Tag Archives: solar compressor

China 2 Ton Split Type Famous Japanese Compressor Hybrid Solar Conditioning

Product Description

2 ton Split Type Famous Japanese Compressor Hybrid solar conditioning

 

Product Details
When the power on, the compressor start working, it compress the refrigerant from low pressure to high pressure, low temperature to high temperature, then discharge to heat ex-changer of the solar collector,
In sunshine time ,the vacuum tube can absorb the sunshine to heat the water of the water tank, then the hot water will translate the heating to refrigerant by the ex-changer, then help the compressor heat the temperature and increase the pressure of the refrigerant again,so it  just need use the small compressor driver the system running, just use the less power to cool or heat the room,to save more energy.
 
Hybrid solar air-conditioner is driven by electricity and with solar energy as an auxiliary power.The 2 kinds of energy work complementally in accordance with principles of fluid dynamics. It combines the absorption working system with compression system by using environmental-friendly media in cooling and heating on the basis of traditional air-conditioner technology to achieve energy-saving and environment protection.
 
Product Introduction

(9000BTU-24000BTU) for Wall Mounted range. Up to 48000btu for Cassette,Ducted, Floor standing,Floor ceiling series.

  1. on Grid Working with 50% solar energy
  2. Supreme high efficiency rating reach to 4.0

     3.Fashion and Elegant Design, LED Display,Quiet Running
     4.Vacuum thermal tube solar collector ,with easy installation and affordable cost
     5. CZPT Compressor
     6. Blue Coating Heat Ex-changer (Better heat transfer effect)
     7.100% Copper Connection Pipes With Insulation
     8.Environmental Friendly Gas R410A   

Product Parameters 

Freon:R410            
Power Supply:220-240VAC, 1PH, 50/60Hz            
Performance            
 Capacity Cooling Btu/h 9000BTU 11500BTU 12000BTU 18000BTU
W 2600 3200 3500 5200
Heating Btu/h 10000 12000 13000 20000
W 2900 3500 3800 6000
Noise Indoor dB(A) ≤40 ≤42 ≤42 ≤44
Outdoor dB(A) ≤50 ≤52 ≤52 ≤54
Air Circulation m³/h 500 520 550 800
Suitable Area 11~17 13~21 15~23 26~36
EER W/W 3.84 3.72 3.89 3.83
Btu/h/w 12.42 12.69 13.27 13.07
Power Consumption            
Power Input Cooling W 650~770 780~940 800~1571 1100~1300
Heating W 650~780 780~950 800~1050 1150~1350
Rated Current Cooling A 3.00~3.60 3.55~4.27 3.70~4.80 6.30~7.30
Heating A 3.00~3.65 3.55~4.31 3.70~4.90 6.30~7.50
Vacuum Tube Diameter*Length*Pcs 47*520*10 47*520*10 47*520*10 47*620*11
Flat plate solar collector WXDXH 1000x550x90 1000x550x90 1000x550x90 1000x550x90
Dimensions            
Indoor Unit Net mm 775*265*210 775×265×210 775×265×210 985×300×220
Shipping mm 840*325*265 840×325×265 840×325×265 1080×380×300
Outdoor Unit Net mm 790*260*540 790*260*540 790*260*540 850*300*755
Shipping mm 910*370*610 910*370*610 910*370*610 950*410*760 
Water Tank Shipping mm 910*400*330 910*400*330 910*400*330 980*400*370
Vacuum Tube Shipping mm
Flat plate solar collector Shipping mm 1100x650x110 1100x650x110 1100x650x110 1100x650x110
Weight            
Indoor Unit Net/Gross kg 9/10.5 10/11.5 10/11.5 16/17.5
Outdoor Unit Net/Gross kg 31/34 36/38 38/40 50/52
Solar Collector Net/Gross kg 13/15 13/15 13/15 16/17
Loading Qty in 20feet sets 75 75 75 55
40HQ sets 175 175 175 125

 

