Deskripsi Produk
Lini produksi wafer/waffle otomatis penuh
1perkenalan
Lini produksi wafer otomatis penuh dirancang dan diproduksi sesuai dengan fakta industri pembuatan biskuit dalam negeri dan menyerap lini produksi wafer paling terkenal dari banyak produsen luar negeri, yang memiliki fitur kinerja yang andal, struktur kompak, ruang yang kecil, hasil produksi tinggi, konsumsi energi rendah, perawatan yang mudah, dan pengoperasian yang sederhana.
Terdiri dari oven pemanggang, menara pendingin, mesin pemetik lembaran, mesin penyebar krim, lemari pendingin, mesin pemotong, pengaduk adonan, pengaduk krim, dan mesin penghancur.
Motor penggerak menggunakan merek SEW Jerman, sedangkan bantalan menggunakan merek CZPT Jerman. Sistem operasi menggunakan pemrograman PLC untuk mengotomatiskan proses dan memudahkan pengendalian.
2. Tata letak produksi
3. Bahan dan parameter(Model mesin yang berbeda akan memiliki parameter yang berbeda, hanya sebagai referensi))
1. Output: 28 lembar wafer per menit (berdasarkan resep wafer dasar)
2. Daya total: 42,41KW (380V, 50HZ)
3. Tingkat produk jadi: ≥95%
4. Tekanan pasokan gas: 0,02-0,04 kg/cm2
5. Konsumsi gas:
LPG: sekitar 27 kg/jam
Gas alam: sekitar 38 m³/jam
6. Nilai kompresi udara: 0,9M3/Menit/0,8MPA
7. Ukuran loyang: 470mm×325mm
8. Ukuran pemotongan efektif: 455mm × 315mm
9. Dimensi keseluruhan jalur (P×L×T): 28,0m×2,0m×2,5m
10. Berat keseluruhan lini produksi: sekitar 21 ton
11. Pekerja: 4 orang (tidak termasuk pekerja pengemasan)
12. Personel Pemasangan dan Pengoperasian: 1-2 orang
143. Waktu pemasangan: 2 minggu
14. Kontainer Pengiriman: 2×40'HQ
15. Waktu pengiriman: 90 hari setelah menerima uang muka
4 foto produk:
4. Nama Pesanan Daya (KW) Kuantitas
1.1 oven pemanggang datar 165,5 1
Penerima 2 lembar 0,18 2
3 menara pendingin 0 2
Mesin pengemas 4 lembar 0,36 2
5 pemasok lembaran intermiten 0,36 2
6 konveyor 0,18 1
7 lemari pelembap 7,5 1
Mesin pelapis krim 8 7.17 1
8.1 mesin pelapis pertama 1.5 1
8.2 kompresor semburan 1.1 1
8.3 detik lapisan 1.5 1
Penyortir komposit 9 lembar 0,12 1
Mesin laminasi bertenaga udara 10 0,75 1
11 konveyor masuk kabinet dingin 0,75 1
12 105METER freezer 12.258 1
13 unit pendingin air 1
14 Mesin pemotong mata gergaji putar 0,93 1
15 mesin penghancur 1
5 foto produk:
Pengenalan Perusahaan
Perusahaan kami dapat memproduksi lini produksi wafer otomatis termasuk mesin pemanggang terowongan, mesin pengemas lembaran, mesin menara pendingin, mesin penyebar krim, lemari pendingin, pengaduk krim, mesin pendistribusi, dan mesin lainnya, dengan banyak keunggulan seperti kinerja yang andal, hasil produksi tinggi, konsumsi daya rendah, perawatan yang mudah, pengoperasian yang sederhana, tidak menimbulkan polusi lingkungan, dll., dan mendapatkan reputasi yang baik dari pelanggan kami.
Penjualan luar negeri
Produk kami tidak hanya laris di pasar domestik, tetapi juga banyak diekspor ke berbagai negara di seluruh dunia, seperti Indonesia, Vietnam, Filipina, Bangladesh, Pakistan, Uzbekistan, Yordania, Aljazair, Rumania, Polandia, Finlandia, Turki, Suriah, Brasil, dan negara-negara lainnya.
Tujuan penjualan kami adalah memaksimalkan kepuasan pelanggan dan memperluas merek perusahaan. Kinerja teknis peralatan, kualitas, dan persyaratan pelanggan akan diperiksa dan dikelola secara ketat sebelum dipasarkan. Kami memiliki sistem layanan purna jual yang sempurna serta kelompok insinyur pengujian berpengalaman yang dapat memberikan layanan tepat waktu dan cepat untuk pemeliharaan peralatan, penggantian komponen, dan FAQ bagi pengguna.
6 Tanya Jawab
1. T: Apakah Anda produsen?
A: Ya, kami adalah pabrik yang khusus memproduksi lini produksi mesin pembuat wafer, mesin pelapis cokelat, lini produksi wafer bola, dan sebagainya. Produk kami dicirikan oleh kualitas tinggi, hemat energi, dan harga yang kompetitif. Saya pikir produk kami akan menemukan pasar di negara Anda.
2. T: Bagaimana cara Anda mengirimkan mesin wafer?
A: Biasanya melalui jalur laut, tetapi juga bisa sesuai dengan kebutuhan pelanggan.
3. T: Mengapa memilih kami?
A: –Kami adalah pemasok mesin makanan ringan terkemuka di Tiongkok.
1. Pemasok produk buatan China yang terkemuka.
2. Pemeriksaan apa pun sebelum pengiriman.
3. Kualitas terbaik & layanan terbaik dengan harga kompetitif.
5. T: Apakah tersedia berbagai pilihan bahasa untuk sistem operasi Anda?
A: Kami menggunakan sistem kontrol PLC, Motor SWE dari Jerman. Saya rasa produk kami akan memenuhi kebutuhan Anda. Kami akan sangat menghargai jika Anda dapat datang dan melihat bengkel kami.
How to Choose the Right Air Compressor
An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
Electric motor
While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with 2 digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
Oil bath
Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.
Start/stop control
An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
Variable speed drive
A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between 40 percent and 80 percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.
