Item Description
Item functionality and parameters:
| モデル | Lowest absolute suction strain hPa |
Supreme strain with first phase atmospheric ejecto hPa |
Maximum air volume mthree/min |
Rotating velocity r/分 |
maximum shaft 力 kW |
モーター Electrical power kW |
inhale and discharge caliber |
| 2BEA 103- |
33 | 18 | 5 | 1300 | seven | seven.5 | 65 |
| six | 1450 | eight | eleven | ||||
| 6.five | 1625 | 10 | 11 | ||||
| 7 | 1750 | eleven | 15 | ||||
| 2BEA 153- |
33 | 18 | 7.five | 1300 | 11 | 15 | 100 |
| nine | 1450 | fourteen | 15 | ||||
| 11 | 1625 | sixteen | 18.5 | ||||
| twelve | 1750 | 19 | 22 | ||||
| 2BEA 203- |
33 | 18 | 16 | 880 | 25 | 30 | 125 |
| 19 | 980 | thirty | 37 | ||||
| 21 | 1100 | 36 | 45 | ||||
| 22 | 1170 | forty | forty five | ||||
| 2BEA 253- |
33 | 18 | thirty | 590 | 37 | 45 | 150 |
| 35 | 660 | forty five | 55 | ||||
| 40 | 740 | fifty five | 75 | ||||
| forty four | 820 | sixty five | 90 | ||||
| 2BEA 303- |
33 | 18 | 47 | 530 | fifty eight | 75 | 200 |
| 52 | 590 | 67 | 75 | ||||
| 60 | 660 | eighty | 90 | ||||
| 64 | 740 | 90 | one hundred ten | ||||
| 2BEA 353- |
33 | 18 | 68 | 490 | 91 | 110 | 250 |
| 75 | 530 | one hundred and five | 132 | ||||
| eighty five | 590 | 126 | a hundred and sixty | ||||
| 95 | 660 | 154 | 185 | ||||
| 2BEA 400- |
33 | 18 | eighty.8 | 330 | 102 | 132 | 300 |
| 87.six | 372 | 116 | 160 | ||||
| 99. | 420 | 136.5 | 185 | ||||
| 112.3 | 472 | 168 | 200 | ||||
| 126 | 530 | 212 | 250 | ||||
| 2BEA 420- |
33 | 18 | 87.six | 372 | 116 | a hundred and sixty | 300 |
| ninety nine. | 420 | 136.five | 185 | ||||
| 112.three | 472 | 168 | 200 | ||||
| 126 | 530 | 212 | 250 | ||||
| 140 | 595 | 238 | 280 | ||||
| Be aware 1: The standard parameters are the values beneath the situations that the temperature is 20°C (air),the inlet h2o temperature is 15°C, the exhaust pressure is 1013hPa, the relative air humidity is 50%, and the value below the issue of the specified pace r/min. two: Each pump is allowed to have many matching speeds, and the pumping quantity and shaft power correspond to them. |
|||||||
|
US $2,000-5,000 / Piece | |
1 Piece (Min. Order) |
###
| アフターサービス： | サポート |
|---|---|
| 保証： | 1年 |
| Oil or Not: | Oil Free |
| Structure: | Rotary Vacuum Pump |
| Exhauster Method: | Kinetic Vacuum Pump |
| Vacuum Degree: | High Vacuum |
###
| サンプル： |
US$ 5000/Piece
1個（最小注文数） |
|---|
###
| カスタマイズ: |
利用可能
|
|---|
###
| モデル | Lowest absolute suction pressure hPa |
Ultimate pressure with first stage atmospheric ejecto hPa |
Maximum air volume m3/min |
Rotating speed r/分 |
maximum shaft 力 kW |
モーター 力 kW |
inhale and discharge caliber |
| 2BEA 103-0 |
33 | 18 | 5 | 1300 | 7 | 7.5 | 65 |
| 6 | 1450 | 8 | 11 | ||||
| 6.5 | 1625 | 10 | 11 | ||||
| 7 | 1750 | 11 | 15 | ||||
| 2BEA 153-0 |
33 | 18 | 7.5 | 1300 | 11 | 15 | 100 |
| 9 | 1450 | 14 | 15 | ||||
| 11 | 1625 | 16 | 18.5 | ||||
| 12 | 1750 | 19 | 22 | ||||
| 2BEA 203-0 |
33 | 18 | 16 | 880 | 25 | 30 | 125 |
| 19 | 980 | 30 | 37 | ||||
| 21 | 1100 | 36 | 45 | ||||
| 22 | 1170 | 40 | 45 | ||||
| 2BEA 253-0 |
33 | 18 | 30 | 590 | 37 | 45 | 150 |
| 35 | 660 | 45 | 55 | ||||
| 40 | 740 | 55 | 75 | ||||
| 44 | 820 | 65 | 90 | ||||
| 2BEA 303-0 |
33 | 18 | 47 | 530 | 58 | 75 | 200 |