Freon:R410          
Power Supply:220-240VAC, 1PH, 50/60Hz          
Performance          
 Capacity Cooling Btu/h 20000BTU 24000BTU 36000BTU
W 6000 7200 10000
Heating Btu/h 22000 27000 40000
W 6600 7900 11000
Noise Indoor dB(A) ≤46 ≤50 ≤52
Outdoor dB(A) ≤56 ≤58 ≤60
Air Circulation m³/h 850 1150 1350
Suitable Area 25~42 30~48 40~60
EER W/W 3.88 3.82 3.82
Btu/h/w 13.24 13.03 13.03
Power Consumption          
Power Input Cooling W 1350~1560 1700~1900 2400~2640
Heating W 1350~1590 1700~1950 2470~2650
Rated Current Cooling A 6.30~7.30 8.00~8.90 10.91~11.95
Heating A 6.30~7.50 8.00~8.90 11.23~12.05
Vacuum Tube Diameter*Length*Pcs 47*620*11 47*620*11 47*620*11
Flat plate solar collector WXDXH 1000x550x90 1000x550x90 900x500x80
Dimensions          
Indoor Unit Net mm 985×300×220 985×300×220 1080×320×240
Shipping mm 1080×380×300 1080×380×300 1150×420×320
Outdoor Unit Net mm 850*300*755 850*300*755 865*310*710
Shipping mm 950*410*760  950*410*760  1571*395*790
Water Tank Shipping mm 980*400*370 980*400*370 980*400*370
Vacuum Tube Shipping mm
Flat plate solar collector Shipping mm 1100x650x110 1100x650x110 950x550x90mm
Weight          
Indoor Unit Net/Gross kg 16/17.5 20/22 23/25
Outdoor Unit Net/Gross kg 50/52 55/58 65/70
Solar Collector Net/Gross kg 16/17 16/17 16/17
Loading Qty in 20feet sets 55 55 50
40HQ sets 125 125 115

Product Details Show:

Solar air conditioner projects:

Product Processing 

Product Packing  

 
Hot Products 

 
Why Choose Us?

1.Reply your inquiry in 24Hrs
2.Feedback of complaint in 24Hrs
3.OEM/ODM are accepted
4.Exclusive agents in local country are welcomed
5.Providing professional technical advice
6. Supergreen Tech Co.,Ltd, is a professional manufacturer of solar products such as Solar lights, Solar air conditioner, Solar refrigerators, Solar pest control lamp and so on.
With CE certification and several patent technology, making sure that we can provide all of our clients the best user friendly products!
 
FAQ:

Q1. Can I have a sample order for Solar air conditioner?
     Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
      Sample needs 7-20 days, mass production time needs 3-6 weeks. 
 
Q3. Do you have any MOQ limit for air conditioner order?
       Low MOQ, 1pc for sample checking is available
 
Q4. How do you ship the goods and how long does it take to arrive?
       We usually ship by Sea shipping. It usually takes around 1-2 months
 
Q5. How to proceed an order for solar air conditioner ?
       Firstly let us know your requirements or application.
       Secondly We quote according to your requirements or our suggestions.
       Thirdly customer confirms the samples and places deposit for formal order.
        Fourthly We arrange the production.
 
Q6. Is it OK to print my logo on air conditioner product?
      Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
 
Q7: Do you offer guarantee for the products?
      Yes,we offer 2-5 years warranty to our products.
 
Q8: How to deal with the faulty?
Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will repair them and resend them to you or provide the new parts to replace and ship with new containers. And we can discuss the solution including re-call according to real situation.
 
Welcome to work with us !
supergreensolar      
 

Choosing the Right Air Compressor For Your Home

You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only 1 motor, they are lightweight, compact, and easy to handle. Using 1 air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.

Positive displacement

A positive displacement compressor applies pressure to a fluid, whereas a centrifugal 1 does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
air-compressor

Oil-free

Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has 1 of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, 4 times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing 1 for your industrial applications.

Single-stage

A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has 1 cylinder and 2 valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery 1 controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, 1 piston, and 1 air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage 1 is suitable for larger-scale arsenals.
air-compressor

CFM

The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting 2 output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.

PSI

The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure 20 to 40 PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least 40 to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as 50 percent on and 20-5 percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by 1 percent.
air-compressor

Power source

The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately 4 amps of power. A one-horsepower compressor would draw about 12 amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with 3 electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.

China 2 Ton Split Type Famous Japanese Compressor Hybrid Solar Conditioning  China 2 Ton Split Type Famous Japanese Compressor Hybrid Solar Conditioning

China Mini Split Solar Price Compressor Ducted Air Conditioner

Product Description

Heating and cooling dc split wall air conditioner with price

Product description
1.9000btu 12000btu 18000btu 24000btu 30000btu split air conditioner
2.wall split mount air conditioner for rooms etc
3.dc inverter air conditioner
4.heating pump wall split air conditioner
5.factory wholesale with cheap price and professional service
 

