Product Description
Introduction of Diesel Air Compressor Gas Compressor Screw Air Compressor Machines
LG-4.5/6 General Industrial Equipment Large Power Air Compressor is widely used for drilling applications such as drilling platforms, offshore oil platforms, refineries, chemical plants, gas station soil tanks, tunnel, ship and other inflammable and explosive places and ship building industries use.zmwn02
Parameter of Diesel Air Compressor Gas Compressor Screw Air Compressor Machines
Model | rotate speed(rpm) | Driven type | Power(kw) | Dir delivery(M3/min) | Pressure (Mpa) |
Weight (kg) |
Dimension(mm) |
LG-4.5/6 | 3400 | belt | 22 | 4.5 | 0.6 | 1000 | 1300*1100*1600 |
LG-3.5/8 | 2940 | 22 | 3.5 | 0.8 | 700 | 1080*880*1400 | |
LG-6.4/8 | 2940 | 37 | 604 | 0.8 | 1050 | 1600*950*1200 | |
LG-6.1/10 | 2940 | 45 | 601 | 1 | 1150 | 1250*1100*1650 | |
LG-5.8/13 | 2940 | 55 | 5.8 | 1.3 | 1150 | 1300*1100*1650 | |
LG-8/8 | 3200 | 45 | 8 | 0.8 | 1500 | 1800*1200*1550 | |
LG-7.6/10 | 3200 | 55 | 7.6 | 1 | 1500 | 1600*1000*1300 | |
LG-7.3-13 | 3200 | 65 | 7.3 | 1.3 | 1150 | 1300*1100*1550 |
Photos of Diesel Air Compressor Gas Compressor Screw Air Compressor Machines
Lubrication Style: | Lubricated |
---|---|
Cooling System: | Air Cooling |
Power Source: | AC Power |
Cylinder Position: | Angular |
Structure Type: | Closed Type |
Installation Type: | Movable Type |
Customization: |
Available
|
|
---|
What Is the Fuel Efficiency of Gas Air Compressors?
The fuel efficiency of gas air compressors can vary depending on several factors, including the compressor’s design, engine size, load capacity, and usage patterns. Gas air compressors typically use internal combustion engines powered by gasoline or propane to generate the mechanical energy required for compressing air. Here’s a detailed explanation of the factors that can influence the fuel efficiency of gas air compressors:
1. Engine Design and Size:
The design and size of the engine in a gas air compressor can impact its fuel efficiency. Engines with advanced technologies such as fuel injection and electronic controls tend to offer better fuel efficiency compared to older carbureted engines. Additionally, larger engines may consume more fuel to produce the required power, resulting in lower fuel efficiency compared to smaller engines for the same workload.
2. Load Capacity and Usage Patterns:
The load capacity and usage patterns of the gas air compressor play a significant role in fuel efficiency. Compressors operating at or near their maximum load capacity for extended periods may consume more fuel compared to compressors operating at lower loads. Additionally, compressors used intermittently or for lighter tasks may have better fuel efficiency due to reduced demand on the engine.
3. Maintenance and Tuning:
Proper maintenance and tuning of the gas air compressor’s engine can improve fuel efficiency. Regular maintenance tasks such as oil changes, air filter cleaning/replacement, spark plug inspection, and tuning the engine to the manufacturer’s specifications can help ensure optimal engine performance and fuel efficiency.
4. Operating Conditions:
The operating conditions, including ambient temperature, altitude, and humidity, can affect the fuel efficiency of gas air compressors. Extreme temperatures or high altitudes may require the engine to work harder, resulting in increased fuel consumption. Additionally, operating in humid conditions can affect the combustion process and potentially impact fuel efficiency.
5. Fuel Type:
The type of fuel used in the gas air compressor can influence its fuel efficiency. Gasoline and propane are common fuel choices for gas air compressors. The energy content and combustion characteristics of each fuel can affect the amount of fuel consumed per unit of work done. It is important to consider the specific fuel requirements and recommendations of the compressor manufacturer for optimal fuel efficiency.
