产品描述
公司简介
we have hydrogen production compressors, filling compressors, and hydrogen refueling station compressors to achieve full coverage of hydrogen energy compressors, one-stop supply and service. The displacement of a single hydrogen production compressor can reach 2000Nm3/min, the displacement of a single filling compressor can reach 2000Nm3/h, and the displacement of a single compressor at a hydrogen refueling station can reach 2000Nm3/h, fully covering compressors in the hydrogen energy industry need.
产品描述
Piston compressors are a type of positive displacement compressor that are commonly used in the chemical industry for a variety of applications. These compressors work by using a piston and cylinder to compress gas or air, which creates pressure and allows it to be transported through pipelines or used in other processes.
In the chemical industry, piston compressors are used for a variety of functions, including:
Gas compression – Piston compressors are used to compress natural gas, hydrogen, and other gases used in chemical processes.
Pneumatic conveying – Piston compressors are used to transport materials in a powdered or granular form through pipelines.
Refrigeration – Piston compressors are used in refrigeration systems to compress refrigerant gases, which are then used to cool industrial processes and equipment.
Process air compression – Piston compressors are used to compress air for use in chemical processes, such as in pneumatic equipment and air-powered tools.
Piston compressors are popular in the chemical industry because they are reliable, efficient, and can handle specific types of gases and air with ease. Additionally, they require minimal maintenance and can operate at high pressures, making them suitable for many applications
When choosing a piston compressor for use in the chemical industry, it is important to consider factors such as:
Type of gas or air being compressed – Different types of gases and air require different types of compression.
Required flow rate and pressure – The capacity and pressure capabilities of the compressor must meet the requirements of the application.
Environmental conditions – Factors such as temperature, humidity, and altitude can affect the performance of the compressor.
Maintenance requirements – The frequency and complexity of maintenance and servicing should be considered when selecting a compressor.
Overall, piston compressors are an important tool in the chemical industry, providing reliable and efficient compression for a variety of applications. Choosing the right compressor for the specific application is critical to ensuring optimal performance and efficiency.
产品参数
The machine is customized according to customer need, the specific price depends on the configuration requirements (gas composition, exhaust volume and pressure).quotation will be given according the specific parameters.
| Hydrogen gas production compressor | |||||
| parameter industry | hydrogen from natural gas | Hydrogen from coke oven gas | Chemical tail gas recovery | Fluorine alkali tail gas recovery | other |
| Suction pressure MPa(G) | 0-0.5 | 0-0.2 | 0-1.0 | 0-0.1 | |
| discharge pressureMPa(G) | 1.0-3.0 | 0.8-2.3 | 1.5-3.0 | 0.8-2.5 | |
| capacity Nm3/min | 5-50 | 10-200 | 10-200 | 8-100 | |
| Compression levels | 1-3 | 1-4 | 1-6 | 1-5 | 1-6 |
| motor power(KW) | 30-2000 | ||||
| skid mounted | skid mounted | ||||
| Digital Analog Computing | yes | ||||
| systolic algorithm | yes | ||||
| Service Guarantee | Professional service team, 7X24 hours all day service | ||||