Model No.  VAC-09CHS/* VAC-12CHS/* VAC-18CHS/* VAC-24CHS/* VAC-30CHS/*
Type Heating Pump Heating Pump Heating Pump Heating Pump Heating Pump
Control type remote remote remote remote remote
Rated cooling capacity Btu/h 9,000 12,000 18,000 24000 30000
Rated heating capacity Btu/h 9,000 12,500 18,000 24500 30500
Moisture removal Liters/h 0.8 1.0 1.5 2.0 2.5
Pressure High(DP) MPa 2.8 2.8 2.8 2.8 2.8
Low(SP) MPa 1.2 1.2 1.2 1.2 1.2
Indoor noise level at cooling High dB(A) 36 42 45 49 52
Med. dB(A) 34 39 41 44 47
Low dB(A) 31 36 38 40 43
Outdoor noise level dB(A) 50 52 54 58 64
Electrical Data  
Power supply 220~240V~/50Hz 220~240V~/50Hz 220~240V~/50Hz 220~240V~/50Hz 220~240V~/50Hz
Voltage Range V 198~264 198~264 198~264 198~264 198~264
Rated current Cooling A 4.3 5.6 8.5 11.3 14.9
Heating A 4.1 5.7 8.2 11.5 15.0
Rated input Cooling W 940 1240 1880 2480 3280
Heating W 910 1250 1800 2520 3310
Annual energy consumption kwh (cooling) 470 620 940 1240  
Max Current Cooling A 5.6 7.3 11.1 14.5 19.4
Heating A 5.4 7.4 10.6 14.9 19.6
Max Power input Cooling W 1220 1610 2440 3220 4260
Heating W 1180 1630 2340 3280 4300
Refrigerating System  
Refrigerant/Charge Gram R22 R22 R22 R22 R22
Compressor Type Rotary Rotary Rotary Rotary Rotary
BRAND     RECHI RECHI RECHI GMCC CRSS
Fan System  
Indoor air circulation(Cooling/Heating) m3/h 480 520 780 1000 1300
Indoor fan type Cross flow Cross flow Cross flow Cross flow Cross flow
Outdoor fan type Propeller Propeller Propeller Propeller Propeller
Connections  
Connecting Pipe Gas mm Φ9.52(3/8”) Φ12(1/2”) Φ12(1/2”) Φ15.88(5/8”) Φ15.88(5/8”)
Liquid mm Φ6(1/4”) Φ6(1/4”) Φ6(1/4”) Φ9.52(3/8”) Φ9.52(3/8”)
Connecting Wiring Size x Core number 1.0×3; 0.75×2 1.0×3; 0.75×2 1.5×3; 0.75×2 0.75×4; 0.75×2 0.75×4
Others  
Suitable area m2 9~16 15~23 20~35 27~45 50~70
Net dimensions                  (W x H x D) Indoor mm 718×240×180 770×240×180 900x280x202 1033×313×202 1186×340×260
Outdoor mm 600×232×500 700×256×552 760×256×552 820×300×605 900×805×360
Packing dimensions              (W x H x D) Indoor mm 805×305×255 855×305×255 985x365x298 1103×400×300 1265×415×338
Outdoor mm 745×353×550 803×361×600 863×361×590 950×426×640 1031×925×447
Net weight Indoor kg 6 8 10 14 17
Outdoor kg 24 30 38 46 68
Gross weight Indoor kg 8 10 13 17 21
Outdoor(without pipe) kg 27 34 41 50 74
Outdoor(with pipe) kg 28 35 42 53 77
Loading Capacity 20’/40’/40’HC 132/277/310 103/235/275 95/198/222 70/150/166 98(40’HC)

Company Information

Vestar  has engaged in home appliances markert for more than 10 years .

we are always absorbed in the design and manufacture of high  quality product.

the products are with integrating efficiency, smallest noise , energy saving

security and full respect for the environment , we sell our products more than

70country as France, UK , Russia, Ukraine , India, Algeria , united Arab products

withmost profeesional service. 

FAQ
1.Why to Choose Our Factory and Products ?
We Are Manufacturer and Have More Than 15 Years Experted Experience in This Field.
2.What Will We Do for Our Customers ?
We Can Do Pre-inspection for You Which is A Good Idea for Both.
We Will Surely Send the Goods According to the Sample Sealed and Agreed in the PI and Other Documents. 
Besides, We Also Provide 24 Hours Online Technical Supports and Lifetime After-Sale Services
3.What is Your Product Range?                                                                                                                           Air Conditioner, Refrigerator, cooker hood, oven, Washing Machine, Dishwasher, Gas Hob, Microwave
4.What Competitive advantages do you have?                                                                                                   a.Competitive price
b. Good after-sale service
c. Fast delivery time
d. High quality control
e. Material is made of 100% recycle material
f. Customized technical request, size, design and packing is welcomed
g.Provide one-step service from design, produce to quality control, sale and shipping
 

what to see in an air compressor

If you need to buy an air compressor, you should know what to look for. The types of air compressors on the market are classified according to their CFM rating, safety devices, and pumps. There are several differences between lubricated and oil-free air compressors that you should know before buying. To better understand the difference between these types of air compressors, read on. This article will guide you through these differences.