6. Operator Skills and Practices:
The skills and practices of the operator can also impact fuel efficiency. Proper operation techniques, such as avoiding excessive idling, maintaining consistent engine speeds, and minimizing unnecessary load cycles, can contribute to improved fuel efficiency.
It is important to note that specific fuel efficiency ratings for gas air compressors can vary widely depending on the aforementioned factors. Manufacturers may provide estimated fuel consumption rates or fuel efficiency data for their specific compressor models, which can serve as a reference point when comparing different models or making purchasing decisions.
Ultimately, to maximize fuel efficiency, it is recommended to select a gas air compressor that suits the intended application, perform regular maintenance, follow the manufacturer’s guidelines, and operate the compressor efficiently based on the workload and conditions.
Can Gas Air Compressors Be Used for Gas Line Maintenance?
Gas air compressors can be used for certain aspects of gas line maintenance, primarily for tasks that require compressed air. Here’s a detailed explanation:
1. Clearing Debris and Cleaning:
Gas air compressors can be utilized to clear debris and clean gas lines. Compressed air can be directed through the gas lines to dislodge and remove dirt, dust, rust particles, or other contaminants that may accumulate over time. This helps maintain the integrity and efficiency of the gas lines.
2. Pressure Testing:
Gas line maintenance often involves pressure testing to ensure the lines can withstand the required operating pressures. Gas air compressors can provide the necessary compressed air to pressurize the lines for testing purposes. By pressurizing the gas lines with compressed air, technicians can identify any leaks or weaknesses in the system.
3. Leak Detection:
Gas air compressors can also be used in conjunction with appropriate leak detection equipment to identify and locate gas leaks in the gas lines. Compressed air can be introduced into the lines, and the detection equipment can then identify any areas where the compressed air escapes, indicating a potential gas leak.
4. Valve and Equipment Maintenance:
Gas line maintenance may involve the inspection, maintenance, or replacement of valves and associated equipment. Compressed air can be used to clean and blow out debris from valves, purge lines, or assist in the disassembly and reassembly of components.
5. Pipe Drying:
Gas air compressors can aid in drying gas lines after maintenance or repairs. By blowing compressed air through the lines, any residual moisture can be removed, ensuring the gas lines are dry before being put back into service.
6. Precautions and Regulations:
When using gas air compressors for gas line maintenance, it is essential to follow safety precautions and adhere to relevant regulations. Gas line maintenance often involves working in hazardous environments, and proper training, equipment, and procedures must be followed to ensure the safety of personnel and the integrity of the gas system.
It is important to note that gas air compressors should not be used directly for pressurizing or transporting natural gas or other combustible gases. Gas line maintenance tasks involving gas air compressors primarily focus on using compressed air for specific maintenance and testing purposes, as outlined above.
In summary, gas air compressors can be useful for certain aspects of gas line maintenance, including clearing debris, pressure testing, leak detection, valve and equipment maintenance, and pipe drying. However, it is crucial to follow safety guidelines and regulations when working with gas lines and compressed air to ensure the safety and integrity of the gas system.
What Are the Advantages of Using a Gas Air Compressor Over an Electric One?
Using a gas air compressor offers several advantages over an electric air compressor. Gas-powered compressors provide unique benefits in terms of mobility, versatility, power, and convenience. Here’s a detailed explanation of the advantages of using a gas air compressor:
1. Portability and Mobility:
Gas air compressors are typically more portable and mobile compared to electric compressors. They often feature handles, wheels, or trailers, allowing for easy transportation to different locations. This portability is especially advantageous in situations where compressed air is needed at remote job sites, outdoor events, or areas without access to electricity. Gas air compressors can be easily moved and positioned where they are required.
2. Independence from Electricity:
One of the primary advantages of gas air compressors is their independence from electricity. They are powered by gas engines, which means they do not rely on a direct connection to the electrical grid. This makes them suitable for use in areas where electrical power is limited, unreliable, or unavailable. Gas air compressors offer a reliable source of compressed air even in remote locations or during power outages.
