China Pneumatic Sintered Metal Brass Air Muffler

Description du produit

CZPT Silencieux frittés pourrait être utilisé avec outils pneumatiques, vannes, et des cylindres à réduire le bruit et en filtrant les gaz d'échappement.
Afin de réduire le bruit, d'améliorer la filtration et le débit, veuillez sélectionner les silencieux, les évents et les filtres CZPT comme suit :
Le niveau sonore, mesuré en décibels (dB), indique dans quelle mesure les silencieux frittés réduisent le bruit d'échappement de votre outil ou équipement.
Il est généralement recommandé de porter une protection auditive en cas d'exposition. supérieur à 80 dB.

Filtration : Les silencieux frittés piègent les particules pour purifier l'air rejeté dans l'environnement ou entrant dans votre équipement.
La taille des particules est mesurée en microns ; plus le nombre de microns est faible, plus les particules extraites de l'air sont petites.
Débit – Mesuré en mètres cubes standard par minute, ce débit correspond au débit d'air maximal que le produit peut supporter.
Veuillez noter que pour choisir la taille de tuyau appropriée, mesurez le diamètre intérieur fileté (DI) ou le diamètre extérieur (DE) de votre tuyau ou vanne.
CZPT propose généralement des silencieux frittés avec filetage standard. 1/8 à 1 1/2 pouce.
Silencieux frittés avec raccords de tuyauterie à visser dans NPT ou filetage métrique Orifices d'échappement.

 
Pneumatic Sintered Metal Brass Air Muffler

DALON Silencieux frittés FAQ :

Q: Usine ou société commerciale ?
UN: DALON, fondée en 2002, possède deux usines sous l'égide du groupe CZPT, avec des actionnaires : un atelier spécialisé dans les bagues en bronze fritté et un autre qui s'occupe de tous les filtres et silencieux frittés.

Q : Qu'est-ce que la quantité minimale de commande (MOQ) ?
UN: Nous prenons plaisir à grandir avec tous nos clients, quelle que soit l'importance de leurs commandes. Avec DALON, votre croissance ne fera que s'accroître.

Q : CZPT peut-il fabriquer des produits personnalisés ?
UN: Oui, CZPT propose des services de fabrication OEM/ODM

Q : Le dessin ou l'échantillon de conception sera-t-il protégé après son acquisition par CZPT ?
UN: DALON ne divulguera votre design à aucun tiers sans votre autorisation. Nous signerons généralement un accord de confidentialité avant toute réalisation de dessin ou d'échantillon.

Q : CZPT peut-il offrir des services de conception ?
UN: DALON possède un département R&D et peut vous proposer une conception spéciale répondant à vos exigences, avec des dessins 3D aux formats IGES/STEP, PDF/CAD aux formats DGW/DXF et des photos.

QEt un système qualité ?
UN: DALON possède un système de qualité ISO9002 et effectue des contrôles internes à l'aide d'équipements de test à bulles, de machines à mesurer tridimensionnelles (MMT), de testeurs de dureté, de testeurs de rugosité, de testeurs de brouillard salin, de tests de résistance à la traction, de pieds à coulisse, de micromètres, de jauges de hauteur, de jauges annulaires et à bouchon, de jauges à broches, etc.

Q : UNÀ propos de l'échantillon ?
UN: DALON peut fournir des échantillons GRATUITS, mais les clients doivent prendre en charge les frais d'outillage, le cas échéant, ainsi que les frais de livraison.

Q : Frais d'outillage ?
UN: Les frais d'outillage ne sont facturés qu'une seule fois lors de la première commande ; pour toutes les commandes ultérieures, aucun autre frais ne sera facturé, même en cas de réparation ou de maintenance de l'outillage.

Q : LTemps mort ?
UN: DALON effectue généralement la livraison sous 21 jours après réception de l'acompte. Les articles en stock peuvent être livrés sous 3 jours. Si l'article nécessite un outillage spécifique, veuillez prévoir un délai supplémentaire de 7 jours.

Q : Conditions de paiement ?
UN: Acompte 50% et solde contre copie du connaissement. Pour les relations commerciales à long terme, CZPT propose des conditions de paiement plus avantageuses.

QComment gérer les plaintes, le cas échéant ?
UN: En cas de réclamation, veuillez contacter CZPT dans les 30 jours suivant la réception de la marchandise. CZPT identifiera les causes du problème et mettra en œuvre des mesures correctives et préventives. CZPT assumera l'entière responsabilité du traitement des réclamations.

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with 2 digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between 40 percent and 80 percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.