Pump

If you are looking for a quality air compressor, you have come to the right place. A good air compressor pump will provide high pressure for anything from tires to boats and more. There are hundreds of different models to choose from, and the great thing about buying 1 from a Chinese manufacturer is that they have so many options. More importantly, Chinese manufacturers can customize air equipment such as air compressors at low prices.
A good quality air pump won’t break easily, but you’ll be able to use it for years. Choosing a high-quality pump will help you avoid many hassles on the road, such as unplanned downtime and installation costs. Plus, a pump from the same manufacturer as your air compressor is your best bet to ensure optimum performance. Listed below are some tips for finding a quality pump for your air compressor.
The air compressor is an important but unremarkable invention. Without them, our lives would be completely different. Without a pump, we can’t get hot water from central heating, nor can we get heat from the refrigerator. We can’t inflate bicycle tires, and we can’t refuel cars. Pumps are vital to all kinds of machines. So why is it important to choose the right product? The answer may surprise you.
Different types of pumps are used for different applications. Positive displacement pumps move a fixed volume of fluid and direct it to a drain. This design ensures constant flow at a constant speed regardless of discharge pressure. Centrifugal pumps work differently. The impeller accelerates the fluid, converting the input energy into kinetic energy. This type of pump is most commonly used in mines, air conditioning, industrial plants, and flood control.
air-compressor

safety equipment

There are several safety features you should check when using an air compressor. First, check the connection of the air filter to the air. If they come loose, parts may separate and cause injury. Another important safety feature is the shut-off valve. When working near compressed air, the shut-off valve should be within easy reach and visibility. Moving parts and other equipment must be protected with protective covers. Check safety valve and replace damaged parts.
Rupture discs are copper discs located on the air cooler. When the air pressure exceeds a certain limit, it bursts. Fusible plugs contain materials that melt at high temperatures. The compressor should have a lubricating oil pressure alarm and cut off the trip signal. If these 2 safety devices fail, the compressor should be stopped immediately. The rupture disc should be inspected at least weekly to ensure it does not rupture under pressure.
If the pressure level is too high, and overcurrent protection device cuts power to the motor. It also automatically shuts off the compressor when the hose ruptures or the air volume exceeds a preset level. The device should be installed on the air compressor to prevent accidents. Its job is to protect the operator from harm. If employees do not follow these safety measures, they may cause equipment damage.
To ensure safety when operating the air compressor, safety glasses and gloves should be worn. Pressurized air can cause eye injury, and crash goggles can provide a barrier to prevent this. Additionally, the self-retracting cord prevents trip hazards and reinforces excess cord. You should also keep your hands and body away from the air nozzle. This will prevent you from being sprayed with compressed air.

CFM Rating

An air compressor’s PSI and CFM ratings indicate the pressure and volume it can deliver. PSI stands for pounds per square inch and measures the force and pressure contained in 1 square inch of air. These 2 indicators are equally important when choosing an air compressor. If you need a lot of compressed air for a specific application, you will need a higher psi compressor. Likewise, if you are using compressed air in a smaller application, a low cfm compressor will not provide enough power to meet your needs.
When comparing different air compressors, be sure to pay close attention to horsepower and CFM ratings. While compressor power is essential for some tasks, it is not the most important aspect. The CFM rating of an air compressor will determine how big a project it can handle and how long it takes to charge. Make sure you understand the CFM and PSI ratings of your future compressors, as not knowing these important statistics can frustrate you and drive up costs.
In general, it is best to choose an air compressor with a CFM rating higher than the size of the air tool. This will ensure that the air compressor has enough pressure to work multiple tools efficiently at the same time. While smaller CFM ratings may be sufficient for smaller projects, larger tools such as drills require a lot of air. Therefore, the higher the CFM, the larger and more powerful the tool.
Once you understand the CFM of an air compressor, you can start looking for the right tool. You can check the CFM rating of your air compressor online by commenting below. If you’re not sure about the size of your air tool, you can always buy a second air compressor. This is a great way to double the CFM of your air compressor! You’ll have more air to do more work, and your compressor will last longer.
air-compressor