| 52 | 590 | 67 | 75 | ||||
| 60 | 660 | 80 | 90 | ||||
| 64 | 740 | 90 | 110 | ||||
| 2BEA 353-0 |
33 | 18 | 68 | 490 | 91 | 110 | 250 |
| 75 | 530 | 105 | 132 | ||||
| 85 | 590 | 126 | 160 | ||||
| 95 | 660 | 154 | 185 | ||||
| 2BEA 400-0 |
33 | 18 | 80.8 | 330 | 102 | 132 | 300 |
| 87.6 | 372 | 116 | 160 | ||||
| 99.0 | 420 | 136.5 | 185 | ||||
| 112.3 | 472 | 168 | 200 | ||||
| 126 | 530 | 212 | 250 | ||||
| 2BEA 420-0 |
33 | 18 | 87.6 | 372 | 116 | 160 | 300 |
| 99.0 | 420 | 136.5 | 185 | ||||
| 112.3 | 472 | 168 | 200 | ||||
| 126 | 530 | 212 | 250 | ||||
| 140 | 595 | 238 | 280 | ||||
| 注記 1: The basic parameters are the values under the conditions that the temperature is 20°C (air),the inlet water temperature is 15°C, the exhaust pressure is 1013hPa, the relative air humidity is 50%, and the value under the condition of the specified speed r/min. 2: Each pump is allowed to have several matching speeds, and the pumping volume and shaft power correspond to them. |
|||||||
|
US $2,000-5,000 / Piece | |
1 Piece (Min. Order) |
###
| アフターサービス： | サポート |
|---|---|
| 保証： | 1年 |
| Oil or Not: | Oil Free |
| Structure: | Rotary Vacuum Pump |
| Exhauster Method: | Kinetic Vacuum Pump |
| Vacuum Degree: | High Vacuum |
###
| サンプル： |
US$ 5000/Piece
1個（最小注文数） |
|---|
###
| カスタマイズ: |
利用可能
|
|---|
###
| モデル | Lowest absolute suction pressure hPa |
Ultimate pressure with first stage atmospheric ejecto hPa |
Maximum air volume m3/min |
Rotating speed r/分 |
maximum shaft 力 kW |
モーター 力 kW |
inhale and discharge caliber |
| 2BEA 103-0 |
33 | 18 | 5 | 1300 | 7 | 7.5 | 65 |
| 6 | 1450 | 8 | 11 | ||||
| 6.5 | 1625 | 10 | 11 | ||||
| 7 | 1750 | 11 | 15 | ||||
| 2BEA 153-0 |
33 | 18 | 7.5 | 1300 | 11 | 15 | 100 |
| 9 | 1450 | 14 | 15 | ||||
| 11 | 1625 | 16 | 18.5 | ||||
| 12 | 1750 | 19 | 22 | ||||
| 2BEA 203-0 |
33 | 18 | 16 | 880 | 25 | 30 | 125 |
| 19 | 980 | 30 | 37 | ||||
| 21 | 1100 | 36 | 45 | ||||
| 22 | 1170 | 40 | 45 | ||||
| 2BEA 253-0 |
33 | 18 | 30 | 590 | 37 | 45 | 150 |
| 35 | 660 | 45 | 55 | ||||
| 40 | 740 | 55 | 75 | ||||
| 44 | 820 | 65 | 90 | ||||
| 2BEA 303-0 |
33 | 18 | 47 | 530 | 58 | 75 | 200 |
| 52 | 590 | 67 | 75 | ||||
| 60 | 660 | 80 | 90 | ||||
| 64 | 740 | 90 | 110 | ||||
| 2BEA 353-0 |
33 | 18 | 68 | 490 | 91 | 110 | 250 |
| 75 | 530 | 105 | 132 | ||||
| 85 | 590 | 126 | 160 | ||||
| 95 | 660 | 154 | 185 | ||||
| 2BEA 400-0 |
33 | 18 | 80.8 | 330 | 102 | 132 | 300 |
| 87.6 | 372 | 116 | 160 | ||||
| 99.0 | 420 | 136.5 | 185 | ||||
| 112.3 | 472 | 168 | 200 | ||||
| 126 | 530 | 212 | 250 | ||||
| 2BEA 420-0 |
33 | 18 | 87.6 | 372 | 116 | 160 | 300 |
| 99.0 | 420 | 136.5 | 185 | ||||
| 112.3 | 472 | 168 | 200 | ||||
| 126 | 530 | 212 | 250 | ||||
| 140 | 595 | 238 | 280 | ||||
| 注記 1: The basic parameters are the values under the conditions that the temperature is 20°C (air),the inlet water temperature is 15°C, the exhaust pressure is 1013hPa, the relative air humidity is 50%, and the value under the condition of the specified speed r/min. 2: Each pump is allowed to have several matching speeds, and the pumping volume and shaft power correspond to them. |
|||||||
ご自宅に最適なエアコンプレッサーの選び方
You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.