3. Versatility in Fuel Options:
Gas air compressors provide versatility in terms of fuel options. They can be powered by various types of combustible gases, including gasoline, diesel, natural gas, or propane. This flexibility allows users to choose the most readily available or cost-effective fuel source based on their specific requirements. It also makes gas compressors adaptable to different environments and fuel availability in various regions.
4. Higher Power Output:
Gas air compressors typically offer higher power output compared to electric compressors. Gas engines can generate more horsepower, allowing gas compressors to deliver greater air pressure and volume. This higher power output is beneficial when operating pneumatic tools or equipment that require a significant amount of compressed air, such as jackhammers, sandblasters, or heavy-duty impact wrenches.
5. Continuous Operation:
Gas air compressors can provide continuous operation without the need for frequent breaks or cooldown periods. Electric compressors may overheat with prolonged use, requiring intermittent rest periods to cool down. Gas compressors, on the other hand, can operate continuously for longer durations without the risk of overheating. This continuous operation capability is particularly advantageous in demanding applications or situations that require extended periods of compressed air usage.
6. Quick Startup and Response:
Gas air compressors offer quick startup and response times. They can be started instantly by simply pulling a cord or pressing a button, whereas electric compressors may require time to power up and reach optimal operating conditions. Gas compressors provide immediate access to compressed air, allowing for efficient and prompt task completion.
7. Durability and Resistance to Voltage Fluctuations:
Gas air compressors are generally more durable and resistant to voltage fluctuations compared to electric compressors. Electric compressors can be affected by voltage drops or surges, which may impact their performance or cause damage. Gas compressors, however, are less susceptible to voltage-related issues, making them reliable in environments where voltage fluctuations are common.
8. Lower Energy Costs:
Gas air compressors can offer lower energy costs compared to electric compressors, depending on the price of the fuel being used. Gasoline or diesel fuel, for example, may be more cost-effective than electricity in certain regions or applications. This cost advantage can result in significant savings over time, especially for high-demand compressed air operations.
Overall, the advantages of using a gas air compressor over an electric one include portability, independence from electricity, fuel versatility, higher power output, continuous operation capability, quick startup and response times, durability, resistance to voltage fluctuations, and potentially lower energy costs. These advantages make gas air compressors a preferred choice in various industries, remote locations, and applications where mobility, power, and reliability are crucial.
editor by CX 2023-09-26
China Screw Air Compressor Price Mini Screw Air Compressor Machines mini air compressor
Solution Description
Characteristics of Screw Air Compressor Price Mini Screw Air Compressor Machines
Skid Mounted Type Screw Air Compressor pushed by diesel motor for mining undertaking, quarry internet site, blast hole has the adhering to advantages:
01.Cummins or Yuchai engines.zmwm02
02.Automatic control and protection system.
03. Error free capacity control.
04.Delu*e micro-computer florescence control panel.
05.All weather models for high altitude operations (ZEGA only customization available for above 5500m high altitude applications)
06.High quality filtration system with safety filters.