Lack of oil and lubrication

Oil-free air compressors have a smaller footprint and require less maintenance than oil-lubricated air compressors. Although oil-lubricated air compressors are more expensive and heavier than oil-free air compressors, they are also ideal for stationary use. The benefits of oil-free air compressors include greater durability and lower maintenance costs. The advantages and disadvantages of each type are discussed below.
Oil-free air compressors are generally quieter than oil-lubricated air compressors. However, you may still experience some noise while using it. To avoid this, you should choose a quiet intake compressor. However, if you work next to a noisy compressor, you should buy a muffler, an aftermarket filter that reduces compressor noise.
If you want to use the air compressor for a long time, the oil-free model is not the right choice. Its Teflon coating wears off over time, especially at extreme temperatures. Additionally, oil-free air compressors have a large number of moving parts that require regular maintenance, while oil-filled air compressors are great for those who don’t want to invest in extra parts.
Another major difference between oil-free and oil-lubricated air compressors is lubrication. Oil-lubricated air compressors require regular lubrication whereas oil-free air compressors are pre-lubricated. They have fewer parts and are cheaper. Oil-free air compressors are lighter than oil-lubricated air compressors. In addition to being more affordable, oil-free air compressors are more powerful and durable.
While oil-filled air compressors are more efficient and durable, they generate a lot of heat. However, they are also more expensive and require regular oil changes. Furthermore, they are difficult to transport. They also need to be permanently installed. These air compressors are also not portable and require a fixed location. So, consider your needs before deciding which type is best for you. When you’re choosing an air compressor for your business, be sure to shop around.
air-compressor

noise level

If you are wondering what the noise level of an air compressor is, the answer depends on your specific equipment and working environment conditions. Typically, air compressors produce 40 to 90 decibels of noise. Although the lower the decibel level, the quieter the compressor will be. Larger, more powerful air compressors produce higher noise levels than their little brothers. But no matter how big the air compressors are, it’s a good idea to wear hearing protection while working around them.
When purchasing a new air compressor, the noise level of the air compressor should be considered. While this may seem like a small problem, there are actually a lot of variations on these noisy machines. The most common type of air compressor is the reciprocating piston pump. This model uses pistons similar to an engine to rotate inside a chamber. The piston moves quickly and traps air proportional to its size. Single-piston air compressors are generally noisier than twin-piston models, also known as twin cylinders.
But even if you have the proper equipment to protect your hearing, it’s still important to know the noise level of an air compressor. Even if the noise is not immediately dangerous, it can still cause temporary or permanent hearing loss. This condition is called noise-induced hearing loss, and an air compressor with a sound level of 80 or higher can cause permanent hearing damage. You can avoid potential damage to your hearing and prevent accidents by simply paying attention to the noise level of your air compressor.
Air compressors are inherently noisy, but if you take steps to reduce their noise levels, you can minimize disruption to neighbors and co-workers. For example, installing a sound enclosure in your work area can prevent your air compressor from making as much noise as before. Depending on your workspace, you can also try installing a long air hose, which will reduce sound levels by up to 25%.
China Mini Split Solar Price Compressor Ducted Air Conditioner  China Mini Split Solar Price Compressor Ducted Air Conditioner

China R410A 9000-36000BTU with CZPT Compressor Hybrid Solar Powered Split Air Conditioner

Product Description

R410a 9000-36000Btu with CZPT compressor Hybrid Solar Powered split Air Conditioner

 

 

Product Details
When the power on, the compressor start working, it compress the refrigerant from low pressure to high pressure, low temperature to high temperature, then discharge to heat ex-changer of the solar collector,
In sunshine time ,the vacuum tube can absorb the sunshine to heat the water of the water tank, then the hot water will translate the heating to refrigerant by the ex-changer, then help the compressor heat the temperature and increase the pressure of the refrigerant again,so it  just need use the small compressor driver the system running, just use the less power to cool or heat the room,to save more energy.
 
Hybrid solar air-conditioner is driven by electricity and with solar energy as an auxiliary power.The 2 kinds of energy work complementally in accordance with principles of fluid dynamics. It combines the absorption working system with compression system by using environmental-friendly media in cooling and heating on the basis of traditional air-conditioner technology to achieve energy-saving and environment protection.
 
Product Introduction

(9000BTU-24000BTU) for Wall Mounted range. Up to 48000btu for Cassette,Ducted, Floor standing,Floor ceiling series.