正の変位
A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
容積式空気圧縮機は、往復運動するピストンを用いて空気を圧縮します。これにより圧縮室内の空気量が減り、圧力が所定のレベルに達すると吐出弁が開きます。これらの圧縮機は、自転車の空気入れやその他の空気圧工具に使用されています。容積式空気圧縮機には複数の吸気口があり、様々な構成があります。容積式空気圧縮機には単動式と複動式のピストンがあり、オイル潤滑式とオイルフリー式があります。
容積式空気圧縮機は、動圧式圧縮機とは異なります。圧縮室に空気を吸い込み、バルブが開くと圧力を解放します。容積式圧縮機は産業用途で広く使用されており、単動式、複動式、油潤滑式などがあります。大型ピストン圧縮機は、通気孔付きの中間部品と、ピストンピンに取り付けられたクロスヘッドを備えています。小型モデルは、ベアリング付きの密閉型クランクケースを採用しています。
オイルフリー
Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
用途において高い純度が求められる場合、オイルフリーのエアコンプレッサーは最適な選択肢です。多くの用途では超高純度の空気が必要とされ、わずか一滴の油でも製品の劣化や生産設備の損傷につながる可能性があります。オイルフリーのエアコンプレッサーは、健康リスクの低減に加え、油汚染に伴うコスト削減と漏洩リスクの最小化を実現します。また、油の回収、廃棄、処理も不要になります。
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.
単段式
単段式空気圧縮機は、単一の空気圧工具または装置に動力を供給するように設計されています。これらの機械は一般的に二段式圧縮機よりも小型で、発生する熱とエネルギーも少なくなっています。これらの機械は重工業向けには設計されていませんが、自動車修理工場、ガソリンスタンド、各種製造工場など、さまざまな用途で非常に効果的です。また、空気流量の要求が少ない狭い空間に適しているため、井戸掘削にも使用できます。
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
CFM
空気圧縮機の毎分立方フィート（CFM）は、機械の出力値を表します。CFM値を計算するには、まず圧縮機の仕様を確認します。圧縮機が何立方フィートの空気を収容できるか、そして何ポンド/平方インチの空気を圧縮できるかを知る必要があります。これらの情報が分かれば、CFM値を計算できます。計算結果に基づいて、ニーズに合った適切な空気圧縮機を選ぶことができます。
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
エアコンプレッサーのCFMを計算するには、まずタンク容量を調べます。次に、この容量にタンクを満タンにするのにかかる時間を掛けます。そして、その結果を60秒で割るとCFMが算出されます。機械がどれだけの空気を保持できるかがわかれば、適切なエアコンプレッサーを選ぶことができます。狭い場所で作業する場合は、タンク容量の大きい機種を購入することをお勧めします。
PSI
The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
電源
エアコンプレッサーの動作には、電源が非常に重要です。適切な電圧と電流が供給されないと、エアコンプレッサーは正常に動作しません。電源はコンプレッサーの近くに設置し、コンセントに差し込めるようにする必要があります。コンセントから遠すぎると、コンプレッサーが十分な圧力を発生させられない場合があります。その場合、コンプレッサー内部のヒューズが作動して、使用者を保護します。電源はコンプレッサーから安全な距離に設置してください。
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.
editor by czh 2023-01-30