产品描述
| 产品名称 | Oil-Free Booster Compressor |
| Model No | BW-3/5/10/15/20/30… |
| 入口压力 | 0.4Mpa( G ) |
| Exhaust Pressure | 150/200Mpa( G ) |
| 类型 | High Pressure Oil Free |
| Accessories | Filling Manifold, Piston ring, Etc |
| Oilless High Pressure O2 Compressor Specification | |||||
| 不 | Volume | 入口压力 | 出口压力 | 类型 | Cooling type |
| 1 | 1-3m³ | 0.3-0.4MPa | 15MPa | 2 lines 4 stages vertical type | Wind |
| 2 | 4-12m³ | 0.3-0.4MPa | 15MPa | 2 lines 4 stages vertical type | Wind |
| 3 | 13-40m³ | 0.3-0.4MPa | 15MPa | 3 lines 3 stages W type | 水 |
| 4 | 13-60m³ | 0.2-0.4MPa | 15MPa | 2 lines 4 stages vertical type | 水 |
| 5 | 40-80m³ | 0.2-0.4MPa | 15MPa | 4 lines 4 stages S type | 水 |
| 6 | 80-120m³ | 0.2-0.4MPa | 15MPa | 4 lines 4 stages S type | 水 |
If you have compressor inquiry please tell us follows information when you send inquiry:
*Compressor working medium: If single gas ,how many purity ? if mixed gas , what’s gas content lit ?
*Suction pressure(gauge pressure):_____bar
*Exhaust pressure(gauge pressure):_____bar
*Flow rate per hour for compressor: _____Nm³/h
Compressor gas suction temperature:_____ºC
Compressor working hours per day :_____hours
Compressor working site altitude :_____m
Environment temperature : _____ºC
Has cooling water in the site or not ?______
Voltage and frequency for 3 phase :____________
Do not has water vapor or H2S in the gas ?______
Application for compressor?__________
| 售后服务： | 1 年 |
|---|---|
| 保修单： | 1 年 |
| Cooling Method: | Air Cooling Water Cooling |
| Keywords: | Oil-Free Oxygen Booster |
| 应用： | Filling Cylinder |
| 气体类型： | Oxygen,Nitrogen,Special Gas |
| 定制化： |
可用的
|
|
|---|
.webp "China best Various Specifications Factory Price Compressor for Oxygen air compressor price")
Can Gas Air Compressors Be Used for High-Pressure Applications?
Gas air compressors can be used for high-pressure applications, but there are certain considerations to keep in mind. Here’s a detailed explanation:
Gas air compressors are available in various sizes and configurations, and their suitability for high-pressure applications depends on factors such as the compressor’s design, power output, and the specific requirements of the application. Here are some key points to consider:
1. 压缩机设计：
Not all gas air compressors are designed to handle high-pressure applications. Some compressors are specifically built for low-to-medium pressure ranges, while others are designed to deliver higher pressure outputs. It is important to select a gas air compressor model that is rated for the desired pressure range. The compressor’s specifications and manufacturer’s guidelines will provide information on the maximum pressure it can generate.
2. 功率输出：
The power output of a gas air compressor is a crucial factor in determining its suitability for high-pressure applications. High-pressure compressors require more power to achieve and sustain the desired pressure levels. It is important to ensure that the gas air compressor has sufficient power output to meet the demands of the specific high-pressure application.
3. Cylinder Configuration:
The cylinder configuration of the gas air compressor can also affect its ability to handle high-pressure applications. Compressors with multiple cylinders or stages are designed to generate higher pressures compared to compressors with a single cylinder. Multi-stage compressors compress the air in multiple steps, allowing for higher pressure ratios.
4. 安全注意事项：
High-pressure applications require careful attention to safety considerations. Gas air compressors used for high-pressure applications should be equipped with appropriate safety features such as pressure relief valves, pressure gauges, and safety shut-off systems. It is crucial to follow all safety guidelines and regulations to ensure safe operation.
5. Maintenance and Inspection:
Regular maintenance and inspection are essential for gas air compressors used in high-pressure applications. High-pressure operation can put additional stress on the compressor components, and proper maintenance helps ensure optimal performance and safety. Regular inspections and adherence to maintenance schedules will help identify and address any potential issues before they become major problems.
6. Application-specific Considerations:
Each high-pressure application may have specific requirements and considerations. It is important to evaluate factors such as the required pressure level, duty cycle, flow rate, and any specific environmental conditions that may impact the performance of the gas air compressor. Consulting with the compressor manufacturer or a qualified professional can help determine the suitability of a gas air compressor for a particular high-pressure application.
In summary, gas air compressors can be used for high-pressure applications, provided that they are designed, rated, and configured appropriately. It is essential to consider factors such as compressor design, power output, safety features, maintenance requirements, and application-specific considerations to ensure safe and reliable operation at high pressures.
.webp "China best Various Specifications Factory Price Compressor for Oxygen air compressor price")
What Are the Key Components of a Gas Air Compressor Control Panel?
A gas air compressor control panel typically consists of several key components. Here’s a detailed explanation:
1. Power Switch:
The power switch allows the operator to turn the compressor on or off. It is usually a toggle switch or a push-button switch located on the control panel.