  1. on Grid Working with 50% solar energy
  2. Supreme high efficiency rating reach to 4.0

     3.Fashion and Elegant Design, LED Display,Quiet Running
     4.Vacuum thermal tube solar collector ,with easy installation and affordable cost
     5. CZPT Compressor
     6. Blue Coating Heat Ex-changer (Better heat transfer effect)
     7.100% Copper Connection Pipes With Insulation
     8.Environmental Friendly Gas R410A   

Product Parameters 

Freon:R410            
Power Supply:220-240VAC, 1PH, 50/60Hz            
Performance            
 Capacity Cooling Btu/h 9000BTU 11500BTU 12000BTU 18000BTU
W 2600 3200 3500 5200
Heating Btu/h 10000 12000 13000 20000
W 2900 3500 3800 6000
Noise Indoor dB(A) ≤40 ≤42 ≤42 ≤44
Outdoor dB(A) ≤50 ≤52 ≤52 ≤54
Air Circulation m³/h 500 520 550 800
Suitable Area 11~17 13~21 15~23 26~36
EER W/W 3.84 3.72 3.89 3.83
Btu/h/w 12.42 12.69 13.27 13.07
Power Consumption            
Power Input Cooling W 650~770 780~940 800~1571 1100~1300
Heating W 650~780 780~950 800~1050 1150~1350
Rated Current Cooling A 3.00~3.60 3.55~4.27 3.70~4.80 6.30~7.30
Heating A 3.00~3.65 3.55~4.31 3.70~4.90 6.30~7.50
Vacuum Tube Diameter*Length*Pcs 47*520*10 47*520*10 47*520*10 47*620*11
Flat plate solar collector WXDXH 1000x550x90 1000x550x90 1000x550x90 1000x550x90
Dimensions            
Indoor Unit Net mm 775*265*210 775×265×210 775×265×210 985×300×220
Shipping mm 840*325*265 840×325×265 840×325×265 1080×380×300
Outdoor Unit Net mm 790*260*540 790*260*540 790*260*540 850*300*755
Shipping mm 910*370*610 910*370*610 910*370*610 950*410*760 
Water Tank Shipping mm 910*400*330 910*400*330 910*400*330 980*400*370
Vacuum Tube Shipping mm
Flat plate solar collector Shipping mm 1100x650x110 1100x650x110 1100x650x110 1100x650x110
Weight            
Indoor Unit Net/Gross kg 9/10.5 10/11.5 10/11.5 16/17.5
Outdoor Unit Net/Gross kg 31/34 36/38 38/40 50/52
Solar Collector Net/Gross kg 13/15 13/15 13/15 16/17
Loading Qty in 20feet sets 75 75 75 55
40HQ sets 175 175 175 125

 

Freon:R410          
Power Supply:220-240VAC, 1PH, 50/60Hz          
Performance          
 Capacity Cooling Btu/h 20000BTU 24000BTU 36000BTU
W 6000 7200 10000
Heating Btu/h 22000 27000 40000
W 6600 7900 11000
Noise Indoor dB(A) ≤46 ≤50 ≤52
Outdoor dB(A) ≤56 ≤58 ≤60
Air Circulation m³/h 850 1150 1350
Suitable Area 25~42 30~48 40~60
EER W/W 3.88 3.82 3.82
Btu/h/w 13.24 13.03 13.03
Power Consumption          
Power Input Cooling W 1350~1560 1700~1900 2400~2640
Heating W 1350~1590 1700~1950 2470~2650
Rated Current Cooling A 6.30~7.30 8.00~8.90 10.91~11.95
Heating A 6.30~7.50 8.00~8.90 11.23~12.05
Vacuum Tube Diameter*Length*Pcs 47*620*11 47*620*11 47*620*11
Flat plate solar collector WXDXH 1000x550x90 1000x550x90 900x500x80
Dimensions          
Indoor Unit Net mm 985×300×220 985×300×220 1080×320×240
Shipping mm 1080×380×300 1080×380×300 1150×420×320
Outdoor Unit Net mm 850*300*755 850*300*755 865*310*710
Shipping mm 950*410*760  950*410*760  1571*395*790
Water Tank Shipping mm 980*400*370 980*400*370 980*400*370
Vacuum Tube Shipping mm
Flat plate solar collector Shipping mm 1100x650x110 1100x650x110 950x550x90mm
Weight          
Indoor Unit Net/Gross kg 16/17.5 20/22 23/25
Outdoor Unit Net/Gross kg 50/52 55/58 65/70
Solar Collector Net/Gross kg 16/17 16/17 16/17
Loading Qty in 20feet sets 55 55 50
40HQ sets 125 125 115

Product Details Show:

Solar air conditioner projects:

Product Processing 

Product Packing  

 
Hot Products 

 
Why Choose Us?