| Hydrogen filling compressor + hydrogen refueling station compressor | |||||
| parameter industry | 45Mpahydrogen refueling station | 90Mpa hydrogen refueling station | Hydrogen tank truck | Hydrogen flushed into the bottle | High pressure hydrogen delivery |
| Suction pressure MPa(G) | 3-20 | 10-30 | 0.8-3.0 | 0.1-30 | 0.8-3.0 |
| discharge pressureMPa(G) | 45 | 90 | 20.0-22.20 | 15.0-20.0 | 5.2-20.0 |
| capacity Nm3/min | 200-2000 | 100-1000 | 300-2000 | 10-800 | 100-1500 |
| Compression levels | 1-2 | 1-2 | 1-3 | 1-2 | 1-2 |
| motor power(KW) | 30-200 | 30-185 | 75-315 | 3-160 | 22-200 |
| skid mounted | skid mounted | ||||
| Digital Analog Computing | yes | ||||
| Finite Element Analysis | yes | ||||
| Service Guarantee | Professional service team, 7X24 hours all day service | ||||
详细照片
| 售后服务： | 12 Month |
|---|---|
| 保修单： | 12 Month |
| 润滑方式： | 无油 |
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
运费：
每件商品预计运费。 |
关于运费和预计送达时间。 |
|---|
| 付款方式： |
|
|---|---|
|
首付款 全额付款 |
| 货币： | US$ |
|---|
| 退货和退款： | 您可以在收到产品后 30 天内申请退款。 |
|---|
.webp "China manufacturer High Pressure 320bar Hydrogen Gas Piston Diaphragm Compressor air compressor parts")
气体空气压缩机的噪音水平是多少？
气体空气压缩机的噪音水平受多种因素影响，包括压缩机的设计、发动机类型、运行条件以及是否配备降噪装置。以下是详细说明：
1. 压缩机设计：
气体空气压缩机的设计会影响其噪音水平。一些压缩机在设计时就考虑到了降噪，采用隔音材料、减震材料和消音器等措施来最大限度地减少噪音产生。与开放式压缩机相比，带有封闭式机柜或隔音罩的压缩机往往噪音更低。
2. 发动机类型：
燃气空气压缩机所使用的发动机类型会影响噪音水平。燃气空气压缩机通常使用汽油或丙烷作为燃料的内燃机。与柴油发动机或电动机相比，汽油发动机往往产生更高的噪音。然而，发动机技术的进步使得噪音控制更加完善，从而制造出噪音更低的汽油发动机。
3. 运行条件：
气体空气压缩机的运行工况会影响其噪音水平。负载能力、运行速度和环境温度等因素都会影响噪音的产生量。与低负载或低转速运行的压缩机相比，高负载或高转速运行的压缩机可能会产生更大的噪音。
4. 降噪功能：
一些气体空气压缩机配备了降噪装置，以最大限度地减少噪音排放。这些装置可能包括内置消音器、隔音罩或吸音材料。这些装置有助于降低压缩机产生的噪音，从而降低其整体噪音水平。
5. 制造商规格：
制造商通常会提供其燃气空气压缩机的噪音等级规格。这些规格通常以分贝 (dB) 为单位，标明压缩机特定距离处的声压级 (SPL)。参考这些规格对于了解特定型号压缩机的预期噪音水平至关重要。
6. 距离和位置：
气体空气压缩机与听者之间的距离会影响感知到的噪音水平。由于声波会扩散，噪音水平会随着距离的增加而降低。将压缩机放置在隔离区域或远离人员活动空间的地方，有助于最大限度地减少噪音对周围环境的影响。
值得注意的是，气体空气压缩机，特别是用于工业或重型作业的压缩机，会产生相当大的噪音。职业健康与安全法规可能要求在噪音较大的压缩机附近工作的人员佩戴听力保护装置。
总体而言，燃气空气压缩机的噪音水平可能有所不同，因此在选择压缩机时，建议参考制造商的规格说明并考虑其降噪功能。适当的维护，例如定期润滑和检查部件，也有助于最大限度地降低噪音水平并确保最佳性能。
.webp "China manufacturer High Pressure 320bar Hydrogen Gas Piston Diaphragm Compressor air compressor parts")
What Are the Key Components of a Gas Air Compressor Control Panel?
A gas air compressor control panel typically consists of several key components. Here’s a detailed explanation:
1. Power Switch:
The power switch allows the operator to turn the compressor on or off. It is usually a toggle switch or a push-button switch located on the control panel.
2. Pressure Gauges:
Pressure gauges display the compressed air pressure at different stages of the compression process. Commonly, there are two pressure gauges: one to measure the incoming air pressure (suction pressure) and another to measure the outgoing compressed air pressure (discharge pressure).
3. Control Knobs or Buttons:
Control knobs or buttons are used to adjust and set various parameters of the compressor operation. These controls may include pressure settings, on/off timers, automatic start/stop functions, and other operational parameters specific to the compressor model.
4. Emergency Stop Button:
An emergency stop button is a critical safety feature that immediately shuts down the compressor in case of an emergency. Pressing the emergency stop button cuts off power to the compressor and stops its operation.
5. Motor Start/Stop Buttons:
Motor start and stop buttons allow the operator to manually start or stop the compressor motor. These buttons are used when manual control of the motor is required, such as during maintenance or troubleshooting.
