	67±2	25
	0.8	8	116	3.6	127
	1	10	145	3.2	113
	1.3	13	189	2.8	99
GAS-30A VFC	0.7	7	102	5.7	201	40	30		1500	970	1375	780	67±2	40
	0.8	8	116	5.5	194
	1	10	145	5	177
	1.3	13	189	4.5	159
GAS-37A VFC	0.7	7	102	6.8	240	50	37		1500	970	1375	800	68±2	40
	0.8	8	116	6.31	222
	1	10	145	5.7	201
	1.3	13	189	5	177
GAS-45A VFC	0.7	7	102	7.9	279	60	45		1500	970	1375	820	69±2	40
	0.8	8	116	7.4	261
	1	10	145	6.9	244
	1.3	13	189	6.1	215
GAS-55A VFC	0.7	7	102	10.9	385	75	55	direct drive &air cooling or water cooling	2150	1326	1766	1550	69±2	50
	0.8	8	116	10.4	367
	1	10	145	9.4	332
	1.3	13	189	8.6	304
GAS-75A VFC	0.7	7	102	14.5	512	100	75		2150	1326	1766	1600	70±2	50
	0.8	8	116	13.8	487
	1	10	145	12.6	445
	1.3	13	189	11.2	395
GAS-90A VFC	0.7	7	102	17	600	120	90		2545	1450	1900	2500	75±2	65
	0.8	8	116	16.5	583
	1	10	145	15.2	537
	1.3	13	189	14	494

*For other requirements,please contact the salesman.

Company Information

Packaging & Shipping

FAQ

How to get quicker quotation?

After-sales Service:	Online Support
Warranty:	1 Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

Can Gas Air Compressors Be Used in Construction Projects?

1. Powering Pneumatic Tools:

2. Air Blow and Cleaning Operations:

3. Operating Pneumatic Systems:

4. Concrete Spraying and Shotcreting:

5. Sandblasting and Surface Preparation:

6. Tire Inflation and Equipment Maintenance:

7. Portable and Remote Operations:

air compressor

What Are the Key Components of a Gas Air Compressor Control Panel?

A gas air compressor control panel typically consists of several key components. Here’s a detailed explanation:

1. Power Switch:

The power switch allows the operator to turn the compressor on or off. It is usually a toggle switch or a push-button switch located on the control panel.

2. Pressure Gauges:

3. Control Knobs or Buttons:

4. Emergency Stop Button:

5. Motor Start/Stop Buttons:

6. Control Indicators:

7. Control Panel Display:

8. Start/Stop Control Circuit:

9. Safety and Protection Devices:

10. Control Panel Enclosure:

air compressor

What Safety Precautions Should Be Taken When Operating Gas Air Compressors?

1. Read and Follow the Manufacturer’s Instructions:

2. Provide Adequate Ventilation:

3. Wear Personal Protective Equipment (PPE):

4. Perform Regular Maintenance:

5. Preventive Measures for Fuel Handling:

If the gas air compressor is powered by fuels such as gasoline, diesel, or propane, take appropriate precautions for fuel handling:

Store fuel in approved containers and in well-ventilated areas away from ignition sources.
Refuel the compressor in a well-ventilated outdoor area, following proper refueling procedures and avoiding spills.
Handle fuel with caution, ensuring that there are no fuel leaks or spills near the compressor.
Never smoke or use open flames near the compressor or fuel storage areas.

6. Use Proper Electrical Connections:

If the gas air compressor requires electrical power, follow these electrical safety precautions:

Ensure that the electrical connections and wiring are properly grounded and in compliance with local electrical codes.
Avoid using extension cords unless recommended by the manufacturer.
Inspect electrical cords and plugs for damage before use.
Do not overload electrical circuits or use improper voltage sources.

7. Secure the Compressor:

8. Familiarize Yourself with Emergency Procedures:

China Professional 445cfm Screw Air Compressor for Medical Ventilator with Best Sales
editor by CX 2023-10-24