1.Reply your inquiry in 24Hrs
2.Feedback of complaint in 24Hrs
3.OEM/ODM are accepted
4.Exclusive agents in local country are welcomed
5.Providing professional technical advice
6. Supergreen Tech Co.,Ltd, is a professional manufacturer of solar products such as Solar lights, Solar air conditioner, Solar refrigerators, Solar pest control lamp and so on.
With CE certification and several patent technology, making sure that we can provide all of our clients the best user friendly products!
 
FAQ:

Q1. Can I have a sample order for Solar air conditioner?
     Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
      Sample needs 7-20 days, mass production time needs 3-6 weeks. 
 
Q3. Do you have any MOQ limit for air conditioner order?
       Low MOQ, 1pc for sample checking is available
 
Q4. How do you ship the goods and how long does it take to arrive?
       We usually ship by Sea shipping. It usually takes around 1-2 months
 
Q5. How to proceed an order for solar air conditioner ?
       Firstly let us know your requirements or application.
       Secondly We quote according to your requirements or our suggestions.
       Thirdly customer confirms the samples and places deposit for formal order.
        Fourthly We arrange the production.
 
Q6. Is it OK to print my logo on air conditioner product?
      Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
 
Q7: Do you offer guarantee for the products?
      Yes,we offer 2-5 years warranty to our products.
 
Q8: How to deal with the faulty?
Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will repair them and resend them to you or provide the new parts to replace and ship with new containers. And we can discuss the solution including re-call according to real situation.
 
Welcome to work with us !
supergreensolar      
 

A Buyer’s Guide to Air Compressor Types

There are many types of Air Compressors, and it’s important to understand what each type has to offer. In this article, we’ll discuss single stage air compressors, low-noise compressors, and models with 2 pistons. But, before you buy an Air Compressor, be sure to read our buyer’s guide to the various types. This way, you’ll have all of the information you need to make the right decision for your business.
air-compressor

Single-stage air compressors

A single-stage air compressor is an excellent choice for most general-purpose purposes. They provide enough power to operate pneumatic tools, and they produce less heat. Single-stage air compressors, however, are not suitable for heavy-duty industrial uses. However, they can be used in various applications, including auto shops, gas stations, and various manufacturing facilities. They are also suitable for borewells and other high-pressure places.
These air compressors are a great choice for home use and are suitable for small-scale businesses, contractors, and small shops. These compressors have continuous duty cycles, cast iron compressor pumps, and a minimum 5,000-hour pump life. They also feature advanced features, including ODP motors, Auto Start & Controls, Receiver tanks, and power cords. They have low maintenance and can save you a great deal of money.
Single-stage air compressors are generally less expensive and lighter than their two-stage counterparts. Single-stage air compressors are also more portable, which is a plus for small projects. While two-stage compressors offer higher CFM, they are more powerful and bulky, making them unsuitable for small or home use. So it is essential to determine what you will use the air compressor for and decide on a model based on your needs.
A single-stage air compressor is made of a piston and a tank. The piston moves rapidly inside the cylinder and exerts pressure on the cylinder. This means that the piston can’t move any faster than the air pressure outside the cylinder. The piston is designed to operate in the same way for each stage. This is a great choice for home shops and one-man automotive shops, as it allows you to control the pressure without sacrificing the pump’s life.
Single-stage air compressors are often cheaper than two-stage versions, but they are not the best choice for every application. If you are only using your air compressor occasionally, you’ll find a one-stage model to be much more reliable than a two-stage model. The main difference between the 2 types of compressors is in the amount of air that each stage compresses. A two-stage air compressor will have more air storage capacity, but it will still produce more pressure.

Rotary vane compressors

Rotary vane compressors use a centrifugal pump to compress air. The rotor is set eccentrically in the housing, which almost touches the vane. As the rotor turns, the air that enters the pump is trapped between the vanes. This compressed air undergoes compression as the rotor rotates. Vanes are small pieces of carbon fiber or graphite composite. Vanes may be made of different materials depending on the application.
While rotary vane pumps are not commonly used to produce compressed air, they are widely used in automotive and hydraulic applications. Chances are, you have used a rotary vane pump at some point in your life. These pumps are also common in the vacuum and compressed air industries. As a result, many people don’t realize that they’re still around. They feature slots that allow the vanes to slide in and out of the rotor.
A rotary vane compressor has a drum and rotor inside. The rotor is eccentrically positioned and has slots and grooves on its surface. Its inlet and outlet ports are situated off-center, allowing the vanes to be pushed out by centrifugal force. Because the rotor rotates so quickly, air is trapped between the vanes. This air then becomes pressurized by the rotating rotor.
Rotating vane compressors can be easily serviced and repaired. A simple replacement of carbon vanes requires just 15 minutes and common tools. The carbon vanes typically last 9 to 18 months, depending on system operating pressure. Before purchasing a rotary vane compressor, make sure to check whether it has been properly performance-tested and has a warranty. Generally, warranties cover the rotor/stator chambers but do not cover the vanes or air filters. You should also check if the unit is covered by a lightning or water damage warranty.
Rotary vane compressors are an integral part of manufacturing industries. Many pharmaceutical manufacturing facilities depend on rotary vane compressors to control their equipment. Other industries that use rotary vane compressors include the plastics, woodworking, natural gas, and medical & dental fields. Their benefits are numerous and far outweigh any disadvantages of rotary screw compressors. For example, a rotary vane compressor can double the life of a conventional compressor.
air-compressor