2. Pressure Gauges:
Pressure gauges display the compressed air pressure at different stages of the compression process. Commonly, there are two pressure gauges: one to measure the incoming air pressure (suction pressure) and another to measure the outgoing compressed air pressure (discharge pressure).
3. Control Knobs or Buttons:
Control knobs or buttons are used to adjust and set various parameters of the compressor operation. These controls may include pressure settings, on/off timers, automatic start/stop functions, and other operational parameters specific to the compressor model.
4. Emergency Stop Button:
An emergency stop button is a critical safety feature that immediately shuts down the compressor in case of an emergency. Pressing the emergency stop button cuts off power to the compressor and stops its operation.
5. Motor Start/Stop Buttons:
Motor start and stop buttons allow the operator to manually start or stop the compressor motor. These buttons are used when manual control of the motor is required, such as during maintenance or troubleshooting.
6. Control Indicators:
Control indicators include various lights or LEDs that provide visual feedback about the compressor’s status and operation. These indicators may include power indicators, motor running indicators, pressure indicators, and fault indicators to signal any malfunctions or abnormal conditions.
7. Control Panel Display:
Some gas air compressors feature a control panel display that provides real-time information and feedback on the compressor’s performance. The display may show parameters such as operating pressure, temperature, maintenance alerts, fault codes, and other relevant information.
8. Start/Stop Control Circuit:
The start/stop control circuit is responsible for initiating and controlling the motor start and stop sequences. It typically includes relays, contactors, and other electrical components that enable the control panel to safely start and stop the compressor motor.
9. Safety and Protection Devices:
Gas air compressor control panels may incorporate safety and protection devices to safeguard the compressor and prevent potential damage or hazardous situations. These devices can include overload relays, thermal protection, pressure relief valves, and other safety features.
10. Control Panel Enclosure:
The control panel enclosure houses and protects the electrical components and wiring of the control panel. It provides insulation, protection from dust and moisture, and ensures the safety of the operator.
In summary, a gas air compressor control panel typically includes a power switch, pressure gauges, control knobs or buttons, emergency stop button, motor start/stop buttons, control indicators, control panel display (if applicable), start/stop control circuit, safety and protection devices, and a control panel enclosure. These components work together to monitor and control the compressor’s operation, ensure safety, and provide essential information to the operator.
.webp "China best Various Specifications Factory Price Compressor for Oxygen air compressor price")
哪些行业常用气体空气压缩机？
气体空气压缩机广泛应用于各个行业，在这些行业中，压缩空气对于驱动工具、设备和系统至关重要。这些压缩机因其便携性、多功能性和提供高压空气的能力而备受青睐。以下详细介绍气体空气压缩机的常见应用行业：
1. 建筑行业：
建筑行业广泛使用燃气空气压缩机来完成各种任务。压缩空气用于驱动气动工具，例如风镐、射钉枪、冲击扳手和混凝土破碎机。燃气空气压缩机提供这些工具高效运行所需的必要气流和压力，使其成为建筑工地的理想选择。
2. 采矿业：
在采矿业中，气体空气压缩机在各种作业中发挥着至关重要的作用。压缩空气用于驱动气动工具进行钻孔、爆破和挖掘。它还应用于矿井的通风系统、输送系统和气动控制装置。气体空气压缩机因其耐用性和在崎岖偏远矿区环境中运行的能力而备受青睐。
3. 石油和天然气行业：
石油和天然气行业在众多应用中都依赖气体空气压缩机。它们用于钻井作业、驱动气动工具以及维持油气管道的压力。气体空气压缩机也广泛应用于天然气加工厂、炼油厂和石化设施的各种气动工艺和设备中。
4. 制造业和工业部门：
在制造业和工业领域，气体空气压缩机被广泛应用于各种场合。它们为气动工具提供压缩空气，例如气动钻、砂光机、研磨机和喷枪。压缩空气还用于物料搬运、装配线作业和气动控制系统等制造过程中。
5. 汽车行业：
汽车行业广泛使用气体空气压缩机来完成各种任务。在汽车装配厂，压缩空气用于驱动气动工具、喷漆房和气动控制系统。在汽车维修车间，气体空气压缩机也用于驱动气动工具、轮胎充气和操作气动升降机。
6. 农业和耕作：
燃气空气压缩机在农业领域有着广泛的应用。它们可用于驱动气动工具进行作物灌溉、操作气动播种机或种植机，以及为农场维护和维修工作提供压缩空气。便携式燃气空气压缩机在电力供应可能不便的农业环境中尤为实用。
7. 食品饮料行业：
在食品饮料行业，气体空气压缩机广泛应用于各种气动工艺和设备中。它们用于食品包装、原料和成品的气动输送系统以及气动混合和搅拌工艺。该行业的气体空气压缩机在设计时均符合严格的卫生和安全标准。
8. 制药和医疗保健行业：
制药和医疗保健行业在关键应用中大量使用气体空气压缩机。压缩空气广泛应用于医疗器械、牙科设备、实验室仪器和药品生产过程中。该行业的气体空气压缩机必须符合严格的质量标准，并保持空气纯度。
以上仅列举了几个常用气体空气压缩机的行业。其他行业，例如发电、航空航天、船舶和化工等，也依赖气体空气压缩机进行特定应用。气体空气压缩机的多功能性和可靠性使其在众多压缩空气至关重要的行业中不可或缺。
editor by CX 2023-10-20