Technical Specification of Screw Air Compressor Price tag Mini Screw Air Compressor Devices
Design | Nominal Pressure (Mpa) |
F.A.D (Free Air Delivery) (m3/min) |
Oil Content Sppm |
Motor Power kW ( HP ) |
Excess weight (net e*cl.fuel) (kg) |
Proportions(total), L*W*H(mm) |
42SCG-seven | .seven | 4 | <6 | 42(65) | 730 | 2110*1500*1620 |
58SCG-8 | .8 | seven | <6 | fifty eight(eighty) | 1450 | 2200*1440*1600 |
110SCG-8 | .eight | twelve | <6 | a hundred and ten(one hundred fifty) | 2571 | 2750*1630*2571 |
139SCG-thirteen | 1.3 | 15 | <6 | a hundred and forty(180) | 2300 | 3240*1700*1730 |
178SCG-14.5 | 1.45 | 17 | <6 | 179(240) | 3090 | 3300*1970*2270 |
180SCG-fourteen.five | 1.forty five | 17 | <6 | 179(240) | 3090 | 3300*1970*2270 |
177SCG-17 | one.seven | 16 | <6 | 179(240) | 3420 | 3300*1970*2270 |
188SCG-17 | one.7 | eighteen | <6 | 191(260) | 3310 | 3300*1970*2270 |
191SCG-17(Highland) | 1.7 | 18 | <6 | 191(260) | 3450 | 3300*1970*2270 |
195SCG-19 | one.9 | 19 | <6 | 195(260) | 3490 | 3300*1970*2270 |
250SCG-17 | 1.seven | 22 | <6 | 250(340) | 4320 | 3660*2000*2500 |
288SCG-22 | 2.2 | 27 | <6 | 288(380) | 4460 | 3660*2000*2500 |
406SCG-25 | two.5 | 33 | <6 | four hundred(525) | 5800 | 4600*22 |
Images of Screw Air Compressor Price tag Mini Screw Air Compressor Equipment
Lubrication Style: | Lubricated |
---|---|
Cooling System: | Air Cooling |
Power Source: | AC Power |
Cylinder Position: | Angular |
Structure Type: | Closed Type |
Installation Type: | Movable Type |
###
Customization: |
Available
|
---|
###
Model | Nominal Pressure (Mpa) |
F.A.D (Free Air Delivery) (m3/min) |
Oil Content Sppm |
Motor Power kW ( HP ) |
Weight (net e*cl.fuel) (kg) |
Dimensions(overall), L*W*H(mm) |
42SCG-7 | 0.7 | 4 | <6 | 42(65) | 730 | 2110*1500*1620 |
58SCG-8 | 0.8 | 7 | <6 | 58(80) | 1450 | 2200*1440*1600 |
110SCG-8 | 0.8 | 12 | <6 | 110(150) | 2010 | 2750*1630*2020 |
139SCG-13 | 1.3 | 15 | <6 | 140(180) | 2300 | 3240*1700*1730 |
178SCG-14.5 | 1.45 | 17 | <6 | 179(240) | 3090 | 3300*1970*2270 |
180SCG-14.5 | 1.45 | 17 | <6 | 179(240) | 3090 | 3300*1970*2270 |
177SCG-17 | 1.7 | 16 | <6 | 179(240) | 3420 | 3300*1970*2270 |
188SCG-17 | 1.7 | 18 | <6 | 191(260) | 3310 | 3300*1970*2270 |
191SCG-17(Highland) | 1.7 | 18 | <6 | 191(260) | 3450 | 3300*1970*2270 |
195SCG-19 | 1.9 | 19 | <6 | 195(260) | 3490 | 3300*1970*2270 |
250SCG-17 | 1.7 | 22 | <6 | 250(340) | 4320 | 3660*2000*2500 |
288SCG-22 | 2.2 | 27 | <6 | 288(380) | 4460 | 3660*2000*2500 |
406SCG-25 | 2.5 | 33 | <6 | 400(525) | 5800 | 4600*22 |
Lubrication Style: | Lubricated |
---|---|
Cooling System: | Air Cooling |
Power Source: | AC Power |
Cylinder Position: | Angular |
Structure Type: | Closed Type |
Installation Type: | Movable Type |
###
Customization: |
Available
|
---|
###
Model | Nominal Pressure (Mpa) |
F.A.D (Free Air Delivery) (m3/min) |
Oil Content Sppm |
Motor Power kW ( HP ) |
Weight (net e*cl.fuel) (kg) |
Dimensions(overall), L*W*H(mm) |
42SCG-7 | 0.7 | 4 | <6 | 42(65) | 730 | 2110*1500*1620 |
58SCG-8 | 0.8 | 7 | <6 | 58(80) | 1450 | 2200*1440*1600 |
110SCG-8 | 0.8 | 12 | <6 | 110(150) | 2010 | 2750*1630*2020 |
139SCG-13 | 1.3 | 15 | <6 | 140(180) | 2300 | 3240*1700*1730 |
178SCG-14.5 | 1.45 | 17 | <6 | 179(240) | 3090 | 3300*1970*2270 |
180SCG-14.5 | 1.45 | 17 | <6 | 179(240) | 3090 | 3300*1970*2270 |
177SCG-17 | 1.7 | 16 | <6 | 179(240) | 3420 | 3300*1970*2270 |
188SCG-17 | 1.7 | 18 | <6 | 191(260) | 3310 | 3300*1970*2270 |
191SCG-17(Highland) | 1.7 | 18 | <6 | 191(260) | 3450 | 3300*1970*2270 |
195SCG-19 | 1.9 | 19 | <6 | 195(260) | 3490 | 3300*1970*2270 |
250SCG-17 | 1.7 | 22 | <6 | 250(340) | 4320 | 3660*2000*2500 |
288SCG-22 | 2.2 | 27 | <6 | 288(380) | 4460 | 3660*2000*2500 |
406SCG-25 | 2.5 | 33 | <6 | 400(525) | 5800 | 4600*22 |
Choose an Air Compressor for Your Business
There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
Positive displacement
Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are two different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