Rotary vane compressors with low-noise models

If you are looking for a rotary vane air compressor, you have come to the right place. CZPT’s LV Series rotary vane compressors offer low-noise models, compact size, and robust integration. In addition to their low-noise features, they feature large filter systems to deliver high-quality compressed air. The LV Series models also feature CZPT’s reputation for reliability and quality.
This type of compressor uses centrifugal force to operate and is limited in its top and minimum operating speeds. They are only a third as powerful as screw compressors, and their top speed limits are much lower. Furthermore, the vanes wear out easily at high speeds because there is not enough centrifugal force to seal them against the cylinder’s edges. Even at half their full capacity, they consume as much as 80% of their total energy rating.
Because piston compressors produce a lot of noise, factory owners and shop owners have begun to install noise-dampening cabinets and other solutions. But, rotary vane compressors produce far less noise than a traditional vacuum, and the maintenance costs are also low. Rotary vane compressors are also extremely helpful in several industries. They are used in the automotive and auto finishing industries, as well as in dairy industries and milking machines.
If you have a deep pond, a rotary vane air compressor kit can pump up to 20 feet of water. This is more than enough airflow for 2 to 5 diffusers. A 1/4 HP rotary vane kit pumps around 4.2 CFM. It also helps to increase circulation and oxygen levels in the pond. Finally, a 1/4 HP kit offers the necessary power to clean up the bottom of a pond.
The rotary vane and rotary screw are the most popular air compressors today. While they are similar in many ways, they are more versatile and durable than their counterparts. They use fewer angular contact ball bearings and require less frequent maintenance than piston air compressors. Compared to piston air compressors, rotary vane and rotary screw compressors are quieter and are less expensive.
air-compressor

Rotary vane compressors with 2 pistons

The rotary vane and rotary screw compressors are similar in application, but both have different advantages and disadvantages. This article will compare the benefits of each and highlight the differences between them. While both are commonly used in industrial applications, rotary vane compressors are preferred by many industries. These compressors also have a wide range of uses, ranging from automotive air tool operation to milking machines. These compressors also have the advantage of being quieter than piston-powered ones.
The current common rail position may not be suitable for pressure swirl injectors, but new positions have been tested and show improvements in specific energy values. Moreover, the current position is not required for external oil pumps. However, mass induction and expulsion have to be performed with utmost care. This article focuses on the design and efficiency of rotary vane compressors. You can find more information about this new design in the references mentioned below.
The advantages of this type of compressor are its low cost, compact size, and easy maintenance. Hence, they are preferred in low capacity applications. Moreover, they feature integrated vanes. The rotating vanes close the air gap and compress air towards the outlet. Compared to piston-powered compressors, these units are cheaper and more reliable. Therefore, you should choose 1 with the lowest price tag. You can also opt for rotary vane compressors that are oil-free.
Sliding vane compressors are another popular variant. They have a single cylinder connected to the compressor and are capable of operating at low speeds. This design also reduces the amount of friction and maintains volumetric efficiency. However, the sliding vane compressors suffer from high frictional losses. If you are looking for a more efficient rotary compressor, this is the best option. While sliding vane compressors have been in the spotlight for over a century, they are still quite young.
These compressors are easy to install and maintain. They are also quieter than piston compressors. They are also cheaper than piston-driven compressors. The energy efficiency and low price make them the perfect choice for any commercial or industrial application. If you’re looking for a small, compact compressor, the rotary vane has been proven to be the best choice for your needs. You should know that it has a long service life.

China R410A 9000-36000BTU with CZPT Compressor Hybrid Solar Powered Split Air Conditioner  China R410A 9000-36000BTU with CZPT Compressor Hybrid Solar Powered Split Air Conditioner