6. Control Indicators:
Control indicators include various lights or LEDs that provide visual feedback about the compressor’s status and operation. These indicators may include power indicators, motor running indicators, pressure indicators, and fault indicators to signal any malfunctions or abnormal conditions.
7. Control Panel Display:
Some gas air compressors feature a control panel display that provides real-time information and feedback on the compressor’s performance. The display may show parameters such as operating pressure, temperature, maintenance alerts, fault codes, and other relevant information.
8. Start/Stop Control Circuit:
The start/stop control circuit is responsible for initiating and controlling the motor start and stop sequences. It typically includes relays, contactors, and other electrical components that enable the control panel to safely start and stop the compressor motor.
9. Safety and Protection Devices:
Gas air compressor control panels may incorporate safety and protection devices to safeguard the compressor and prevent potential damage or hazardous situations. These devices can include overload relays, thermal protection, pressure relief valves, and other safety features.
10. Control Panel Enclosure:
The control panel enclosure houses and protects the electrical components and wiring of the control panel. It provides insulation, protection from dust and moisture, and ensures the safety of the operator.
In summary, a gas air compressor control panel typically includes a power switch, pressure gauges, control knobs or buttons, emergency stop button, motor start/stop buttons, control indicators, control panel display (if applicable), start/stop control circuit, safety and protection devices, and a control panel enclosure. These components work together to monitor and control the compressor’s operation, ensure safety, and provide essential information to the operator.
.webp "China manufacturer High Pressure 320bar Hydrogen Gas Piston Diaphragm Compressor air compressor parts")
气体空气压缩机的工作原理是什么？
燃气空气压缩机的工作原理是利用燃气发动机驱动压缩泵，压缩泵吸入空气并将其压缩至更高的压力。压缩后的空气可用于各种用途。以下是燃气空气压缩机工作原理的详细说明：
1. 燃气发动机：
燃气空气压缩机以燃气发动机为动力源。燃气发动机通常使用汽油、柴油、天然气或丙烷作为燃料。发动机启动时，燃料在气缸内燃烧，产生旋转运动形式的机械能。
2. 压缩机泵：
燃气发动机通过机械连接（例如皮带或直接耦合）驱动压缩机泵。压缩机泵负责吸入大气空气并将其压缩至更高的压力。燃气空气压缩机中使用的压缩机泵类型多种多样，包括往复式、螺杆式和离心式，每种泵的工作原理各不相同。
3. 进气冲程：
在往复式压缩机中，当活塞在气缸内向下运动时，进气冲程开始。这会产生真空，使进气阀打开，大气被吸入气缸。在螺杆式或离心式压缩机中，压缩机工作时，空气会持续地通过进气口吸入。
4. 压缩冲程：
在往复式压缩机的压缩冲程中，活塞向上运动，减小气缸内的容积。这种压缩作用使空气被压缩，压力升高。在螺杆式压缩机中，两个相互啮合的螺杆旋转，将空气夹在中间并压缩。在离心式压缩机中，空气被高速旋转的叶轮加速并压缩。
5. 出院中风：
往复式压缩机中，空气压缩后，排气冲程开始。活塞向上运动，进一步减小气缸容积，并将压缩空气通过排气阀排出。在螺杆式压缩机中，随着相互啮合的螺杆持续旋转，压缩空气通过排气口排出。在离心式压缩机中，高压空气从叶轮排出到周围的蜗壳内。
6. 压力调节：
气体空气压缩机通常包含压力调节机构，用于控制压缩空气的输出压力。这可以通过压力开关、调节器或控制系统来实现，这些装置会根据所需的压力设定值来调节压缩机的运行。这些机构有助于为特定应用需求提供稳定可控的压缩空气供应。
7. 存储和应用：
气体空气压缩机产生的压缩空气通常储存在储气罐中，或直接用于各种应用。储气罐有助于稳定压力，并提供压缩空气的储备，以便立即使用。压缩空气可以从储气罐通过管道输送到气动工具、机械或其他需要压缩空气才能运行的设备。
总的来说，燃气空气压缩机的工作原理是利用燃气发动机驱动压缩泵，压缩泵吸入空气并将其压缩至更高的压力。压缩空气经过调节后可用于各种应用，为气动工具、机械和其他设备提供可靠的动力源。
editor by CX 2023-11-21