Single-stage
The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only one cylinder, which means one stroke is required to move air from one cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the one with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have one air intake, and two-stage air compressors have two air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
low noise
Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The two water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers two models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and two universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
editor by czh 2022-12-13
China 13bar/16bar, 11kw~75kw Variable Speed Integrated Screw Air Compressor with Air Dryer, Tank and 2 Filters for Laser Cutting Machines
Product Description
11kw 15hp CZPT Screw Air Compressor With Air Tank And Dryer
Our products are widely used in power generation, semiconductor, shipbuilding, oil field, rubber, food, pharmacy, package, electronic, communication, cement, glasses, chemical, textile, papermaking, gas, and oil refining, etc.
Features Of Tank Mounted Screw Air Compressor
How can a compressed air system help you increase profitability? The answer is really pretty simple: by ensuring that you achieve the highest productivity in your shop while reducing the total cost of ownership to the absolute lowest levels.
Exceptional Value
1. Ultimate Reliability
• AirHorse is so confident in the performance of these compressors, that we offer a choice of extended warranty packages designed to provide you with maximum operating security.
• Smart integration eliminates leaks and pressure drops, ensuring maximum reliability.
2. Ultimate Efficiency
• Delivers more air for less horsepower, saving thousands of dollars per year on energy
• Eliminates wasteful unloaded running by cycling the compressor on/off.
3. Ultimate Flexibility
• With a simplified, easy to maintain the structure and with long-life components, trouble-free operation is provided
Compact machine design provides minimum working space
Smart Integration
1. A Revolutionary Advancement
Going far beyond combining the compressor, dryer, and filters in 1 package, smart integration also:
• Eliminates vulnerable interconnecting piping
• Minimizes pressure losses and drops
• Integrates the compressor, dryer, and filter into an energy-reducing, optimized system
• Incorporates the entire supply-side system into 1 whisper-quiet package, enabling installation virtually anywhere
• Provides generous space to promote cooling and to allow unobstructed service
2. Dry and Clean Compressed Air
The Right Air Quality to Do the Job
• All Total Air System packages come fully equipped with an integral, energy-saving air treatment center including a high-performance air dryer and filtration pack to remove water, oil, and particles from the air stream.
• All components are perfectly matched to deliver the right air quality to increase air-powered tools and system equipment life.
3. High-efficiency Components
Setting the Standard in System Design
The Total Air System incorporates only the highest quality components to ensure that both system efficiency and productivity are maximized– a high-efficiency compressor room without the hassle, complexity, and costs of the traditional compressor room. Total Air System packages come fully equipped with:
• A high-efficiency rotary screw air compressor
• An energy-saving cycling refrigerated air dryer
• A high-efficiency coalescing filter
• A high-efficiency particulate filter
• An integral air receiver storage tank
• Integrated compressor and dryer controls
• Low-pressure drop piping
4 Lifetime benefits
(Benefits are virtually endless )
• Plug-and-play simplicity–eliminates the leading causes of failure in air systems: incorrect sizing and installation
• Virtually no install costs–eliminates 80% of install time, material and costs
• Integral packaging saves valuable floor space for other uses.
• Lifetime power savings through highly efficient components
• Increased productivity through better air quality-Eliminates water and corrosion resulting in extended tool and equipment life
AirHorse Screw Air Compressor (with tank and dryer) | |||||||||||
Model | Motor power | Free air deliver | Discharge pressure | Noise level | Lubricant oil | Tank volume | Electricity | Weight | Size | ||
(KW) | (HP) | (m3/min) | CFM | (MPa) | (dB) | (L) | (L) | (V/ph/Hz) | (KG) | (mm) | |
AH-7 | 5.5 | 7.5 | 0.85 | 30 | 0.7 | 53-57 | 5.4 | 3 Our Service After-sale Service • Any questions or requests before, during, or after sales, we would like to help you any time and will find you the best solution in 24 hours. • Warranty: One year for the whole machine Genuine spare parts will be provided with the best price. • Overboard engineer service is available.
Special Customized Service 1) Full OEM • Quantity: at least 5 pcs • In this plan, we will do all the changes (Color, nameplate, and logo) as your need, and will not charge an extra fee. 2) Half OEM • Quantity: no limit • Under this program, we can make the necessary alteration (nameplate and logo) but we will charge some extra fee for the nameplate, as the nameplate factory has the MOQ. 3) Logo OEM • Quantity: no limit • Only the logo will be changed to yours, and no extra fee will be charged.
Overseas Engineer Service • We are available to send our engineer for an aboard service. Only need you to arrange the accommodation, transportation, and translator. The extra cost for each will be discussed based on the local price level. FAQ Q1: Are you a factory or trade company?
Q2: What the exact address of your factory?
Q3: Warranty terms of your machine?
Q4: Will you provide some spare parts of the machines?
Q5: What about the product package?
Q6: What about the voltage of products?
Q7: Which payment term can you accept?
Q8: How long will you take to arrange production?
Q9: Can you accept OEM orders?
Q10: Which trade term can you accept?
What to Look For When Buying an Air CompressorAn air compressor is a very useful tool that can help you complete many different types of construction jobs. This handy machine makes many tasks much easier, but not all of them are created equally. Understanding what to look for when buying an air compressor will help you make an informed decision. Here are some of the things you should look for. These include price, size, and energy efficiency. Also, make sure to consider the air compressor’s type. Single-stage air compressors are quieterWhen it comes to noise level, single-stage air compressors are the way to go. These machines have fewer moving parts and are quieter than two-stage models. Single-stage air compressors use an axial flow design and can be quieter than their dual-stage counterparts. Single-stage air compressors can run longer and at lower pressures. Single-stage air compressors can be used for light industrial applications. They have a long life expectancy, with some models lasting for over 3 thousand hours. Two-stage air compressors are more energy efficientTwo-stage air compressors are more energy-efficient than single-stage machines. The efficiency of two-stage air compressors is increased through a combination of improved efficiency and increased longevity. These machines can store more air and have higher compression ratios. One model of a two-stage compressor can hold approximately 83 cubic feet of air at 100 PSI and 120 cubic feet at 150 PSI. A two-stage compressor is also quieter. Piston-driven air compressors are quieterA piston-driven air compressor is 1 of the quietest types of air compressors. It is less noisy than reciprocating air compressors. A piston-driven air compressor can reach 62 decibels, while a scroll compressor is around half that volume. The 2 main components of a scroll air compressor are the piston and the helical screw. These air compressors are both very efficient and quiet. Oil-lubricated air compressors are more cost-effectiveThere are several reasons why oil-lubricated air compressors are more expensive than dry-type air compressors. First of all, oil-lubricated air compressors tend to be more reliable and quiet. Additionally, oil-lubricated air compressors require fewer parts and can last longer than dry-type air compressors. These are just a few of the many benefits of using oil-lubricated air compressors. |